From: Alexander Shiyan <shc_work@mail.ru>
To: barebox@lists.infradead.org
Subject: [PATCH] ARM: boards: variscite-mx6: Remove the excess assignment
Date: Sun, 19 Jun 2016 11:31:10 +0300 [thread overview]
Message-ID: <1466325070-20966-1-git-send-email-shc_work@mail.ru> (raw)
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/variscite-mx6/board.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boards/variscite-mx6/board.c b/arch/arm/boards/variscite-mx6/board.c
index 3585deb..267f68c 100644
--- a/arch/arm/boards/variscite-mx6/board.c
+++ b/arch/arm/boards/variscite-mx6/board.c
@@ -47,24 +47,19 @@
static int setup_pmic_voltages(void)
{
unsigned char value, rev_id = 0 ;
- struct i2c_adapter *adapter = NULL;
+ struct i2c_adapter *adapter;
struct i2c_client client;
- int addr = -1, bus = 0;
/* I2C2 bus (2-1 = 1 in barebox numbering) */
- bus = 1;
-
- /* PFUZE100 device address is 0x08 */
- addr = 0x08;
-
- adapter = i2c_get_adapter(bus);
+ adapter = i2c_get_adapter(1);
if (!adapter) {
- pr_err("i2c bus %d not found\n", bus);
+ pr_err("i2c2 bus not found\n");
return -ENODEV;
}
client.adapter = adapter;
- client.addr = addr;
+ /* PFUZE100 device address is 0x08 */
+ client.addr = 0x08;
/* Attempt to locate the PFUZE100 chip. */
if (i2c_read_reg(&client, 0x00, &value, 1) != 1) {
--
2.4.9
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2016-06-19 8:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-19 8:31 Alexander Shiyan [this message]
2016-06-20 6:34 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466325070-20966-1-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox