From: Stefan Christ <s.christ@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH for next 14/15] ARM: phytec-som-imx6: adapt main update handler for eMMC
Date: Wed, 27 Apr 2016 12:04:48 +0200 [thread overview]
Message-ID: <1461751489-13302-15-git-send-email-s.christ@phytec.de> (raw)
In-Reply-To: <1461751489-13302-1-git-send-email-s.christ@phytec.de>
Some phyCORE-i.MX6 variants have eMMC instead of a NAND chip. Provide an
update_handler for them.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
---
arch/arm/boards/phytec-som-imx6/board.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/phytec-som-imx6/board.c b/arch/arm/boards/phytec-som-imx6/board.c
index 4445b07..40cbcae 100644
--- a/arch/arm/boards/phytec-som-imx6/board.c
+++ b/arch/arm/boards/phytec-som-imx6/board.c
@@ -154,7 +154,14 @@ static int physom_imx6_devices_init(void)
pr_notice("Using environment in %s\n", envdev);
- imx6_bbu_nand_register_handler("nand", BBU_HANDLER_FLAG_DEFAULT);
+ if (of_machine_is_compatible("phytec,imx6q-pcm058-emmc")
+ || of_machine_is_compatible("phytec,imx6dl-pcm058-emmc")) {
+ imx6_bbu_internal_mmc_register_handler("mmc3",
+ "/dev/mmc3",
+ BBU_HANDLER_FLAG_DEFAULT);
+ } else {
+ imx6_bbu_nand_register_handler("nand", BBU_HANDLER_FLAG_DEFAULT);
+ }
defaultenv_append_directory(defaultenv_physom_imx6);
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-04-27 10:06 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-27 10:04 [PATCH for next 00/15] New Phytec i.MX6 Patches Stefan Christ
2016-04-27 10:04 ` [PATCH for next 01/15] ARM: imx_v7_defconfig: enable NANDTEST command Stefan Christ
2016-04-27 10:04 ` [PATCH for next 02/15] ARM: imx_v7_defconfig: add command mmc_extcsd Stefan Christ
2016-04-27 10:04 ` [PATCH for next 03/15] ARM: imx6q: add support for phyBOARD-SUBRA-i.MX6 Quad Stefan Christ
2016-04-27 10:04 ` [PATCH for next 04/15] imx6qdl-phytec-pfla02.dtsi: add i2c eeprom Stefan Christ
2016-04-27 10:04 ` [PATCH for next 05/15] ARM: dts: imx6: phyboards: reduce clock speed for usdhc3 Stefan Christ
2016-04-27 10:04 ` [PATCH for next 06/15] ARM: dts: pfla02: use long enough reset for ethernet phy Stefan Christ
2016-04-27 10:04 ` [PATCH for next 07/15] ARM: phytec-som-imx6: add barebox partitions for MMC Stefan Christ
2016-04-27 10:04 ` [PATCH for next 08/15] ARM: phytec-som-imx6: add boot device emmc and automount Stefan Christ
2016-04-28 8:34 ` Sascha Hauer
2016-04-28 11:56 ` Holger Schurig
2016-04-28 20:31 ` Trent Piepho
2016-04-29 7:25 ` Stefan Christ
2016-05-02 7:51 ` Sascha Hauer
2016-05-02 9:03 ` Stefan Christ
2016-05-03 7:12 ` Sascha Hauer
2016-04-27 10:04 ` [PATCH for next 09/15] ARM: phytec-som-imx6: fix bootsource for phyCORE-i.MX6 Stefan Christ
2016-04-27 10:04 ` [PATCH for next 10/15] ARM: phytec-som-imx6: add phyCORE-i.MX6 Quad 2GiB RAM Stefan Christ
2016-04-27 10:04 ` [PATCH for next 11/15] ARM: phytec-som-imx6: add phyCORE-i.MX6 DualLite Stefan Christ
2016-04-27 10:04 ` [PATCH for next 12/15] ARM: phytec-som-imx6: update RAM calibration for phycore-imx6dl Stefan Christ
2016-04-27 10:04 ` [PATCH for next 13/15] ARM: phytec-som-imx6: rename environment folder Stefan Christ
2016-04-27 10:04 ` Stefan Christ [this message]
2016-04-27 10:04 ` [PATCH for next 15/15] ARM: phytec-som-imx6: add NOR for phycore-imx6 emmc Stefan Christ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461751489-13302-15-git-send-email-s.christ@phytec.de \
--to=s.christ@phytec.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox