mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marc Reilly <marc@cpdesign.com.au>
To: barebox@lists.infradead.org
Subject: Re: [PATCH 1/5] mfd: mc13xxx: Allow to set callback for mc13xxx
Date: Mon, 19 May 2014 09:14:19 +1000	[thread overview]
Message-ID: <1457646.XTgHtzepJG@dev2> (raw)
In-Reply-To: <1399534299-27051-2-git-send-email-s.hauer@pengutronix.de>

Hi,

I'm a bit slow on this one, so sorry if I'm too late to the party. :)

Cheers,
Marc


On Thursday, May 08, 2014 09:31:35 AM Sascha Hauer wrote:
> Some boards have to initialize the PMIC before other devices can
> be initialized. This requires three levels of initcalls: one level
> in which the PMIC is probed, one in which the board can call mc13xxx_get()
> and the third one to initialize the PMIC dependent devices.
> 
> Allow to register a callback which is called once the PMIC is initialized.
> This way mc13xxx_get() is no longer necessary and the number of required
> initcalls levels is reduced to two.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/mfd/mc13xxx.c | 18 ++++++++++++++++++
>  drivers/net/fec_imx.h |  1 +
>  include/mfd/mc13xxx.h |  6 ++++++
>  3 files changed, 25 insertions(+)
> 
> diff --git a/drivers/mfd/mc13xxx.c b/drivers/mfd/mc13xxx.c
> index bfbd328..9842c56 100644
> --- a/drivers/mfd/mc13xxx.c
> +++ b/drivers/mfd/mc13xxx.c
> @@ -60,6 +60,21 @@ int mc13xxx_revision(struct mc13xxx *mc13xxx)
>  }
>  EXPORT_SYMBOL(mc13xxx_revision);
> 
> +void(*mc13xxx_callback)(struct mc13xxx *mc13xxx);


Should (can?) this be static?


> +
> +int mc13xxx_register_callback(void(*callback)(struct mc13xxx *mc13xxx))


What about mc13xxx_register_init_callback, or something which makes it more 
apparent when the callback is called.


> +{
> +	if (mc13xxx_callback)
> +		return -EBUSY;
> +
> +	mc13xxx_callback = callback;
> +
> +	if (mc_dev)
> +		mc13xxx_callback(mc_dev);
> +
> +	return 0;
> +}
> +
>  #ifdef CONFIG_SPI
>  static int spi_rw(struct spi_device *spi, void * buf, size_t len)
>  {
> @@ -350,6 +365,9 @@ static int __init mc13xxx_probe(struct device_d *dev)
>  	mc_dev->revision = rev;
>  	devfs_create(&mc_dev->cdev);
> 
> +	if (mc13xxx_callback)
> +		mc13xxx_callback(mc_dev);
> +
>  	return 0;
>  }
> 
> diff --git a/drivers/net/fec_imx.h b/drivers/net/fec_imx.h
> index 0921b52..a77c1dc 100644
> --- a/drivers/net/fec_imx.h
> +++ b/drivers/net/fec_imx.h
> @@ -146,6 +146,7 @@ struct fec_priv {
>  	void (*phy_init)(struct phy_device *dev);
>  	struct clk *clk;
>  	enum fec_type type;
> +	int phy_reset_gpio;


Did this sneak in?


>  };
> 
>  static inline int fec_is_imx27(struct fec_priv *priv)
> diff --git a/include/mfd/mc13xxx.h b/include/mfd/mc13xxx.h
> index 1946b1a..cf5c42d 100644
> --- a/include/mfd/mc13xxx.h
> +++ b/include/mfd/mc13xxx.h
> @@ -171,6 +171,7 @@ extern int mc13xxx_revision(struct mc13xxx *mc13xxx);
>  extern int mc13xxx_reg_read(struct mc13xxx *mc13xxx, u8 reg, u32 *val);
>  extern int mc13xxx_reg_write(struct mc13xxx *mc13xxx, u8 reg, u32 val);
>  extern int mc13xxx_set_bits(struct mc13xxx *mc13xxx, u8 reg, u32 mask, u32
> val); +int mc13xxx_register_callback(void(*callback)(struct mc13xxx
> *mc13xxx)); #else
>  static inline struct mc13xxx *mc13xxx_get(void)
>  {
> @@ -196,6 +197,11 @@ static inline int mc13xxx_set_bits(struct mc13xxx
> *mc13xxx, u8 reg, u32 mask, u3 {
>  	return -ENODEV;
>  }
> +
> +static inline int mc13xxx_register_callback(void(*callback)(struct mc13xxx
> *mc13xxx)) +{
> +	return -ENODEV;
> +}
>  #endif
> 
>  #endif /* __MFD_MC13XXX_H */


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-05-18 23:20 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-08  7:31 [PATCH] fix i.MX51 babbage ethernet Sascha Hauer
2014-05-08  7:31 ` [PATCH 1/5] mfd: mc13xxx: Allow to set callback for mc13xxx Sascha Hauer
2014-05-18 23:14   ` Marc Reilly [this message]
2014-05-19  6:40     ` Sascha Hauer
2014-05-08  7:31 ` [PATCH 2/5] spi: i.MX: Move to coredevice_initcall Sascha Hauer
2014-05-11 18:49   ` Alexander Shiyan
2014-05-12 10:38     ` Sascha Hauer
2014-05-14 17:57       ` Alexander Shiyan
2014-05-19  8:47         ` Sascha Hauer
2014-05-08  7:31 ` [PATCH 3/5] mfd: mc13xxx: move " Sascha Hauer
2014-05-08  7:31 ` [PATCH 4/5] ARM: i.MX51 babbage: use mc13xxx_register_callback to initialize PMIC Sascha Hauer
2014-05-08  7:31 ` [PATCH 5/5] ARM: dts: i.MX51 babbage: overwrite upstream FEC iomux settings Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1457646.XTgHtzepJG@dev2 \
    --to=marc@cpdesign.com.au \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox