From: Juergen Borleis <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/2] Documentation: add some info about the reset reason framework
Date: Tue, 16 Jun 2015 14:02:24 +0200 [thread overview]
Message-ID: <1434456145-21912-2-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1434456145-21912-1-git-send-email-jbe@pengutronix.de>
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/user/reset-reason.rst | 47 +++++++++++++++++++++++++++++++++++++
Documentation/user/user-manual.rst | 1 +
2 files changed, 48 insertions(+)
create mode 100644 Documentation/user/reset-reason.rst
diff --git a/Documentation/user/reset-reason.rst b/Documentation/user/reset-reason.rst
new file mode 100644
index 0000000..a4872fa
--- /dev/null
+++ b/Documentation/user/reset-reason.rst
@@ -0,0 +1,47 @@
+.. _reset_reason:
+
+Reset Reason
+------------
+
+To handle a device in a secure and safty manner many applications are using
+a watchdog or other ways to reset a system to bring it back into life if it
+hangs or crashes somehow.
+
+In these cases the hardware restarts and runs the bootloader again. Depending on
+the root cause of the hang or crash, the bootloader sometimes should not just
+re-start the main system again. Maybe it should do some kind of recovery instead.
+For example it should wait for another update (for the case the cause of a
+crash is a failed update) or should start into a fall back system instead.
+
+In order to handle failing systems gracefully the bootloader needs the
+information why it runs. This is called the "reset reason". It is provided by
+the global variable ``system.reset`` and can be used in scripts via
+``$global.system.reset``.
+
+The following values can help to detect the reason why the bootloader runs:
+
+* ``unknown``: the software wasn't able to detect the reset cause or there
+ isn't support for this feature at all.
+* ``POR`` (Power On Reset): a cold start. The power of the system
+ was switched on. This is a regular state and nothing to worry about.
+* ``RST`` (ReSeT): a warm start. The user has triggered a reset somehow. This
+ is a regular state and nothing to worry about.
+* ``WDG`` (WatchDoG): also some kind of warm start, but triggered by a watchdog
+ unit. It depends on the application if this reason signals a regular state
+ and therefore nothing to worry about, or if this state was entered by a hanging
+ or crashed system and must implicitly be handled.
+* ``WKE`` (WaKEup): a mixture of cold and warm start. The system is woken up
+ from some state of suspend. This is a regular state and nothing to worry
+ about.
+* ``JTAG``: an external JTAG based debugger has triggered the reset.
+* ``THERM`` (THERMal): some SoCs are able to detect if they got reset in
+ response to an overtemperature event. This can be a regular state and nothing
+ to worry about (the reset has brought the system back into a safe state) or
+ must implicitly be handled.
+* ``EXT`` (EXTernal): some SoCs have special device pins for external reset
+ signals other than the ``RST`` one. Application specific how to handle this
+ state.
+
+It depends on your board/SoC and its features if the hardware is able to detect
+these reset reasons. Most of the time only ``POR`` and ``RST`` are supported
+but often ``WDG`` as well.
diff --git a/Documentation/user/user-manual.rst b/Documentation/user/user-manual.rst
index 3d68bbb..1fc6883 100644
--- a/Documentation/user/user-manual.rst
+++ b/Documentation/user/user-manual.rst
@@ -28,6 +28,7 @@ Contents:
ubi
booting-linux
system-setup
+ reset-reason
* :ref:`search`
* :ref:`genindex`
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-06-16 12:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-16 12:02 [PATCH] Add some doc Juergen Borleis
2015-06-16 12:02 ` Juergen Borleis [this message]
2015-06-16 12:02 ` [PATCH 2/2] Documentation: add some info about the reset variants Juergen Borleis
2015-06-17 6:19 ` [PATCH] Add some doc Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434456145-21912-2-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox