mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Stefan Christ <s.christ@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH for next 10/15] ARM: phytec-som-imx6: add phyCORE-i.MX6 Quad 2GiB RAM
Date: Wed, 27 Apr 2016 12:04:44 +0200	[thread overview]
Message-ID: <1461751489-13302-11-git-send-email-s.christ@phytec.de> (raw)
In-Reply-To: <1461751489-13302-1-git-send-email-s.christ@phytec.de>

From: Christian Hemp <c.hemp@phytec.de>

Add new Phytec phyCORE-i.MX6 SOM:
  Support:
    - imx6q-phytec-phycore-som-emmc:
       - 2GiB RAM on 1 Bank with 64Bit
       - 1GBit Ethernet
       - SPI NOR
       - eMMC
       - SD
       - UART

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
---
 .../boards/phytec-som-imx6/flash-header-phytec-pcm058-2gib.imxcfg | 8 ++++++++
 arch/arm/boards/phytec-som-imx6/lowlevel.c                        | 1 +
 images/Makefile.imx                                               | 5 +++++
 3 files changed, 14 insertions(+)
 create mode 100644 arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcm058-2gib.imxcfg

diff --git a/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcm058-2gib.imxcfg b/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcm058-2gib.imxcfg
new file mode 100644
index 0000000..54c9e41
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcm058-2gib.imxcfg
@@ -0,0 +1,8 @@
+#define SETUP_MDCFG0			\
+	wm 32 0x021b000c 0x8c929b85
+
+#define SETUP_MDASP_MDCTL		\
+	wm 32 0x021b0040 0x00000047;	\
+	wm 32 0x021b0000 0x841A0000
+
+#include "flash-header-phytec-pcm058.h"
diff --git a/arch/arm/boards/phytec-som-imx6/lowlevel.c b/arch/arm/boards/phytec-som-imx6/lowlevel.c
index 6506e5f..d2d8b68 100644
--- a/arch/arm/boards/phytec-som-imx6/lowlevel.c
+++ b/arch/arm/boards/phytec-som-imx6/lowlevel.c
@@ -96,3 +96,4 @@ PHYTEC_ENTRY(start_phytec_phyboard_subra_1gib_1bank, imx6q_phytec_phyboard_subra
 PHYTEC_ENTRY(start_phytec_phycore_imx6dl_som_nand_256mb, imx6dl_phytec_phycore_som_nand, SZ_256M, true);
 PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_nand_1gib, imx6q_phytec_phycore_som_nand, SZ_1G, true);
 PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_emmc_1gib, imx6q_phytec_phycore_som_emmc, SZ_1G, true);
+PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_emmc_2gib, imx6q_phytec_phycore_som_emmc, SZ_2G, true);
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 81293fe..b632a58 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -353,6 +353,11 @@ CFG_start_phytec_phycore_imx6q_som_emmc_1gib.pblx.imximg = $(board)/phytec-som-i
 FILE_barebox-phytec-phycore-imx6q-som-emmc-1gib.img = start_phytec_phycore_imx6q_som_emmc_1gib.pblx.imximg
 image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6q-som-emmc-1gib.img
 
+pblx-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6q_som_emmc_2gib
+CFG_start_phytec_phycore_imx6q_som_emmc_2gib.pblx.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcm058-2gib.imxcfg
+FILE_barebox-phytec-phycore-imx6q-som-emmc-2gib.img = start_phytec_phycore_imx6q_som_emmc_2gib.pblx.imximg
+image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6q-som-emmc-2gib.img
+
 pblx-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6dl_som_nand_256mb
 CFG_start_phytec_phycore_imx6dl_som_nand_256mb.pblx.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcm058dl-256mb.imxcfg
 FILE_barebox-phytec-phycore-imx6dl-som-nand-256mb.img = start_phytec_phycore_imx6dl_som_nand_256mb.pblx.imximg
-- 
1.9.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2016-04-27 10:06 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-27 10:04 [PATCH for next 00/15] New Phytec i.MX6 Patches Stefan Christ
2016-04-27 10:04 ` [PATCH for next 01/15] ARM: imx_v7_defconfig: enable NANDTEST command Stefan Christ
2016-04-27 10:04 ` [PATCH for next 02/15] ARM: imx_v7_defconfig: add command mmc_extcsd Stefan Christ
2016-04-27 10:04 ` [PATCH for next 03/15] ARM: imx6q: add support for phyBOARD-SUBRA-i.MX6 Quad Stefan Christ
2016-04-27 10:04 ` [PATCH for next 04/15] imx6qdl-phytec-pfla02.dtsi: add i2c eeprom Stefan Christ
2016-04-27 10:04 ` [PATCH for next 05/15] ARM: dts: imx6: phyboards: reduce clock speed for usdhc3 Stefan Christ
2016-04-27 10:04 ` [PATCH for next 06/15] ARM: dts: pfla02: use long enough reset for ethernet phy Stefan Christ
2016-04-27 10:04 ` [PATCH for next 07/15] ARM: phytec-som-imx6: add barebox partitions for MMC Stefan Christ
2016-04-27 10:04 ` [PATCH for next 08/15] ARM: phytec-som-imx6: add boot device emmc and automount Stefan Christ
2016-04-28  8:34   ` Sascha Hauer
2016-04-28 11:56     ` Holger Schurig
2016-04-28 20:31       ` Trent Piepho
2016-04-29  7:25     ` Stefan Christ
2016-05-02  7:51       ` Sascha Hauer
2016-05-02  9:03         ` Stefan Christ
2016-05-03  7:12           ` Sascha Hauer
2016-04-27 10:04 ` [PATCH for next 09/15] ARM: phytec-som-imx6: fix bootsource for phyCORE-i.MX6 Stefan Christ
2016-04-27 10:04 ` Stefan Christ [this message]
2016-04-27 10:04 ` [PATCH for next 11/15] ARM: phytec-som-imx6: add phyCORE-i.MX6 DualLite Stefan Christ
2016-04-27 10:04 ` [PATCH for next 12/15] ARM: phytec-som-imx6: update RAM calibration for phycore-imx6dl Stefan Christ
2016-04-27 10:04 ` [PATCH for next 13/15] ARM: phytec-som-imx6: rename environment folder Stefan Christ
2016-04-27 10:04 ` [PATCH for next 14/15] ARM: phytec-som-imx6: adapt main update handler for eMMC Stefan Christ
2016-04-27 10:04 ` [PATCH for next 15/15] ARM: phytec-som-imx6: add NOR for phycore-imx6 emmc Stefan Christ

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461751489-13302-11-git-send-email-s.christ@phytec.de \
    --to=s.christ@phytec.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox