From: Raphael Poggi <poggi.raph@gmail.com>
To: barebox@lists.infradead.org
Cc: Raphael Poggi <poggi.raph@gmail.com>
Subject: [PATCH v4 10/13] arm: cpu: add basic arm64 mmu support
Date: Wed, 29 Jun 2016 10:22:17 +0200 [thread overview]
Message-ID: <1467188540-76509-11-git-send-email-poggi.raph@gmail.com> (raw)
In-Reply-To: <1467188540-76509-1-git-send-email-poggi.raph@gmail.com>
This commit adds basic mmu support, ie:
- DMA cache handling is not supported
- Remapping memory region also
The current mmu setting is:
- 4KB granularity
- 3 level lookup (skipping L0)
- 33 bits per VA
This is based on coreboot and u-boot mmu configuration.
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
---
arch/arm/cpu/Makefile | 4 +-
arch/arm/cpu/cpu.c | 2 +
arch/arm/cpu/mmu.h | 54 +++++++
arch/arm/cpu/mmu_64.c | 331 +++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/mmu.h | 14 +-
arch/arm/include/asm/pgtable64.h | 140 +++++++++++++++++
6 files changed, 540 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/cpu/mmu_64.c
create mode 100644 arch/arm/include/asm/pgtable64.h
diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
index 7eb06fb..331c1cd 100644
--- a/arch/arm/cpu/Makefile
+++ b/arch/arm/cpu/Makefile
@@ -26,8 +26,8 @@ endif
obj-$(CONFIG_CMD_ARM_CPUINFO) += cpuinfo.o
obj-$(CONFIG_CMD_ARM_MMUINFO) += mmuinfo.o
obj-$(CONFIG_OFDEVICE) += dtb.o
-obj-$(CONFIG_MMU) += mmu.o cache.o mmu-early.o
-pbl-$(CONFIG_MMU) += mmu-early.o
+obj-$(CONFIG_MMU) += cache.o
+
ifeq ($(CONFIG_MMU),)
obj-y += no-mmu.o
endif
diff --git a/arch/arm/cpu/cpu.c b/arch/arm/cpu/cpu.c
index cc54324..b480463 100644
--- a/arch/arm/cpu/cpu.c
+++ b/arch/arm/cpu/cpu.c
@@ -100,7 +100,9 @@ static void arch_shutdown(void)
{
uint32_t r;
+#ifdef CONFIG_MMU
mmu_disable();
+#endif
flush_icache();
#if __LINUX_ARM_ARCH__ <= 7
diff --git a/arch/arm/cpu/mmu.h b/arch/arm/cpu/mmu.h
index 79ebc80..186d408 100644
--- a/arch/arm/cpu/mmu.h
+++ b/arch/arm/cpu/mmu.h
@@ -1,6 +1,60 @@
#ifndef __ARM_MMU_H
#define __ARM_MMU_H
+#ifdef CONFIG_CPU_64v8
+
+#define TCR_FLAGS (TCR_TG0_4K | \
+ TCR_SHARED_OUTER | \
+ TCR_SHARED_INNER | \
+ TCR_IRGN_WBWA | \
+ TCR_ORGN_WBWA | \
+ TCR_T0SZ(BITS_PER_VA))
+
+#ifndef __ASSEMBLY__
+
+static inline void set_ttbr_tcr_mair(int el, uint64_t table, uint64_t tcr, uint64_t attr)
+{
+ asm volatile("dsb sy");
+ if (el == 1) {
+ asm volatile("msr ttbr0_el1, %0" : : "r" (table) : "memory");
+ asm volatile("msr tcr_el1, %0" : : "r" (tcr) : "memory");
+ asm volatile("msr mair_el1, %0" : : "r" (attr) : "memory");
+ } else if (el == 2) {
+ asm volatile("msr ttbr0_el2, %0" : : "r" (table) : "memory");
+ asm volatile("msr tcr_el2, %0" : : "r" (tcr) : "memory");
+ asm volatile("msr mair_el2, %0" : : "r" (attr) : "memory");
+ } else if (el == 3) {
+ asm volatile("msr ttbr0_el3, %0" : : "r" (table) : "memory");
+ asm volatile("msr tcr_el3, %0" : : "r" (tcr) : "memory");
+ asm volatile("msr mair_el3, %0" : : "r" (attr) : "memory");
+ } else {
+ hang();
+ }
+ asm volatile("isb");
+}
+
+static inline uint64_t get_ttbr(int el)
+{
+ uint64_t val;
+ if (el == 1) {
+ asm volatile("mrs %0, ttbr0_el1" : "=r" (val));
+ } else if (el == 2) {
+ asm volatile("mrs %0, ttbr0_el2" : "=r" (val));
+ } else if (el == 3) {
+ asm volatile("mrs %0, ttbr0_el3" : "=r" (val));
+ } else {
+ hang();
+ }
+
+ return val;
+}
+
+void mmu_early_enable(uint64_t membase, uint64_t memsize, uint64_t _ttb);
+
+#endif
+
+#endif /* CONFIG_CPU_64v8 */
+
#ifdef CONFIG_MMU
void __mmu_cache_on(void);
void __mmu_cache_off(void);
diff --git a/arch/arm/cpu/mmu_64.c b/arch/arm/cpu/mmu_64.c
new file mode 100644
index 0000000..bfd80c0
--- /dev/null
+++ b/arch/arm/cpu/mmu_64.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright (c) 2009-2013 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (c) 2016 Raphaël Poggi <poggi.raph@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) "mmu: " fmt
+
+#include <common.h>
+#include <dma-dir.h>
+#include <init.h>
+#include <mmu.h>
+#include <errno.h>
+#include <linux/sizes.h>
+#include <asm/memory.h>
+#include <asm/barebox-arm.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <memory.h>
+#include <asm/system_info.h>
+
+#include "mmu.h"
+
+static uint64_t *ttb;
+static int free_idx;
+
+static void arm_mmu_not_initialized_error(void)
+{
+ /*
+ * This means:
+ * - one of the MMU functions like dma_alloc_coherent
+ * or remap_range is called too early, before the MMU is initialized
+ * - Or the MMU initialization has failed earlier
+ */
+ panic("MMU not initialized\n");
+}
+
+
+/*
+ * Do it the simple way for now and invalidate the entire
+ * tlb
+ */
+static inline void tlb_invalidate(void)
+{
+ unsigned int el = current_el();
+
+ dsb();
+
+ if (el == 1)
+ __asm__ __volatile__("tlbi vmalle1\n\t" : : : "memory");
+ else if (el == 2)
+ __asm__ __volatile__("tlbi alle2\n\t" : : : "memory");
+ else if (el == 3)
+ __asm__ __volatile__("tlbi alle3\n\t" : : : "memory");
+
+ dsb();
+ isb();
+}
+
+static int level2shift(int level)
+{
+ /* Page is 12 bits wide, every level translates 9 bits */
+ return (12 + 9 * (3 - level));
+}
+
+static uint64_t level2mask(int level)
+{
+ uint64_t mask = -EINVAL;
+
+ if (level == 1)
+ mask = L1_ADDR_MASK;
+ else if (level == 2)
+ mask = L2_ADDR_MASK;
+ else if (level == 3)
+ mask = L3_ADDR_MASK;
+
+ return mask;
+}
+
+static int pte_type(uint64_t *pte)
+{
+ return *pte & PMD_TYPE_MASK;
+}
+
+static void set_table(uint64_t *pt, uint64_t *table_addr)
+{
+ uint64_t val;
+
+ val = PMD_TYPE_TABLE | (uint64_t)table_addr;
+ *pt = val;
+}
+
+static uint64_t *create_table(void)
+{
+ uint64_t *new_table = ttb + free_idx * GRANULE_SIZE;
+
+ /* Mark all entries as invalid */
+ memset(new_table, 0, GRANULE_SIZE);
+
+ free_idx++;
+
+ return new_table;
+}
+
+static uint64_t *get_level_table(uint64_t *pte)
+{
+ uint64_t *table = (uint64_t *)(*pte & XLAT_ADDR_MASK);
+
+ if (pte_type(pte) != PMD_TYPE_TABLE) {
+ table = create_table();
+ set_table(pte, table);
+ }
+
+ return table;
+}
+
+static uint64_t *find_pte(uint64_t addr)
+{
+ uint64_t *pte;
+ uint64_t block_shift;
+ uint64_t idx;
+ int i;
+
+ pte = ttb;
+
+ for (i = 1; i < 4; i++) {
+ block_shift = level2shift(i);
+ idx = (addr & level2mask(i)) >> block_shift;
+ pte += idx;
+
+ if ((pte_type(pte) != PMD_TYPE_TABLE) || (block_shift <= GRANULE_SIZE_SHIFT))
+ break;
+ else
+ pte = (uint64_t *)(*pte & XLAT_ADDR_MASK);
+ }
+
+ return pte;
+}
+
+static void map_region(uint64_t virt, uint64_t phys, uint64_t size, uint64_t attr)
+{
+ uint64_t block_size;
+ uint64_t block_shift;
+ uint64_t *pte;
+ uint64_t idx;
+ uint64_t addr;
+ uint64_t *table;
+ int level;
+
+ if (!ttb)
+ arm_mmu_not_initialized_error();
+
+ addr = virt;
+
+ attr &= ~(PMD_TYPE_SECT);
+
+ while (size) {
+ table = ttb;
+ for (level = 1; level < 4; level++) {
+ block_shift = level2shift(level);
+ idx = (addr & level2mask(level)) >> block_shift;
+ block_size = (1 << block_shift);
+
+ pte = table + idx;
+
+ if (level == 3)
+ attr |= PTE_TYPE_PAGE;
+ else
+ attr |= PMD_TYPE_SECT;
+
+ if (size >= block_size && IS_ALIGNED(addr, block_size)) {
+ *pte = phys | attr;
+ addr += block_size;
+ phys += block_size;
+ size -= block_size;
+ break;
+
+ }
+
+ table = get_level_table(pte);
+ }
+
+ }
+}
+
+static void create_sections(uint64_t virt, uint64_t phys, uint64_t size_m, uint64_t flags)
+{
+
+ map_region(virt, phys, size_m, flags);
+ tlb_invalidate();
+}
+
+void *map_io_sections(unsigned long phys, void *_start, size_t size)
+{
+
+ map_region((uint64_t)_start, phys, (uint64_t)size, UNCACHED_MEM);
+
+ tlb_invalidate();
+ return _start;
+}
+
+
+int arch_remap_range(void *_start, size_t size, unsigned flags)
+{
+ map_region((uint64_t)_start, (uint64_t)_start, (uint64_t)size, flags);
+ tlb_invalidate();
+
+ return 0;
+}
+
+/*
+ * Prepare MMU for usage enable it.
+ */
+static int mmu_init(void)
+{
+ struct memory_bank *bank;
+
+ if (list_empty(&memory_banks))
+ /*
+ * If you see this it means you have no memory registered.
+ * This can be done either with arm_add_mem_device() in an
+ * initcall prior to mmu_initcall or via devicetree in the
+ * memory node.
+ */
+ panic("MMU: No memory bank found! Cannot continue\n");
+
+ if (get_cr() & CR_M) {
+ ttb = (uint64_t *)get_ttbr(current_el());
+ if (!request_sdram_region("ttb", (unsigned long)ttb, SZ_16K))
+ /*
+ * This can mean that:
+ * - the early MMU code has put the ttb into a place
+ * which we don't have inside our available memory
+ * - Somebody else has occupied the ttb region which means
+ * the ttb will get corrupted.
+ */
+ pr_crit("Critical Error: Can't request SDRAM region for ttb at %p\n",
+ ttb);
+ } else {
+ ttb = memalign(GRANULE_SIZE, SZ_16K);
+ free_idx = 1;
+
+ memset(ttb, 0, GRANULE_SIZE);
+
+ set_ttbr_tcr_mair(current_el(), (uint64_t)ttb, TCR_FLAGS, UNCACHED_MEM);
+ }
+
+ pr_debug("ttb: 0x%p\n", ttb);
+
+ /* create a flat mapping using 1MiB sections */
+ create_sections(0, 0, GRANULE_SIZE, UNCACHED_MEM);
+
+ /* Map sdram cached. */
+ for_each_memory_bank(bank)
+ create_sections(bank->start, bank->start, bank->size, CACHED_MEM);
+
+ return 0;
+}
+mmu_initcall(mmu_init);
+
+void mmu_enable(void)
+{
+ if (!ttb)
+ arm_mmu_not_initialized_error();
+
+ if (!(get_cr() & CR_M)) {
+
+ isb();
+ set_cr(get_cr() | CR_M | CR_C | CR_I);
+ }
+}
+
+void mmu_disable(void)
+{
+ unsigned int cr;
+
+ if (!ttb)
+ arm_mmu_not_initialized_error();
+
+ cr = get_cr();
+ cr &= ~(CR_M | CR_C | CR_I);
+
+ tlb_invalidate();
+
+ dsb();
+ isb();
+
+ set_cr(cr);
+
+ dsb();
+ isb();
+}
+
+void mmu_early_enable(uint64_t membase, uint64_t memsize, uint64_t _ttb)
+{
+ ttb = (uint64_t *)_ttb;
+
+ memset(ttb, 0, GRANULE_SIZE);
+ free_idx = 1;
+
+ set_ttbr_tcr_mair(current_el(), (uint64_t)ttb, TCR_FLAGS, UNCACHED_MEM);
+
+ create_sections(0, 0, 4096, UNCACHED_MEM);
+
+ create_sections(membase, membase, memsize, CACHED_MEM);
+
+ isb();
+ set_cr(get_cr() | CR_M);
+}
+
+unsigned long virt_to_phys(volatile void *virt)
+{
+ return (unsigned long)virt;
+}
+
+void *phys_to_virt(unsigned long phys)
+{
+ return (void *)phys;
+}
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 8de6544..f68ab37 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -6,16 +6,24 @@
#include <malloc.h>
#include <xfuncs.h>
+#ifdef CONFIG_CPU_64v8
+#include <asm/pgtable64.h>
+
+#define DEV_MEM (PMD_ATTRINDX(MT_DEVICE_nGnRnE) | PMD_SECT_AF | PMD_TYPE_SECT)
+#define CACHED_MEM (PMD_ATTRINDX(MT_NORMAL) | PMD_SECT_S | PMD_SECT_AF | PMD_TYPE_SECT)
+#define UNCACHED_MEM (PMD_ATTRINDX(MT_NORMAL_NC) | PMD_SECT_S | PMD_SECT_AF | PMD_TYPE_SECT)
+#else
#include <asm/pgtable.h>
#define PMD_SECT_DEF_UNCACHED (PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT)
#define PMD_SECT_DEF_CACHED (PMD_SECT_WB | PMD_SECT_DEF_UNCACHED)
+#endif
+
+
struct arm_memory;
-static inline void mmu_enable(void)
-{
-}
+void mmu_enable(void);
void mmu_disable(void);
static inline void arm_create_section(unsigned long virt, unsigned long phys, int size_m,
unsigned int flags)
diff --git a/arch/arm/include/asm/pgtable64.h b/arch/arm/include/asm/pgtable64.h
new file mode 100644
index 0000000..20bea5b
--- /dev/null
+++ b/arch/arm/include/asm/pgtable64.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PGTABLE64_H
+#define __ASM_PGTABLE64_H
+
+#define UL(x) _AC(x, UL)
+
+#define UNUSED_DESC 0x6EbAAD0BBADbA6E0
+
+#define VA_START 0x0
+#define BITS_PER_VA 33
+
+/* Granule size of 4KB is being used */
+#define GRANULE_SIZE_SHIFT 12
+#define GRANULE_SIZE (1 << GRANULE_SIZE_SHIFT)
+#define XLAT_ADDR_MASK ((1UL << BITS_PER_VA) - GRANULE_SIZE)
+#define GRANULE_SIZE_MASK ((1 << GRANULE_SIZE_SHIFT) - 1)
+
+#define BITS_RESOLVED_PER_LVL (GRANULE_SIZE_SHIFT - 3)
+#define L1_ADDR_SHIFT (GRANULE_SIZE_SHIFT + BITS_RESOLVED_PER_LVL * 2)
+#define L2_ADDR_SHIFT (GRANULE_SIZE_SHIFT + BITS_RESOLVED_PER_LVL * 1)
+#define L3_ADDR_SHIFT (GRANULE_SIZE_SHIFT + BITS_RESOLVED_PER_LVL * 0)
+
+
+#define L1_ADDR_MASK (((1UL << BITS_RESOLVED_PER_LVL) - 1) << L1_ADDR_SHIFT)
+#define L2_ADDR_MASK (((1UL << BITS_RESOLVED_PER_LVL) - 1) << L2_ADDR_SHIFT)
+#define L3_ADDR_MASK (((1UL << BITS_RESOLVED_PER_LVL) - 1) << L3_ADDR_SHIFT)
+
+/* These macros give the size of the region addressed by each entry of a xlat
+ table at any given level */
+#define L3_XLAT_SIZE (1UL << L3_ADDR_SHIFT)
+#define L2_XLAT_SIZE (1UL << L2_ADDR_SHIFT)
+#define L1_XLAT_SIZE (1UL << L1_ADDR_SHIFT)
+
+#define GRANULE_MASK GRANULE_SIZE
+
+
+/*
+ * Level 2 descriptor (PMD).
+ */
+#define PMD_TYPE_MASK (3 << 0)
+#define PMD_TYPE_FAULT (0 << 0)
+#define PMD_TYPE_TABLE (3 << 0)
+#define PMD_TYPE_SECT (1 << 0)
+#define PMD_TABLE_BIT (1 << 1)
+
+/*
+ * Section
+ */
+#define PMD_SECT_VALID (1 << 0)
+#define PMD_SECT_USER (1 << 6) /* AP[1] */
+#define PMD_SECT_RDONLY (1 << 7) /* AP[2] */
+#define PMD_SECT_S (3 << 8)
+#define PMD_SECT_AF (1 << 10)
+#define PMD_SECT_NG (1 << 11)
+#define PMD_SECT_CONT (1 << 52)
+#define PMD_SECT_PXN (1 << 53)
+#define PMD_SECT_UXN (1 << 54)
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_ATTRINDX(t) ((t) << 2)
+#define PMD_ATTRINDX_MASK (7 << 2)
+
+/*
+ * Level 3 descriptor (PTE).
+ */
+#define PTE_TYPE_MASK (3 << 0)
+#define PTE_TYPE_FAULT (0 << 0)
+#define PTE_TYPE_PAGE (3 << 0)
+#define PTE_TABLE_BIT (1 << 1)
+#define PTE_USER (1 << 6) /* AP[1] */
+#define PTE_RDONLY (1 << 7) /* AP[2] */
+#define PTE_SHARED (3 << 8) /* SH[1:0], inner shareable */
+#define PTE_AF (1 << 10) /* Access Flag */
+#define PTE_NG (1 << 11) /* nG */
+#define PTE_DBM (1 << 51) /* Dirty Bit Management */
+#define PTE_CONT (1 << 52) /* Contiguous range */
+#define PTE_PXN (1 << 53) /* Privileged XN */
+#define PTE_UXN (1 << 54) /* User XN */
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PTE_ATTRINDX(t) ((t) << 2)
+#define PTE_ATTRINDX_MASK (7 << 2)
+
+/*
+ * Memory types available.
+ */
+#define MT_DEVICE_nGnRnE 0
+#define MT_DEVICE_nGnRE 1
+#define MT_DEVICE_GRE 2
+#define MT_NORMAL_NC 3
+#define MT_NORMAL 4
+#define MT_NORMAL_WT 5
+
+/*
+ * TCR flags.
+ */
+#define TCR_T0SZ(x) ((64 - (x)) << 0)
+#define TCR_IRGN_NC (0 << 8)
+#define TCR_IRGN_WBWA (1 << 8)
+#define TCR_IRGN_WT (2 << 8)
+#define TCR_IRGN_WBNWA (3 << 8)
+#define TCR_IRGN_MASK (3 << 8)
+#define TCR_ORGN_NC (0 << 10)
+#define TCR_ORGN_WBWA (1 << 10)
+#define TCR_ORGN_WT (2 << 10)
+#define TCR_ORGN_WBNWA (3 << 10)
+#define TCR_ORGN_MASK (3 << 10)
+#define TCR_SHARED_NON (0 << 12)
+#define TCR_SHARED_OUTER (2 << 12)
+#define TCR_SHARED_INNER (3 << 12)
+#define TCR_TG0_4K (0 << 14)
+#define TCR_TG0_64K (1 << 14)
+#define TCR_TG0_16K (2 << 14)
+#define TCR_EL1_IPS_BITS (UL(3) << 32) /* 42 bits physical address */
+#define TCR_EL2_IPS_BITS (3 << 16) /* 42 bits physical address */
+#define TCR_EL3_IPS_BITS (3 << 16) /* 42 bits physical address */
+
+#define TCR_EL1_RSVD (1 << 31)
+#define TCR_EL2_RSVD (1 << 31 | 1 << 23)
+#define TCR_EL3_RSVD (1 << 31 | 1 << 23)
+
+#endif
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-06-29 8:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-29 8:22 [PATCH v4 0/12] Add basic support for arm64 Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 01/13] arm64: add armv8 Kconfig entries Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 02/13] arm: Makefile: rework makefile to handle armv8 Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 03/13] arm: rework lib directory to support arm64 Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 04/13] arm: cpu: add arm64 specific code Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 05/13] arm: include: system: add arm64 helper functions Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 06/13] arm: include: bitops: arm64 use generic __fls Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 07/13] arm: include: system_info: add armv8 identification Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 08/13] arm: cpu: cpuinfo: add armv8 support Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 09/13] arm: cpu: disable code portion in armv8 case Raphael Poggi
2016-06-29 8:22 ` Raphael Poggi [this message]
2016-06-29 8:22 ` [PATCH v4 11/13] arm: boards: add mach-qemu and virt64 board Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 12/13] arm: include: swab: use rigth assembly for armv8 Raphael Poggi
2016-06-29 8:22 ` [PATCH v4 13/13] uimage: add define for ARM64 architecture Raphael Poggi
2016-07-04 7:27 ` [PATCH v4 0/12] Add basic support for arm64 Sascha Hauer
2016-07-04 8:38 ` Raphaël Poggi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467188540-76509-11-git-send-email-poggi.raph@gmail.com \
--to=poggi.raph@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox