From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 02/23] imx: hab: rename driver dir to hab/
Date: Fri, 29 Jan 2016 11:43:42 +0100 [thread overview]
Message-ID: <1454064243-26558-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1454064243-26558-1-git-send-email-s.hauer@pengutronix.de>
There's not only HABv4 but also HABv3. No need to put the corresponding
code in separate directories, so rename the habv4 directory to hab.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/Kconfig | 5 +
drivers/Makefile | 2 +-
drivers/hab/Makefile | 1 +
drivers/hab/habv4.c | 237 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/habv4/Makefile | 1 -
drivers/habv4/habv4.c | 237 ----------------------------------------------
include/hab.h | 30 ++++++
include/habv4.h | 30 ------
8 files changed, 274 insertions(+), 269 deletions(-)
create mode 100644 drivers/hab/Makefile
create mode 100644 drivers/hab/habv4.c
delete mode 100644 drivers/habv4/Makefile
delete mode 100644 drivers/habv4/habv4.c
create mode 100644 include/hab.h
delete mode 100644 include/habv4.h
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c78d3ed..9e7be2e 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -688,8 +688,12 @@ config IMX_OCOTP_WRITE
mw -l -d /dev/imx-ocotp 0x8C 0x00001234
mw -l -d /dev/imx-ocotp 0x88 0x56789ABC
+config HAB
+ bool
+
config HABV4
tristate "HABv4 support"
+ select HAB
depends on ARCH_IMX6
help
High Assurance Boot, as found on i.MX28/i.MX6.
@@ -730,6 +734,7 @@ endif
config HABV3
tristate "HABv3 support"
+ select HAB
depends on ARCH_IMX25
help
High Assurance Boot, as found on i.MX25.
diff --git a/drivers/Makefile b/drivers/Makefile
index 3afbb61..8a8c8c4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -30,4 +30,4 @@ obj-$(CONFIG_PCI) += pci/
obj-y += rtc/
obj-$(CONFIG_FIRMWARE) += firmware/
obj-$(CONFIG_GENERIC_PHY) += phy/
-obj-$(CONFIG_HABV4) += habv4/
+obj-$(CONFIG_HAB) += hab/
diff --git a/drivers/hab/Makefile b/drivers/hab/Makefile
new file mode 100644
index 0000000..5c3b00c
--- /dev/null
+++ b/drivers/hab/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_HABV4) += habv4.o
diff --git a/drivers/hab/habv4.c b/drivers/hab/habv4.c
new file mode 100644
index 0000000..8521b88
--- /dev/null
+++ b/drivers/hab/habv4.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2014, 2015 Marc Kleine-Budde <mkl@pengutronix.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "HABv4: " fmt
+
+#include <common.h>
+#include <hab.h>
+#include <types.h>
+
+#include <mach/generic.h>
+
+#define HABV4_RVT_IMX28 0xffff8af8
+#define HABV4_RVT_IMX6 0x00000094
+
+enum hab_tag {
+ HAB_TAG_IVT = 0xd1, /* Image Vector Table */
+ HAB_TAG_DCD = 0xd2, /* Device Configuration Data */
+ HAB_TAG_CSF = 0xd4, /* Command Sequence File */
+ HAB_TAG_CRT = 0xd7, /* Certificate */
+ HAB_TAG_SIG = 0xd8, /* Signature */
+ HAB_TAG_EVT = 0xdb, /* Event */
+ HAB_TAG_RVT = 0xdd, /* ROM Vector Table */
+ HAB_TAG_WRP = 0x81, /* Wrapped Key */
+ HAB_TAG_MAC = 0xac, /* Message Authentication Code */
+};
+
+/* Status definitions */
+enum hab_status {
+ HAB_STATUS_ANY = 0x00, /* Match any status in report_event */
+ HAB_STATUS_FAILURE = 0x33, /* Operation failed */
+ HAB_STATUS_WARNING = 0x69, /* Operation completed with warning */
+ HAB_STATUS_SUCCESS = 0xf0, /* Operation completed successfully */
+};
+
+/* Security Configuration definitions */
+enum hab_config {
+ HAB_CONFIG_FAB = 0x00, /* Un-programmed IC */
+ HAB_CONFIG_RETURN = 0x33, /* Field Return IC */
+ HAB_CONFIG_OPEN = 0xf0, /* Non-secure IC */
+ HAB_CONFIG_CLOSED = 0xcc, /* Secure IC */
+};
+
+/* State definitions */
+enum hab_state {
+ HAB_STATE_INITIAL = 0x33, /* Initialising state (transitory) */
+ HAB_STATE_CHECK = 0x55, /* Check state (non-secure) */
+ HAB_STATE_NONSECURE = 0x66, /* Non-secure state */
+ HAB_STATE_TRUSTED = 0x99, /* Trusted state */
+ HAB_STATE_SECURE = 0xaa, /* Secure state */
+ HAB_STATE_FAIL_SOFT = 0xcc, /* Soft fail state */
+ HAB_STATE_FAIL_HARD = 0xff, /* Hard fail state (terminal) */
+ HAB_STATE_NONE = 0xf0, /* No security state machine */
+};
+
+enum hab_target {
+ HAB_TARGET_MEMORY = 0x0f, /* Check memory white list */
+ HAB_TARGET_PERIPHERAL = 0xf0, /* Check peripheral white list*/
+ HAB_TARGET_ANY = 0x55, /* Check memory & peripheral white list */
+};
+
+enum hab_assertion {
+ HAB_ASSERTION_BLOCK = 0x0, /* Check if memory is authenticated after CSF */
+};
+
+struct hab_header {
+ uint8_t tag;
+ uint16_t len; /* len including the header */
+ uint8_t par;
+} __packed;
+
+typedef enum hab_status hab_loader_callback_fn(void **start, uint32_t *bytes, const void *boot_data);
+
+struct habv4_rvt {
+ struct hab_header header;
+ enum hab_status (*entry)(void);
+ enum hab_status (*exit)(void);
+ enum hab_status (*check_target)(enum hab_target target, const void *start, uint32_t bytes);
+ void *(*authenticate_image)(uint8_t cid, uint32_t ivt_offset, void **start, uint32_t *bytes, hab_loader_callback_fn *loader);
+ enum hab_status (*run_dcd)(const void *dcd);
+ enum hab_status (*run_csf)(const void *csf, uint8_t cid);
+ enum hab_status (*assert)(enum hab_assertion assertion, const void *data, uint32_t count);
+ enum hab_status (*report_event)(enum hab_status status, uint32_t index, void *event, uint32_t *bytes);
+ enum hab_status (*report_status)(enum hab_config *config, enum hab_state *state);
+ void (*failsafe)(void);
+} __packed;
+
+static const struct habv4_rvt *__rvt;
+
+static inline const struct habv4_rvt *habv4_get_rvt(void)
+{
+ if (__rvt)
+ return __rvt;
+
+ if (cpu_is_mx28())
+ __rvt = (void *)HABV4_RVT_IMX28;
+ else if (cpu_is_mx6())
+ __rvt = (void *)HABV4_RVT_IMX6;
+
+ if (__rvt->header.tag != HAB_TAG_RVT) {
+ pr_err("ERROR - RVT not found!\n");
+ return NULL;
+ }
+
+ pr_info("Found RVT v%d.%d\n", __rvt->header.par >> 4,
+ __rvt->header.par & 0xf);
+
+ return __rvt;
+}
+
+static const char *habv4_get_status_str(enum hab_status status)
+{
+ switch (status) {
+ case HAB_STATUS_ANY:
+ return "Match any status in report_event"; break;
+ case HAB_STATUS_FAILURE:
+ return "Operation failed"; break;
+ case HAB_STATUS_WARNING:
+ return "Operation completed with warning"; break;
+ case HAB_STATUS_SUCCESS:
+ return "Operation completed successfully"; break;
+ }
+
+ return "<unknown>";
+}
+
+static const char *habv4_get_config_str(enum hab_config config)
+{
+ switch (config) {
+ case HAB_CONFIG_FAB:
+ return "Un-programmed IC"; break;
+ case HAB_CONFIG_RETURN:
+ return "Field Return IC"; break;
+ case HAB_CONFIG_OPEN:
+ return "Non-secure IC"; break;
+ case HAB_CONFIG_CLOSED:
+ return "Secure IC"; break;
+ }
+
+ return "<unknown>";
+}
+
+static const char *habv4_get_state_str(enum hab_state state)
+{
+ switch (state) {
+ case HAB_STATE_INITIAL:
+ return "Initialising state (transitory)"; break;
+ case HAB_STATE_CHECK:
+ return "Check state (non-secure)"; break;
+ case HAB_STATE_NONSECURE:
+ return "Non-secure state"; break;
+ case HAB_STATE_TRUSTED:
+ return "Trusted state"; break;
+ case HAB_STATE_SECURE:
+ return "Secure state"; break;
+ case HAB_STATE_FAIL_SOFT:
+ return "Soft fail state"; break;
+ case HAB_STATE_FAIL_HARD:
+ return "Hard fail state (terminal)"; break;
+ case HAB_STATE_NONE:
+ return "No security state machine"; break;
+ }
+
+ return "<unknown>";
+}
+
+static void habv4_display_event(uint8_t *data, uint32_t len)
+{
+ unsigned int i;
+
+ if (data && len) {
+ for (i = 0; i < len; i++) {
+ if (i == 0)
+ printf(" %02x", data[i]);
+ else if ((i % 8) == 0)
+ printf("\n %02x", data[i]);
+ else if ((i % 4) == 0)
+ printf(" %02x", data[i]);
+ else
+ printf(" %02x", data[i]);
+ }
+ }
+ printf("\n\n");
+}
+
+int habv4_get_status(void)
+{
+ const struct habv4_rvt *rvt = habv4_get_rvt();
+ uint8_t data[256];
+ uint32_t len = sizeof(data);
+ uint32_t index = 0;
+ enum hab_status status;
+ enum hab_config config = 0x0;
+ enum hab_state state = 0x0;
+
+ if (!rvt)
+ return -ENODEV;
+
+ status = rvt->report_status(&config, &state);
+ pr_info("Status: %s (0x%02x)\n", habv4_get_status_str(status), status);
+ pr_info("Config: %s (0x%02x)\n", habv4_get_config_str(config), config);
+ pr_info("State: %s (0x%02x)\n", habv4_get_state_str(state), state);
+
+ if (status == HAB_STATUS_SUCCESS) {
+ pr_info("No HAB Failure Events Found!\n\n");
+ return 0;
+ }
+
+ while (rvt->report_event(HAB_STATUS_FAILURE, index, data, &len) == HAB_STATUS_SUCCESS) {
+ printf("-------- HAB Event %d --------\n"
+ "event data:\n", index);
+
+ habv4_display_event(data, len);
+ len = sizeof(data);
+ index++;
+ }
+
+ /* Check reason for stopping */
+ if (rvt->report_event(HAB_STATUS_ANY, index, NULL, &len) == HAB_STATUS_SUCCESS)
+ pr_err("ERROR: Recompile with larger event data buffer (at least %d bytes)\n\n", len);
+
+ return -EPERM;
+}
diff --git a/drivers/habv4/Makefile b/drivers/habv4/Makefile
deleted file mode 100644
index 40b3253..0000000
--- a/drivers/habv4/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += habv4.o
diff --git a/drivers/habv4/habv4.c b/drivers/habv4/habv4.c
deleted file mode 100644
index 5ace0de..0000000
--- a/drivers/habv4/habv4.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Copyright (C) 2014, 2015 Marc Kleine-Budde <mkl@pengutronix.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt) "HABv4: " fmt
-
-#include <common.h>
-#include <habv4.h>
-#include <types.h>
-
-#include <mach/generic.h>
-
-#define HABV4_RVT_IMX28 0xffff8af8
-#define HABV4_RVT_IMX6 0x00000094
-
-enum hab_tag {
- HAB_TAG_IVT = 0xd1, /* Image Vector Table */
- HAB_TAG_DCD = 0xd2, /* Device Configuration Data */
- HAB_TAG_CSF = 0xd4, /* Command Sequence File */
- HAB_TAG_CRT = 0xd7, /* Certificate */
- HAB_TAG_SIG = 0xd8, /* Signature */
- HAB_TAG_EVT = 0xdb, /* Event */
- HAB_TAG_RVT = 0xdd, /* ROM Vector Table */
- HAB_TAG_WRP = 0x81, /* Wrapped Key */
- HAB_TAG_MAC = 0xac, /* Message Authentication Code */
-};
-
-/* Status definitions */
-enum hab_status {
- HAB_STATUS_ANY = 0x00, /* Match any status in report_event */
- HAB_STATUS_FAILURE = 0x33, /* Operation failed */
- HAB_STATUS_WARNING = 0x69, /* Operation completed with warning */
- HAB_STATUS_SUCCESS = 0xf0, /* Operation completed successfully */
-};
-
-/* Security Configuration definitions */
-enum hab_config {
- HAB_CONFIG_FAB = 0x00, /* Un-programmed IC */
- HAB_CONFIG_RETURN = 0x33, /* Field Return IC */
- HAB_CONFIG_OPEN = 0xf0, /* Non-secure IC */
- HAB_CONFIG_CLOSED = 0xcc, /* Secure IC */
-};
-
-/* State definitions */
-enum hab_state {
- HAB_STATE_INITIAL = 0x33, /* Initialising state (transitory) */
- HAB_STATE_CHECK = 0x55, /* Check state (non-secure) */
- HAB_STATE_NONSECURE = 0x66, /* Non-secure state */
- HAB_STATE_TRUSTED = 0x99, /* Trusted state */
- HAB_STATE_SECURE = 0xaa, /* Secure state */
- HAB_STATE_FAIL_SOFT = 0xcc, /* Soft fail state */
- HAB_STATE_FAIL_HARD = 0xff, /* Hard fail state (terminal) */
- HAB_STATE_NONE = 0xf0, /* No security state machine */
-};
-
-enum hab_target {
- HAB_TARGET_MEMORY = 0x0f, /* Check memory white list */
- HAB_TARGET_PERIPHERAL = 0xf0, /* Check peripheral white list*/
- HAB_TARGET_ANY = 0x55, /* Check memory & peripheral white list */
-};
-
-enum hab_assertion {
- HAB_ASSERTION_BLOCK = 0x0, /* Check if memory is authenticated after CSF */
-};
-
-struct hab_header {
- uint8_t tag;
- uint16_t len; /* len including the header */
- uint8_t par;
-} __packed;
-
-typedef enum hab_status hab_loader_callback_fn(void **start, uint32_t *bytes, const void *boot_data);
-
-struct habv4_rvt {
- struct hab_header header;
- enum hab_status (*entry)(void);
- enum hab_status (*exit)(void);
- enum hab_status (*check_target)(enum hab_target target, const void *start, uint32_t bytes);
- void *(*authenticate_image)(uint8_t cid, uint32_t ivt_offset, void **start, uint32_t *bytes, hab_loader_callback_fn *loader);
- enum hab_status (*run_dcd)(const void *dcd);
- enum hab_status (*run_csf)(const void *csf, uint8_t cid);
- enum hab_status (*assert)(enum hab_assertion assertion, const void *data, uint32_t count);
- enum hab_status (*report_event)(enum hab_status status, uint32_t index, void *event, uint32_t *bytes);
- enum hab_status (*report_status)(enum hab_config *config, enum hab_state *state);
- void (*failsafe)(void);
-} __packed;
-
-static const struct habv4_rvt *__rvt;
-
-static inline const struct habv4_rvt *habv4_get_rvt(void)
-{
- if (__rvt)
- return __rvt;
-
- if (cpu_is_mx28())
- __rvt = (void *)HABV4_RVT_IMX28;
- else if (cpu_is_mx6())
- __rvt = (void *)HABV4_RVT_IMX6;
-
- if (__rvt->header.tag != HAB_TAG_RVT) {
- pr_err("ERROR - RVT not found!\n");
- return NULL;
- }
-
- pr_info("Found RVT v%d.%d\n", __rvt->header.par >> 4,
- __rvt->header.par & 0xf);
-
- return __rvt;
-}
-
-static const char *habv4_get_status_str(enum hab_status status)
-{
- switch (status) {
- case HAB_STATUS_ANY:
- return "Match any status in report_event"; break;
- case HAB_STATUS_FAILURE:
- return "Operation failed"; break;
- case HAB_STATUS_WARNING:
- return "Operation completed with warning"; break;
- case HAB_STATUS_SUCCESS:
- return "Operation completed successfully"; break;
- }
-
- return "<unknown>";
-}
-
-static const char *habv4_get_config_str(enum hab_config config)
-{
- switch (config) {
- case HAB_CONFIG_FAB:
- return "Un-programmed IC"; break;
- case HAB_CONFIG_RETURN:
- return "Field Return IC"; break;
- case HAB_CONFIG_OPEN:
- return "Non-secure IC"; break;
- case HAB_CONFIG_CLOSED:
- return "Secure IC"; break;
- }
-
- return "<unknown>";
-}
-
-static const char *habv4_get_state_str(enum hab_state state)
-{
- switch (state) {
- case HAB_STATE_INITIAL:
- return "Initialising state (transitory)"; break;
- case HAB_STATE_CHECK:
- return "Check state (non-secure)"; break;
- case HAB_STATE_NONSECURE:
- return "Non-secure state"; break;
- case HAB_STATE_TRUSTED:
- return "Trusted state"; break;
- case HAB_STATE_SECURE:
- return "Secure state"; break;
- case HAB_STATE_FAIL_SOFT:
- return "Soft fail state"; break;
- case HAB_STATE_FAIL_HARD:
- return "Hard fail state (terminal)"; break;
- case HAB_STATE_NONE:
- return "No security state machine"; break;
- }
-
- return "<unknown>";
-}
-
-static void habv4_display_event(uint8_t *data, uint32_t len)
-{
- unsigned int i;
-
- if (data && len) {
- for (i = 0; i < len; i++) {
- if (i == 0)
- printf(" %02x", data[i]);
- else if ((i % 8) == 0)
- printf("\n %02x", data[i]);
- else if ((i % 4) == 0)
- printf(" %02x", data[i]);
- else
- printf(" %02x", data[i]);
- }
- }
- printf("\n\n");
-}
-
-int habv4_get_status(void)
-{
- const struct habv4_rvt *rvt = habv4_get_rvt();
- uint8_t data[256];
- uint32_t len = sizeof(data);
- uint32_t index = 0;
- enum hab_status status;
- enum hab_config config = 0x0;
- enum hab_state state = 0x0;
-
- if (!rvt)
- return -ENODEV;
-
- status = rvt->report_status(&config, &state);
- pr_info("Status: %s (0x%02x)\n", habv4_get_status_str(status), status);
- pr_info("Config: %s (0x%02x)\n", habv4_get_config_str(config), config);
- pr_info("State: %s (0x%02x)\n", habv4_get_state_str(state), state);
-
- if (status == HAB_STATUS_SUCCESS) {
- pr_info("No HAB Failure Events Found!\n\n");
- return 0;
- }
-
- while (rvt->report_event(HAB_STATUS_FAILURE, index, data, &len) == HAB_STATUS_SUCCESS) {
- printf("-------- HAB Event %d --------\n"
- "event data:\n", index);
-
- habv4_display_event(data, len);
- len = sizeof(data);
- index++;
- }
-
- /* Check reason for stopping */
- if (rvt->report_event(HAB_STATUS_ANY, index, NULL, &len) == HAB_STATUS_SUCCESS)
- pr_err("ERROR: Recompile with larger event data buffer (at least %d bytes)\n\n", len);
-
- return -EPERM;
-}
diff --git a/include/hab.h b/include/hab.h
new file mode 100644
index 0000000..f9bf74f
--- /dev/null
+++ b/include/hab.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014, 2015 Marc Kleine-Budde <mkl@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __HABV4_H
+#define __HABV4_H
+
+#ifdef CONFIG_HABV4
+int habv4_get_status(void);
+#else
+static inline int habv4_get_status(void)
+{
+ return -EPERM;
+}
+#endif
+
+#endif /* __HABV4_H */
diff --git a/include/habv4.h b/include/habv4.h
deleted file mode 100644
index f9bf74f..0000000
--- a/include/habv4.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2014, 2015 Marc Kleine-Budde <mkl@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __HABV4_H
-#define __HABV4_H
-
-#ifdef CONFIG_HABV4
-int habv4_get_status(void);
-#else
-static inline int habv4_get_status(void)
-{
- return -EPERM;
-}
-#endif
-
-#endif /* __HABV4_H */
--
2.7.0.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-01-29 10:44 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-29 10:43 i.MX HABv4 rework and HABv3 support Sascha Hauer
2016-01-29 10:43 ` [PATCH 01/23] ARM: i.MX: Add HABv3 Kconfig variables Sascha Hauer
2016-01-29 10:43 ` Sascha Hauer [this message]
2016-01-29 10:43 ` [PATCH 03/23] hab: Add HABv3 status report function Sascha Hauer
2016-01-29 10:43 ` [PATCH 04/23] scripts: imx-usb-loader: Make readonly arguments const Sascha Hauer
2016-01-29 10:43 ` [PATCH 05/23] scripts: imx-usb-loader: Move definitions up Sascha Hauer
2016-01-29 10:43 ` [PATCH 06/23] scripts: imx-image: Allow dcd offset 0x0 Sascha Hauer
2016-01-29 10:43 ` [PATCH 07/23] scripts: imx-usb-loader: fully read images into memory Sascha Hauer
2016-01-29 10:43 ` [PATCH 08/23] scripts: imx-usb-loader: Move load_file up Sascha Hauer
2016-01-29 10:43 ` [PATCH 09/23] scripts: imx: Consolidate flash headers in imx tools Sascha Hauer
2016-01-29 10:43 ` [PATCH 10/23] scripts: imx-image: Add context struct to config parsers Sascha Hauer
2016-01-29 10:43 ` [PATCH 11/23] scripts: imx-image: move write_mem to context data Sascha Hauer
2016-01-29 10:43 ` [PATCH 12/23] scripts: imx-image: move check " Sascha Hauer
2016-01-29 10:43 ` [PATCH 13/23] scripts: imx: move macro definitions to common header file Sascha Hauer
2016-01-29 18:04 ` Sam Ravnborg
2016-02-01 9:18 ` Sascha Hauer
2016-02-01 10:06 ` Sam Ravnborg
2016-01-29 10:43 ` [PATCH 14/23] scripts: imx: move config file parser to separate file Sascha Hauer
2016-01-29 10:43 ` [PATCH 15/23] scripts: imx: make libusb variables global Sascha Hauer
2016-01-29 10:43 ` [PATCH 16/23] scripts: imx-usb-loader: Add -s and -i options Sascha Hauer
2016-01-29 10:43 ` [PATCH 17/23] scripts: imx: Drop double check Sascha Hauer
2016-01-29 10:43 ` [PATCH 18/23] scripts: imx-image: move more variables to context data Sascha Hauer
2016-01-29 10:43 ` [PATCH 19/23] scripts: imx-image: pass config data to add_header_* Sascha Hauer
2016-01-29 10:44 ` [PATCH 20/23] scripts: imx-image: Support adding a Super Root Key to the image Sascha Hauer
2016-01-29 10:44 ` [PATCH 21/23] scripts: imx: Create CSF files from imx config file Sascha Hauer
2016-01-29 10:44 ` [PATCH 22/23] scripts: imx: Allow to create signed images Sascha Hauer
2016-01-29 10:44 ` [PATCH 23/23] scripts: imx: Generate signed images with imx-image Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454064243-26558-3-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox