From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2] mtd: nand: imx-bbm: use raw reading when checking for factory BBM
Date: Fri, 8 Jul 2016 09:25:43 +0200 [thread overview]
Message-ID: <1467962743-15587-1-git-send-email-u.kleine-koenig@pengutronix.de> (raw)
This is necessary to prevent the imx_nand_bbm command to bail out
on ECC errors which leaves the device without BBT.
Also simplify buffer management: Use on-stack buffer instead of malloc.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
Changes since (implicit) v1 sent with Message-Id: 1467884923-24060-1-git-send-email-u.kleine-koenig@pengutronix.de:
- drop two now unused variables fixing two compiler warnings
drivers/mtd/nand/nand_imx_bbm.c | 33 ++++++++++++++++-----------------
1 file changed, 16 insertions(+), 17 deletions(-)
diff --git a/drivers/mtd/nand/nand_imx_bbm.c b/drivers/mtd/nand/nand_imx_bbm.c
index 251dfe5d3f12..23722a906473 100644
--- a/drivers/mtd/nand/nand_imx_bbm.c
+++ b/drivers/mtd/nand/nand_imx_bbm.c
@@ -52,12 +52,20 @@
* on the flash BBT.
*
*/
-static int checkbad(struct mtd_info *mtd, loff_t ofs, void *__buf)
+static int checkbad(struct mtd_info *mtd, loff_t ofs)
{
- int ret, retlen;
- uint8_t *buf = __buf;
-
- ret = mtd->read(mtd, ofs, mtd->writesize, &retlen, buf);
+ int ret;
+ uint8_t buf[mtd->writesize + mtd->oobsize];
+ struct mtd_oob_ops ops;
+
+ ops.mode = MTD_OPS_RAW;
+ ops.ooboffs = 0;
+ ops.datbuf = buf;
+ ops.len = mtd->writesize;
+ ops.oobbuf = buf + mtd->writesize;
+ ops.ooblen = mtd->oobsize;
+
+ ret = mtd_read_oob(mtd, ofs, &ops);
if (ret < 0)
return ret;
@@ -72,7 +80,6 @@ static void *create_bbt(struct mtd_info *mtd)
struct nand_chip *chip = mtd->priv;
int len, i, numblocks, ret;
loff_t from = 0;
- void *buf;
uint8_t *bbt;
if ((chip->bbt_td && chip->bbt_td->pages[0] != -1) ||
@@ -88,18 +95,12 @@ static void *create_bbt(struct mtd_info *mtd)
if (!bbt)
return ERR_PTR(-ENOMEM);
- buf = malloc(mtd->writesize);
- if (!buf) {
- ret = -ENOMEM;
- goto out2;
- }
-
numblocks = mtd->size >> (chip->bbt_erase_shift - 1);
for (i = 0; i < numblocks;) {
- ret = checkbad(mtd, from, buf);
+ ret = checkbad(mtd, from);
if (ret < 0)
- goto out1;
+ goto out;
if (ret) {
bbt[i >> 3] |= 0x03 << (i & 0x6);
@@ -113,9 +114,7 @@ static void *create_bbt(struct mtd_info *mtd)
return bbt;
-out1:
- free(buf);
-out2:
+out:
free(bbt);
return ERR_PTR(ret);
--
2.8.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2016-07-08 7:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-08 7:25 Uwe Kleine-König [this message]
2016-07-11 5:48 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467962743-15587-1-git-send-email-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox