From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [RFC v2 16/16] sandbox_defconfig: switch to picotcp
Date: Sun, 19 Jul 2015 23:07:23 +0300 [thread overview]
Message-ID: <1437336443-8076-17-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1437336443-8076-1-git-send-email-antonynpavlov@gmail.com>
Picotcp sandbox barebox howto
=============================
Compile sandbox barebox:
$ cd barebox.git
$ unset ARCH
$ unset CROSS_COMPILE
$ make sandbox_defconfig
...
$ make
Run barebox:
$ su
# ./barebox
Testing ping
------------
While sandbox barebox is running setup a IP-address
for your host 'barebox' network interface, e.g.:
# ifconfig barebox 192.168.1.1
Next, in sandbox barebox console setup network interface
and try to ping host:
barebox:/ ifconfig eth 192.168.1.2 255.255.255.0
Assigned ipv4 192.168.1.2 to device eth
barebox:/ picoping 192.168.1.1
48 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=1 ms
...
48 bytes from 192.168.1.1: icmp_req=10 ttl=64 time=0 ms
Testing domain name resolving
-----------------------------
Install simple maradns name server on the host.
Edit /etc/maradns/mararc config file, add these lines:
csv2 = {}
csv2["example.com."] = "db.example.com"
bind_address = "192.168.1.1"
Edit /etc/maradns/db.example.com, add these lines:
example.com. 192.168.1.1 ~
www.example.com. 192.168.1.1 ~
barebox.example.com. 192.168.1.2 ~
Run sandbox barebox and setup the www.example.com IP-address
for your host 'barebox' network interface, e.g.:
# ifconfig barebox 192.168.1.1
Restart maradns:
$ /etc/init.d/maradns restart
Check name resolution:
barebox@barebox sandbox:/ ifconfig eth 192.168.1.2 255.255.255.0
Assigned ipv4 192.168.1.2 to device eth
barebox@barebox sandbox:/ net.nameserver=192.168.1.1
barebox@barebox sandbox:/ host barebox.example.com
barebox.example.com is at 192.168.1.2
barebox@barebox sandbox:/ host www.example.com
www.example.com is at 192.168.1.1
The same checks for barebox legacy network stack:
barebox@barebox sandbox:/ eth0.ipaddr=192.168.1.2
barebox@barebox sandbox:/ eth0.serverip=192.168.1.1
barebox@barebox sandbox:/ net.domainname=example.com
barebox@barebox sandbox:/ net.nameserver=192.168.1.1
barebox@barebox sandbox:/ host barebox.example.com
warning: No MAC address set. Using random address 9a:a1:86:31:05:1e
barebox.example.com is at 192.168.1.2
barebox@barebox sandbox:/ host www.example.com
www.example.com is at 192.168.1.1
Testing dhcp (ad memorandum)
----------------------------
Configure your host dhcp server, e.g. add this
to your /etc/dhcp/dhcpd.conf:
subnet 192.168.1.0 netmask 255.255.255.0 {
range dynamic-bootp 192.168.1.26 192.168.1.29;
option routers 192.168.1.1;
option broadcast-address 192.168.1.255;
default-lease-time 600;
max-lease-time 7200;
}
While sandbox barebox is running setup a IP-address
for your host 'barebox' network interface and restart
your host dhcp server, e.g.:
# ifconfig barebox 192.168.1.1
# /etc/init.d/isc-dhcp-server restart
Next, in your sandbox barebox console run 'dhclient':
barebox:/ dhclient eth
Assigned ipv4 0.0.0.0 to device eth
Assigned ipv4 192.168.1.26 to device eth
DHCP client: renewal time (T1) 300
DHCP client: rebinding time (T2) 525
DHCP client: lease time 496
DHCP client: IP assigned by the server: 192.168.1.26
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/sandbox/configs/sandbox_defconfig | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/sandbox/configs/sandbox_defconfig b/arch/sandbox/configs/sandbox_defconfig
index d82579b..320a22b 100644
--- a/arch/sandbox/configs/sandbox_defconfig
+++ b/arch/sandbox/configs/sandbox_defconfig
@@ -36,10 +36,7 @@ CONFIG_CMD_LET=y
CONFIG_CMD_MSLEEP=y
CONFIG_CMD_READF=y
CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
CONFIG_CMD_HOST=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_EDIT=y
CONFIG_CMD_MENU=y
@@ -61,8 +58,13 @@ CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_SPD_DECODE=y
CONFIG_NET=y
+CONFIG_NET_PICOTCP=y
CONFIG_NET_NFS=y
CONFIG_NET_NETCONSOLE=y
+CONFIG_CMD_PICOTCP_TEST_IPV4=y
+CONFIG_CMD_PICOTCP_IFCONFIG=y
+CONFIG_CMD_PICOTCP_PING=y
+CONFIG_CMD_PICOTCP_ROUTE=y
CONFIG_OFDEVICE=y
CONFIG_OF_BAREBOX_DRIVERS=y
CONFIG_DRIVER_NET_TAP=y
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-07-19 20:11 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-19 20:07 [RFC v2 00/16] barebox picotcp integration (2015.07.19) Antony Pavlov
2015-07-19 20:07 ` [RFC v2 01/16] net_udp_bind(): use uint16_t type for source port Antony Pavlov
2015-07-19 20:07 ` [RFC v2 02/16] fs/tftp.c: drop unused server_port variable Antony Pavlov
2015-07-19 20:07 ` [RFC v2 03/16] fs/nfs.c: use uint16_t for port numbers Antony Pavlov
2015-07-19 20:07 ` [RFC v2 04/16] fs/nfs.c: use SUNRPC_PORT remote port by default Antony Pavlov
2015-07-19 20:07 ` [RFC v2 05/16] net: change UDP handler function API Antony Pavlov
2015-07-19 20:07 ` [RFC v2 06/16] net: change net_udp_send() API Antony Pavlov
2015-07-19 20:07 ` [RFC v2 07/16] net: introduce setudppeerport() Antony Pavlov
2015-07-19 20:07 ` [RFC v2 08/16] net: import picotcp from github Antony Pavlov
2015-07-19 20:07 ` [RFC v2 09/16] picotcp: add barebox target support Antony Pavlov
2015-07-19 20:07 ` [RFC v2 10/16] picotcp: switch to Kbuild Antony Pavlov
2015-07-19 20:07 ` [RFC v2 11/16] net: add initial picotcp support Antony Pavlov
2015-07-19 20:07 ` [RFC v2 12/16] net: picotcp: add test_picotcp command Antony Pavlov
2015-07-19 20:07 ` [RFC v2 13/16] net: picotcp: add ifconfig command Antony Pavlov
2015-07-19 20:07 ` [RFC v2 14/16] net: picotcp: add ping command Antony Pavlov
2015-07-19 20:07 ` [RFC v2 15/16] net: picotcp: add route command Antony Pavlov
2015-07-19 20:07 ` Antony Pavlov [this message]
2015-07-20 7:10 ` [RFC v2 00/16] barebox picotcp integration (2015.07.19) Sascha Hauer
2015-07-20 9:50 ` Antony Pavlov
2015-07-20 10:06 ` Antony Pavlov
2015-07-20 10:45 ` Sascha Hauer
2015-07-20 12:16 ` Antony Pavlov
2015-07-24 4:58 ` Antony Pavlov
2015-07-24 7:19 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437336443-8076-17-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox