From: Teresa Remmet <t.remmet@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH 5/7] ARM: phytec-som-am335x: Add support for 1024MiB RAM on one chip
Date: Fri, 17 Jul 2015 13:13:51 +0200 [thread overview]
Message-ID: <1437131633-9590-5-git-send-email-t.remmet@phytec.de> (raw)
In-Reply-To: <1437131633-9590-1-git-send-email-t.remmet@phytec.de>
Added support for IM8G16D3FBBG15EI 1024MiB RAM on one chip.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
arch/arm/boards/phytec-som-am335x/lowlevel.c | 1 +
arch/arm/boards/phytec-som-am335x/ram-timings.h | 22 +++++++++++++++++++++-
images/Makefile.am33xx | 6 ++++++
3 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/phytec-som-am335x/lowlevel.c b/arch/arm/boards/phytec-som-am335x/lowlevel.c
index 948bfa5..0ff62a3 100644
--- a/arch/arm/boards/phytec-som-am335x/lowlevel.c
+++ b/arch/arm/boards/phytec-som-am335x/lowlevel.c
@@ -124,6 +124,7 @@ PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_128mb, am335x_phytec_phycore_s
PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_256mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J128M16125IT_256MB);
PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_512mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J256M16HA15EIT_512MB);
PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_2x512mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J512M8125IT_2x512MB);
+PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_1024mb, am335x_phytec_phycore_som_mlo, PHYCORE_IM8G16D3FBBG15EI_1024MB);
PHYTEC_ENTRY(start_am33xx_phytec_phycore_sdram, am335x_phytec_phycore_som);
PHYTEC_ENTRY(start_am33xx_phytec_phycore_no_spi_sdram, am335x_phytec_phycore_som_no_spi);
diff --git a/arch/arm/boards/phytec-som-am335x/ram-timings.h b/arch/arm/boards/phytec-som-am335x/ram-timings.h
index 3dcee20..698b073 100644
--- a/arch/arm/boards/phytec-som-am335x/ram-timings.h
+++ b/arch/arm/boards/phytec-som-am335x/ram-timings.h
@@ -29,6 +29,7 @@ enum {
PHYCORE_MT41J64M1615IT_128MB,
PHYCORE_MT41J256M16HA15EIT_512MB,
PHYCORE_MT41J512M8125IT_2x512MB,
+ PHYCORE_IM8G16D3FBBG15EI_1024MB,
PHYCARD_NT5CB128M16BP_256MB,
};
@@ -133,7 +134,7 @@ struct am335x_sdram_timings physom_timings[] = {
},
},
- /* 1024MB */
+ /* 2x512MB */
[PHYCORE_MT41J512M8125IT_2x512MB] = {
.regs = {
.emif_read_latency = 0x7,
@@ -152,6 +153,25 @@ struct am335x_sdram_timings physom_timings[] = {
},
},
+ /* 1024MB */
+ [PHYCORE_IM8G16D3FBBG15EI_1024MB] = {
+ .regs = {
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAE4DB,
+ .emif_tim2 = 0x268F7FDA,
+ .emif_tim3 = 0x501F88BF,
+ .sdram_config = 0x61C053B2,
+ .zq_config = 0x50074BE4,
+ .sdram_ref_ctrl = 0x00000C30
+ },
+ .data = {
+ .rd_slave_ratio0 = 0x33,
+ .wr_dqs_slave_ratio0 = 0x4a,
+ .fifo_we_slave_ratio0 = 0xa4,
+ .wr_slave_ratio0 = 0x85,
+ },
+ },
+
/* 256MB */
[PHYCARD_NT5CB128M16BP_256MB] = {
.regs = {
diff --git a/images/Makefile.am33xx b/images/Makefile.am33xx
index 657aeb0..df77f19 100644
--- a/images/Makefile.am33xx
+++ b/images/Makefile.am33xx
@@ -57,6 +57,12 @@ FILE_barebox-am33xx-phytec-phycore-mlo-2x512mb.spi.img = start_am33xx_phytec_phy
am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-2x512mb.img
am33xx-mlospi-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-2x512mb.spi.img
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sram_1024mb
+FILE_barebox-am33xx-phytec-phycore-mlo-1024mb.img = start_am33xx_phytec_phycore_sram_1024mb.pblx.mlo
+FILE_barebox-am33xx-phytec-phycore-mlo-1024mb.spi.img = start_am33xx_phytec_phycore_sram_1024mb.pblx.mlospi
+am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-1024mb.img
+am33xx-mlospi-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-1024mb.spi.img
+
pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phyflex_sdram
FILE_barebox-am33xx-phytec-phyflex.img = start_am33xx_phytec_phyflex_sdram.pblx
am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phyflex.img
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-07-17 11:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-17 11:13 [PATCH 1/7] mtd: core: Check partitions for empty string Teresa Remmet
2015-07-17 11:13 ` [PATCH 2/7] drivers: i2c: Only register available devices Teresa Remmet
2015-07-17 14:59 ` Jan Lübbe
2015-07-17 11:13 ` [PATCH 3/7] ARM: dts: am335x-phytec boards: Fixup spi flash node name Teresa Remmet
2015-07-17 11:13 ` [PATCH 4/7] ARM: dts: phyFLEX-AM335x-som: Disable eeprom on default Teresa Remmet
2015-07-17 11:13 ` Teresa Remmet [this message]
2015-07-17 11:13 ` [PATCH 6/7] ARM: dts: Add support for all phyCORE-AM335x options Teresa Remmet
2015-07-17 11:13 ` [PATCH 7/7] ARM: dts: Add support for all phyFLEX-AM335x options Teresa Remmet
2015-07-20 5:14 ` [PATCH 1/7] mtd: core: Check partitions for empty string Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437131633-9590-5-git-send-email-t.remmet@phytec.de \
--to=t.remmet@phytec.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox