From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from forward4l.mail.yandex.net ([2a02:6b8:0:1819::4]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZAaB3-00032K-Bm for barebox@lists.infradead.org; Thu, 02 Jul 2015 08:49:02 +0000 From: Alexander Smirnov Date: Thu, 2 Jul 2015 11:50:16 +0300 Message-Id: <1435827017-1999-3-git-send-email-alllecs@yandex.ru> In-Reply-To: <1435827017-1999-1-git-send-email-alllecs@yandex.ru> References: <1435827017-1999-1-git-send-email-alllecs@yandex.ru> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [RFC V4 2/3] ddr_spd: add routune for printing SPD contents in human readable format To: Sascha Hauer Cc: barebox@lists.infradead.org, Alexander Smirnov Signed-off-by: Alexander Smirnov --- common/ddr_spd.c | 290 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/ddr_spd.h | 1 + 2 files changed, 291 insertions(+) diff --git a/common/ddr_spd.c b/common/ddr_spd.c index ea0b529..6757d58 100644 --- a/common/ddr_spd.c +++ b/common/ddr_spd.c @@ -61,3 +61,293 @@ uint32_t ddr3_spd_checksum_pass(const struct ddr3_spd_eeprom_s *spd) return 0; } + +static char *heights[] = { + "<25.4", + "25.4", + "25.4 - 30.0", + "30.0", + "30.5", + "> 30.5", +}; + +static char *sdram_voltage_interface_level[] = { + "TTL (5V tolerant)", + "LVTTL (not 5V tolerant)", + "HSTL 1.5V", + "SSTL 3.3V", + "SSTL 2.5V", + "SSTL 1.8V", +}; + +static char *ddr2_module_types[] = { + "RDIMM (133.35 mm)", + "UDIMM (133.25 mm)", + "SO-DIMM (67.6 mm)", + "Micro-DIMM (45.5 mm)", + "Mini-RDIMM (82.0 mm)", + "Mini-UDIMM (82.0 mm)", +}; + +static char *refresh[] = { + "15.625", + "3.9", + "7.8", + "31.3", + "62.5", + "125", +}; + +static char *type_list[] = { + "Reserved", + "FPM DRAM", + "EDO", + "Pipelined Nibble", + "SDR SDRAM", + "Multiplexed ROM", + "DDR SGRAM", + "DDR SDRAM", + [SPD_MEMTYPE_DDR2] = "DDR2 SDRAM", + "FB-DIMM", + "FB-DIMM Probe", + [SPD_MEMTYPE_DDR3] = "DDR3 SDRAM", +}; + +static int funct(uint8_t addr) +{ + int t; + + t = ((addr >> 4) * 10 + (addr & 0xf)); + + return t; +} + +static int des(uint8_t byte) +{ + int k; + + k = (byte & 0x3) * 10 / 4; + + return k; +} + +static int integ(uint8_t byte) +{ + int k; + + k = (byte >> 2); + + return k; +} + +static int ddr2_sdram_ctime(uint8_t byte) +{ + int ctime; + + ctime = (byte >> 4) * 100; + if ((byte & 0xf) <= 9) + ctime += (byte & 0xf) * 10; + else if ((byte & 0xf) == 10) + ctime += 25; + else if ((byte & 0xf) == 11) + ctime += 33; + else if ((byte & 0xf) == 12) + ctime += 66; + else if ((byte & 0xf) == 13) + ctime += 75; + + return ctime; +} + +void ddr_spd_print(uint8_t *record) +{ + int highestCAS = 0; + int cas[256]; + int i, i_i, k, x, y; + int ddrclk, tbits, pcclk; + int trcd, trp, tras; + int ctime; + uint8_t parity; + char *ref, *sum; + struct ddr2_spd_eeprom_s *s = (struct ddr2_spd_eeprom_s *)record; + + ctime = ddr2_sdram_ctime(s->clk_cycle); + ddrclk = 2 * (1000 / ctime) * 100; + tbits = (s->res_7 << 8) + (s->dataw); + if ((s->config & 0x03) == 1) + tbits = tbits - 8; + + pcclk = ddrclk * tbits / 8; + pcclk = pcclk - (pcclk % 100); + i_i = (s->nrow_addr & 0x0f) + (s->ncol_addr & 0x0f) - 17; + k = ((s->mod_ranks & 0x7) + 1) * s->nbanks; + trcd = ((s->trcd >> 2) + ((s->trcd & 3) * 0.25)) / ctime * 100; + trp = ((s->trp >> 2) + ((s->trp & 3) * 0.25)) / ctime * 100; + tras = s->tras * 100 / ctime ; + x = (int)(ctime / 100); + y = (ctime - (int)((ctime / 100) * 100)) / 10; + + for (i_i = 2; i_i < 7; i_i++) { + if (s->cas_lat & 1 << i_i) { + highestCAS = i_i; + cas[highestCAS]++; + } + } + + if (ddr2_spd_checksum_pass(s)) + sum = "ERR"; + else + sum = "OK"; + + printf("---=== SPD EEPROM Information ===---\n"); + printf("%-50s %s (0x%0X)\n", "EEPROM Checksum of bytes 0-62", + sum, s->cksum); + printf("%-50s %d\n", "# of bytes written to SDRAM EEPROM", + s->info_size); + printf("%-50s %d\n", "Total number of bytes in EEPROM", + 1 << (s->chip_size)); + + if (s->mem_type < ARRAY_SIZE(type_list)) + printf("%-50s %s\n", "Fundamental Memory type", + type_list[s->mem_type]); + else + printf("%-50s (%02x)\n", "Warning: unknown memory type", + s->mem_type); + + printf("%-50s %x.%x\n", "SPD Revision", s->spd_rev >> 4, + s->spd_rev & 0x0f); + if (s->mem_type != SPD_MEMTYPE_DDR2) { + printf("Can't dump extended information for non-DDR2 memory\n"); + return; + } + + printf("\n---=== Memory Characteristics ===---\n"); + printf("%-50s %d MHz (PC2-%d)\n", "Maximum module speed", + ddrclk, pcclk); + if (i_i > 0 && i_i <= 12 && k > 0) + printf("%-50s %d MB\n", "Size", (1 << i_i) * k); + else + printf("%-50s INVALID: %02x %02x %02x %02x\n", "Size", + s->nrow_addr, s->ncol_addr, s->mod_ranks, s->nbanks); + + printf("%-50s %d x %d x %d x %d\n", "Banks x Rows x Columns x Bits", + s->nbanks, s->nrow_addr, s->ncol_addr, s->dataw); + printf("%-50s %d\n", "Ranks", (s->mod_ranks & 0x7) + 1); + printf("%-50s %d bits\n", "SDRAM Device Width", s->primw); + + if (s->mod_ranks >> 5 < ARRAY_SIZE(heights)) + printf("%-50s %s mm\n", "Module Height", + heights[s->mod_ranks >> 5]); + else + printf("Error height\n"); + + if ((fls(s->dimm_type) - 1) < ARRAY_SIZE(ddr2_module_types)) + printf("%-50s %s\n", "Module Type", + ddr2_module_types[fls(s->dimm_type) - 1]); + else + printf("Error module type\n"); + + printf("%-50s ", "DRAM Package "); + if ((s->mod_ranks & 0x10) == 1) + printf("Stack\n"); + else + printf("Planar\n"); + if (s->voltage < 7) + printf("%-50s %s\n", "Voltage Interface Level", + sdram_voltage_interface_level[s->voltage]); + else + printf("Error Voltage Interface Level\n"); + + printf("%-50s ", "Module Configuration Type "); + + parity = s->config & 0x07; + if (parity == 0) + printf("No Parity\n"); + + if ((parity & 0x03) == 0x01) + printf("Data Parity\n"); + if (parity & 0x02) + printf("Data ECC\n"); + + if (parity & 0x04) + printf("Address/Command Parity\n"); + + if ((s->refresh >> 7) == 1) + ref = "- Self Refresh"; + else + ref = " "; + + printf("%-50s Reduced (%s us) %s\n", "Refresh Rate", + refresh[s->refresh & 0x7f], ref); + printf("%-50s %d, %d\n", "Supported Burst Lengths", + s->burstl & 4, s->burstl & 8); + + printf("%-50s %dT\n", "Supported CAS Latencies (tCL)", highestCAS); + printf("%-50s %d-%d-%d-%d as DDR2-%d\n", "tCL-tRCD-tRP-tRAS", + highestCAS, trcd, trp, tras, ddrclk); + printf("%-50s %d.%d ns at CAS %d\n", "Minimum Cycle Time", x, y, + highestCAS); + printf("%-50s 0.%d%d ns at CAS %d\n", "Maximum Access Time", + (s->clk_access >> 4), (s->clk_access & 0xf), highestCAS); + printf("%-50s %d ns\n", "Maximum Cycle Time (tCK max)", + (s->tckmax >> 4) + (s->tckmax & 0x0f)); + + printf("\n---=== Timing Parameters ===---\n"); + printf("%-50s 0.%d ns\n", + "Address/Command Setup Time Before Clock (tIS)", + funct(s->ca_setup)); + printf("%-50s 0.%d ns\n", "Address/Command Hold Time After Clock (tIH)", + funct(s->ca_hold)); + printf("%-50s 0.%d%d ns\n", "Data Input Setup Time Before Strobe (tDS)", + s->data_setup >> 4, s->data_setup & 0xf); + printf("%-50s 0.%d%d ns\n", "Data Input Hold Time After Strobe (tDH)", + s->data_hold >> 4, s->data_hold & 0xf); + + printf("%-50s %d.%d ns\n", "Minimum Row Precharge Delay (tRP)", + integ(s->trp), des(s->trp)); + printf("%-50s %d.%d ns\n", + "Minimum Row Active to Row Active Delay (tRRD)", + integ(s->trrd), des(s->trrd)); + printf("%-50s %d.%d ns\n", "Minimum RAS# to CAS# Delay (tRCD)", + integ(s->trcd), des(s->trcd)); + printf("%-50s %d ns\n", "Minimum RAS# Pulse Width (tRAS)", + ((s->tras & 0xfc) + (s->tras & 0x3))); + printf("%-50s %d.%d ns\n", "Write Recovery Time (tWR)", + integ(s->twr), des(s->twr)); + printf("%-50s %d.%d ns\n", "Minimum Write to Read CMD Delay (tWTR)", + integ(s->twtr), des(s->twtr)); + printf("%-50s %d.%d ns\n", + "Minimum Read to Pre-charge CMD Delay (tRTP)", + integ(s->trtp), des(s->trtp)); + printf("%-50s %d ns\n", "Minimum Active to Auto-refresh Delay (tRC)", + s->trc); + printf("%-50s %d ns\n", "Minimum Recovery Delay (tRFC)", s->trfc); + printf("%-50s 0.%d ns\n", "Maximum DQS to DQ Skew (tDQSQ)", s->tdqsq); + printf("%-50s 0.%d ns\n", "Maximum Read Data Hold Skew (tQHS)", + s->tqhs); + + printf("\n---=== Manufacturing Information ===---\n"); + + printf("%-50s", "Manufacturer JEDEC ID"); + for (i = 64; i < 72; i++) + printf(" %02x", record[i]); + + printf("\n"); + if (s->mloc) + printf("%-50s 0x%02x\n", "Manufacturing Location Code", + s->mloc); + + printf("%-50s ", "Part Number"); + for (i = 73; i < 91; i++) { + if (record[i] >= 32 && record[i] < 127) + printf("%c", record[i]); + else + printf("%d", record[i]); + } + printf("\n"); + printf("%-50s 20%d-W%d\n", "Manufacturing Date", record[93], + record[94]); + printf("%-50s 0x", "Assembly Serial Number"); + for (i = 95; i < 99; i++) + printf("%02X", record[i]); +} diff --git a/include/ddr_spd.h b/include/ddr_spd.h index fc03bac..01fe73c 100644 --- a/include/ddr_spd.h +++ b/include/ddr_spd.h @@ -228,6 +228,7 @@ struct ddr3_spd_eeprom_s { uint8_t cust[80]; /* 176-255 Open for Customer Use */ }; +extern void ddr_spd_print(uint8_t *record); extern uint32_t ddr3_spd_checksum_pass(const struct ddr3_spd_eeprom_s *spd); extern uint32_t ddr2_spd_checksum_pass(const struct ddr2_spd_eeprom_s *spd); -- 2.1.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox