mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Peter Mamonov <pmamonov@gmail.com>
To: barebox@lists.infradead.org
Cc: Peter Mamonov <pmamonov@gmail.com>
Subject: [PATCH v7 2/5] usb: ehci-hcd: port periodic transactions implementation from the u-boot
Date: Thu, 24 Sep 2015 19:20:25 +0300	[thread overview]
Message-ID: <1443111628-12758-3-git-send-email-pmamonov@gmail.com> (raw)
In-Reply-To: <1443111628-12758-1-git-send-email-pmamonov@gmail.com>

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/host/ehci-hcd.c | 402 +++++++++++++++++++++++++++++++++++++++++++-
 drivers/usb/host/ehci.h     |  15 +-
 2 files changed, 415 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 551d1a0..72f7414 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -48,6 +48,19 @@ struct ehci_priv {
 	int (*init)(void *drvdata);
 	int (*post_init)(void *drvdata);
 	void *drvdata;
+	int periodic_schedules;
+	struct QH *periodic_queue;
+	uint32_t *periodic_list;
+};
+
+struct int_queue {
+	int elementsize;
+	int queuesize;
+	unsigned long pipe;
+	struct QH *first;
+	struct QH *current;
+	struct QH *last;
+	struct qTD *tds;
 };
 
 #define to_ehci(ptr) container_of(ptr, struct ehci_priv, host)
@@ -768,6 +781,8 @@ static int ehci_init(struct usb_host *host)
 	uint32_t reg;
 	uint32_t cmd;
 	int ret = 0;
+	struct QH *periodic;
+	int i;
 
 	ehci_halt(ehci);
 
@@ -798,6 +813,44 @@ static int ehci_init(struct usb_host *host)
 		ehci_writel(&ehci->hcor->or_asynclistaddr, ba);
 	}
 
+	/*
+	 * Set up periodic list
+	 * Step 1: Parent QH for all periodic transfers.
+	 */
+	ehci->periodic_schedules = 0;
+	periodic = ehci->periodic_queue;
+	memset(periodic, 0, sizeof(*periodic));
+	periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE);
+	periodic->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+	periodic->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+
+	/*
+	 * Step 2: Setup frame-list: Every microframe, USB tries the same list.
+	 *         In particular, device specifications on polling frequency
+	 *         are disregarded. Keyboards seem to send NAK/NYet reliably
+	 *         when polled with an empty buffer.
+	 *
+	 *         Split Transactions will be spread across microframes using
+	 *         S-mask and C-mask.
+	 */
+	if (ehci->periodic_list == NULL)
+		/*
+		 * FIXME: this memory chunk have to be 4k aligned AND
+		 * reside in coherent memory. Current implementation of
+		 * dma_alloc_coherent() allocates PAGE_SIZE aligned memory chunks.
+		 * PAGE_SIZE less then 4k will break this code.
+		 */
+		ehci->periodic_list = dma_alloc_coherent(1024 * 4,
+							 DMA_ADDRESS_BROKEN);
+	for (i = 0; i < 1024; i++) {
+		ehci->periodic_list[i] = cpu_to_hc32((unsigned long)periodic
+						| QH_LINK_TYPE_QH);
+	}
+
+	/* Set periodic list base address */
+	ehci_writel(&ehci->hcor->or_periodiclistbase,
+		(unsigned long)ehci->periodic_list);
+
 	reg = ehci_readl(&ehci->hccr->cr_hcsparams);
 	descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
 
@@ -869,15 +922,360 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 }
 
 static int
+disable_periodic(struct ehci_priv *ehci)
+{
+	uint32_t cmd;
+	struct ehci_hcor *hcor = ehci->hcor;
+	int ret;
+
+	cmd = ehci_readl(&hcor->or_usbcmd);
+	cmd &= ~CMD_PSE;
+	ehci_writel(&hcor->or_usbcmd, cmd);
+
+	ret = handshake((uint32_t *)&hcor->or_usbsts,
+			STS_PSS, 0, 100 * 1000);
+	if (ret < 0) {
+		printf("EHCI failed: timeout when disabling periodic list\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+#define NEXT_QH(qh) (struct QH *)((unsigned long)hc32_to_cpu((qh)->qh_link) & ~0x1f)
+
+static int
+enable_periodic(struct ehci_priv *ehci)
+{
+	uint32_t cmd;
+	struct ehci_hcor *hcor = ehci->hcor;
+	int ret;
+
+	cmd = ehci_readl(&hcor->or_usbcmd);
+	cmd |= CMD_PSE;
+	ehci_writel(&hcor->or_usbcmd, cmd);
+	ret = handshake((uint32_t *)&hcor->or_usbsts,
+			STS_PSS, STS_PSS, 100 * 1000);
+	if (ret < 0) {
+		printf("EHCI failed: timeout when enabling periodic list\n");
+		return -ETIMEDOUT;
+	}
+	mdelay_non_interruptible(1);
+	return 0;
+}
+
+static inline u8 ehci_encode_speed(enum usb_device_speed speed)
+{
+	#define QH_HIGH_SPEED	2
+	#define QH_FULL_SPEED	0
+	#define QH_LOW_SPEED	1
+	if (speed == USB_SPEED_HIGH)
+		return QH_HIGH_SPEED;
+	if (speed == USB_SPEED_LOW)
+		return QH_LOW_SPEED;
+	return QH_FULL_SPEED;
+}
+
+static void ehci_update_endpt2_dev_n_port(struct usb_device *udev,
+					  struct QH *qh)
+{
+	struct usb_device *ttdev;
+	int parent_devnum;
+
+	if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL)
+		return;
+
+	/*
+	 * For full / low speed devices we need to get the devnum and portnr of
+	 * the tt, so of the first upstream usb-2 hub, there may be usb-1 hubs
+	 * in the tree before that one!
+	 */
+
+	ttdev = udev;
+	while (ttdev->parent && ttdev->parent->speed != USB_SPEED_HIGH)
+		ttdev = ttdev->parent;
+	if (!ttdev->parent)
+		return;
+	parent_devnum = ttdev->parent->devnum;
+
+	qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(ttdev->portnr) |
+				     QH_ENDPT2_HUBADDR(parent_devnum));
+}
+
+static struct int_queue *ehci_create_int_queue(struct usb_device *dev,
+			unsigned long pipe, int queuesize, int elementsize,
+			void *buffer, int interval)
+{
+	struct usb_host *host = dev->host;
+	struct ehci_priv *ehci = to_ehci(host);
+	struct int_queue *result = NULL;
+	uint32_t i, toggle;
+	struct QH *list = ehci->periodic_queue;
+
+	/*
+	 * Interrupt transfers requiring several transactions are not supported
+	 * because bInterval is ignored.
+	 *
+	 * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2
+	 * <= PKT_ALIGN if several qTDs are required, while the USB
+	 * specification does not constrain this for interrupt transfers. That
+	 * means that ehci_submit_async() would support interrupt transfers
+	 * requiring several transactions only as long as the transfer size does
+	 * not require more than a single qTD.
+	 */
+	if (elementsize > usb_maxpacket(dev, pipe)) {
+		dev_err(&dev->dev,
+			"%s: xfers requiring several transactions are not supported.\n",
+			__func__);
+		return NULL;
+	}
+
+	debug("Enter create_int_queue\n");
+	if (usb_pipetype(pipe) != PIPE_INTERRUPT) {
+		dev_dbg(&dev->dev,
+			"non-interrupt pipe (type=%lu)",
+			usb_pipetype(pipe));
+		return NULL;
+	}
+
+	/* limit to 4 full pages worth of data -
+	 * we can safely fit them in a single TD,
+	 * no matter the alignment
+	 */
+	if (elementsize >= 16384) {
+		dev_dbg(&dev->dev,
+			"too large elements for interrupt transfers\n");
+		return NULL;
+	}
+
+	result = xzalloc(sizeof(*result));
+	result->elementsize = elementsize;
+	result->queuesize = queuesize;
+	result->pipe = pipe;
+	result->first = dma_alloc_coherent(sizeof(struct QH) * queuesize,
+					   DMA_ADDRESS_BROKEN);
+	result->current = result->first;
+	result->last = result->first + queuesize - 1;
+	result->tds = dma_alloc_coherent(sizeof(struct qTD) * queuesize,
+					 DMA_ADDRESS_BROKEN);
+	memset(result->first, 0, sizeof(struct QH) * queuesize);
+	memset(result->tds, 0, sizeof(struct qTD) * queuesize);
+
+	toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+
+	for (i = 0; i < queuesize; i++) {
+		struct QH *qh = result->first + i;
+		struct qTD *td = result->tds + i;
+		void **buf = &qh->buffer;
+
+		qh->qh_link = cpu_to_hc32((unsigned long)(qh+1) | QH_LINK_TYPE_QH);
+		if (i == queuesize - 1)
+			qh->qh_link = cpu_to_hc32(QH_LINK_TERMINATE);
+
+		qh->qt_next = cpu_to_hc32((unsigned long)td);
+		qh->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+		qh->qh_endpt1 =
+			cpu_to_hc32((0 << 28) | /* No NAK reload (ehci 4.9) */
+			(usb_maxpacket(dev, pipe) << 16) | /* MPS */
+			(1 << 14) |
+			QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) |
+			(usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */
+			(usb_pipedevice(pipe) << 0));
+		qh->qh_endpt2 = cpu_to_hc32((1 << 30) | /* 1 Tx per mframe */
+			(1 << 0)); /* S-mask: microframe 0 */
+		if (dev->speed == USB_SPEED_LOW ||
+				dev->speed == USB_SPEED_FULL) {
+			/* C-mask: microframes 2-4 */
+			qh->qh_endpt2 |= cpu_to_hc32((0x1c << 8));
+		}
+		ehci_update_endpt2_dev_n_port(dev, qh);
+
+		td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+		td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+		dev_dbg(&dev->dev,
+			"communication direction is '%s'\n",
+			usb_pipein(pipe) ? "in" : "out");
+		td->qt_token = cpu_to_hc32(
+			QT_TOKEN_DT(toggle) |
+			(elementsize << 16) |
+			((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */
+			0x80); /* active */
+		td->qt_buffer[0] =
+		    cpu_to_hc32((unsigned long)buffer + i * elementsize);
+		td->qt_buffer[1] =
+		    cpu_to_hc32((td->qt_buffer[0] + 0x1000) & ~0xfff);
+		td->qt_buffer[2] =
+		    cpu_to_hc32((td->qt_buffer[0] + 0x2000) & ~0xfff);
+		td->qt_buffer[3] =
+		    cpu_to_hc32((td->qt_buffer[0] + 0x3000) & ~0xfff);
+		td->qt_buffer[4] =
+		    cpu_to_hc32((td->qt_buffer[0] + 0x4000) & ~0xfff);
+
+		*buf = buffer + i * elementsize;
+		toggle ^= 1;
+	}
+
+	if (ehci->periodic_schedules > 0) {
+		if (disable_periodic(ehci) < 0) {
+			dev_err(&dev->dev,
+				"FATAL: periodic should never fail, but did");
+			goto fail3;
+		}
+	}
+
+	/* hook up to periodic list */
+	result->last->qh_link = list->qh_link;
+	list->qh_link = cpu_to_hc32((unsigned long)result->first | QH_LINK_TYPE_QH);
+
+	if (enable_periodic(ehci) < 0) {
+		dev_err(&dev->dev,
+			"FATAL: periodic should never fail, but did");
+		goto fail3;
+	}
+	ehci->periodic_schedules++;
+
+	dev_dbg(&dev->dev, "Exit create_int_queue\n");
+	return result;
+fail3:
+	dma_free_coherent(result->tds, 0, sizeof(struct qTD) * queuesize);
+	dma_free_coherent(result->first, 0, sizeof(struct QH) * queuesize);
+	free(result);
+	return NULL;
+}
+
+static void *ehci_poll_int_queue(struct usb_device *dev,
+				  struct int_queue *queue)
+{
+	struct QH *cur = queue->current;
+	struct qTD *cur_td;
+	uint32_t token, toggle;
+	unsigned long pipe = queue->pipe;
+
+	/* depleted queue */
+	if (cur == NULL) {
+		dev_dbg(&dev->dev, "Exit poll_int_queue with completed queue\n");
+		return NULL;
+	}
+	/* still active */
+	cur_td = &queue->tds[queue->current - queue->first];
+	token = hc32_to_cpu(cur_td->qt_token);
+	if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) {
+		dev_dbg(&dev->dev,
+			"Exit poll_int_queue with no completed intr transfer. token is %x\n",
+			token);
+		return NULL;
+	}
+
+	toggle = QT_TOKEN_GET_DT(token);
+	usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle);
+
+	if (!(cur->qh_link & QH_LINK_TERMINATE))
+		queue->current++;
+	else
+		queue->current = NULL;
+
+	dev_dbg(&dev->dev,
+		"Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n",
+		token, cur, queue->first);
+	return cur->buffer;
+}
+
+static int ehci_destroy_int_queue(struct usb_device *dev,
+				   struct int_queue *queue)
+{
+	int result = -EINVAL;
+	struct usb_host *host = dev->host;
+	struct ehci_priv *ehci = to_ehci(host);
+	struct QH *cur = ehci->periodic_queue;
+	uint64_t start;
+
+	if (disable_periodic(ehci) < 0) {
+		dev_err(&dev->dev,
+			"FATAL: periodic should never fail, but did\n");
+		goto out;
+	}
+	ehci->periodic_schedules--;
+
+	start = get_time_ns();
+	while (!(cur->qh_link & cpu_to_hc32(QH_LINK_TERMINATE))) {
+		dev_dbg(&dev->dev,
+			"considering %p, with qh_link %x\n",
+			cur, cur->qh_link);
+		if (NEXT_QH(cur) == queue->first) {
+			dev_dbg(&dev->dev,
+				"found candidate. removing from chain\n");
+			cur->qh_link = queue->last->qh_link;
+			result = 0;
+			break;
+		}
+		cur = NEXT_QH(cur);
+		if (is_timeout_non_interruptible(start, 500 * MSECOND)) {
+			dev_err(&dev->dev,
+				"Timeout destroying interrupt endpoint queue\n");
+			result = -ETIMEDOUT;
+			goto out;
+		}
+	}
+
+	if (ehci->periodic_schedules > 0) {
+		result = enable_periodic(ehci);
+		if (result < 0)
+			dev_err(&dev->dev,
+				"FATAL: periodic should never fail, but did");
+	}
+
+out:
+	dma_free_coherent(queue->tds, 0, sizeof(struct qTD) * queue->queuesize);
+	dma_free_coherent(queue->first, 0, sizeof(struct QH) * queue->queuesize);
+	free(queue);
+	return result;
+}
+
+static int
 submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	       int length, int interval)
 {
 	struct usb_host *host = dev->host;
 	struct ehci_priv *ehci = to_ehci(host);
+	struct int_queue *queue;
+	uint64_t start;
+	void *backbuffer;
+	int result = 0, ret;
 
 	dev_dbg(ehci->dev, "dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d",
 	      dev, pipe, buffer, length, interval);
-	return -1;
+
+	dma_sync_single_for_device((unsigned long)buffer, length,
+				   DMA_BIDIRECTIONAL);
+
+	queue = ehci_create_int_queue(dev, pipe, 1, length, buffer, interval);
+	if (!queue)
+		return -EINVAL;
+
+	start = get_time_ns();
+	while ((backbuffer = ehci_poll_int_queue(dev, queue)) == NULL)
+		if (is_timeout_non_interruptible(start,
+						 USB_CNTL_TIMEOUT * MSECOND)) {
+			dev_err(&dev->dev,
+				"Timeout poll on interrupt endpoint\n");
+			result = -ETIMEDOUT;
+			break;
+		}
+
+	if (backbuffer != buffer) {
+		dev_err(&dev->dev,
+			"got wrong buffer back (%p instead of %p)\n",
+			backbuffer, buffer);
+		if (!result)
+			result = -EINVAL;
+	}
+
+	dma_sync_single_for_cpu((unsigned long)buffer, length,
+				DMA_BIDIRECTIONAL);
+
+	ret = ehci_destroy_int_queue(dev, queue);
+	if (!result)
+		result = ret;
+	return result;
 }
 
 static int ehci_detect(struct device_d *dev)
@@ -912,6 +1310,8 @@ int ehci_register(struct device_d *dev, struct ehci_data *data)
 
 	ehci->qh_list = dma_alloc_coherent(sizeof(struct QH) * NUM_TD,
 					   DMA_ADDRESS_BROKEN);
+	ehci->periodic_queue = dma_alloc_coherent(sizeof(struct QH),
+						  DMA_ADDRESS_BROKEN);
 	ehci->td = dma_alloc_coherent(sizeof(struct qTD) * NUM_TD,
 				      DMA_ADDRESS_BROKEN);
 
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index d71d056..39de763 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -20,6 +20,15 @@
 
 #include <io.h>
 
+#define QH_ENDPT1_EPS(x)	(((x) & 0x3) << 12)	/* Endpoint Speed */
+#define QH_ENDPT2_PORTNUM(x)	(((x) & 0x7f) << 23)	/* Port Number */
+#define QH_ENDPT2_HUBADDR(x)	(((x) & 0x7f) << 16)	/* Hub Address */
+
+#define QT_TOKEN_DT(x)		(((x) & 0x1) << 31)	/* Data Toggle */
+#define QT_TOKEN_GET_STATUS(x)	(((x) >> 0) & 0xff)
+#define QT_TOKEN_STATUS_ACTIVE	0x80
+#define QT_TOKEN_GET_DT(x)	(((x) >> 31) & 0x1)
+
 #if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS)
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	16
 #endif
@@ -51,6 +60,7 @@ struct ehci_hcor {
 #define CMD_RUN		(1 << 0)		/* start/stop HC */
 	uint32_t or_usbsts;
 #define	STD_ASS		(1 << 15)
+#define STS_PSS         (1 << 14)
 #define STS_HALT	(1 << 12)
 	uint32_t or_usbintr;
 	uint32_t or_frindex;
@@ -148,7 +158,10 @@ struct QH {
 	 * Add dummy fill value to make the size of this struct
 	 * aligned to 32 bytes
 	 */
-	uint8_t fill[16];
+	union {
+		uint8_t fill[16];
+		void* buffer;
+	};
 };
 
 #endif /* USB_EHCI_H */
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2015-09-24 16:18 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-24 16:20 [PATCH v7 0/5] input: add usb keyboard driver Peter Mamonov
2015-09-24 16:20 ` [PATCH v7 1/5] common: clock: introduce mdelay_non_interruptible() Peter Mamonov
2015-09-24 16:20 ` Peter Mamonov [this message]
2015-09-24 16:20 ` [PATCH v7 3/5] usb: ehci-hcd: detect re-entrance Peter Mamonov
2015-09-24 16:20 ` [PATCH v7 4/5] usb: ehci-hcd: use mdelay_non_interruptible() Peter Mamonov
2015-09-24 16:20 ` [PATCH v7 5/5] input: port usb keyboard driver from the u-boot Peter Mamonov
2015-09-29  6:43 ` [PATCH v7 0/5] input: add usb keyboard driver Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1443111628-12758-3-git-send-email-pmamonov@gmail.com \
    --to=pmamonov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox