From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from vs81.iboxed.net ([185.82.85.146]) by bombadil.infradead.org with esmtps (Exim 4.85_2 #1 (Red Hat Linux)) id 1bbZDF-00061l-Mq for barebox@lists.infradead.org; Sun, 21 Aug 2016 20:19:22 +0000 From: Alexander Kurz Date: Sun, 21 Aug 2016 22:16:13 +0200 Message-Id: <1471810573-1306-1-git-send-email-akurz@blala.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] scripts: imx-image: DCD check command for v2 only To: barebox@lists.infradead.org Cc: Alexander Kurz DCD check command is currently implemented for imximg v2 only. This command may also be available for v1 as mentioned in IMX35RM as DCD-address-type "wait/read", but due to the lack of further details it will be not supported. Signed-off-by: Alexander Kurz --- scripts/imx/imx-image.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/scripts/imx/imx-image.c b/scripts/imx/imx-image.c index c0bf9c0..d0c4152 100644 --- a/scripts/imx/imx-image.c +++ b/scripts/imx/imx-image.c @@ -450,6 +450,11 @@ static int write_dcd(const char *outfile) static int check(const struct config_data *data, uint32_t cmd, uint32_t addr, uint32_t mask) { + if (data->header_version != 2) { + fprintf(stderr, "DCD check command is not available or " + "not yet implemented for this SOC\n"); + return -EINVAL; + } if (curdcd > MAX_DCD - 3) { fprintf(stderr, "At maximum %d dcd entried are allowed\n", MAX_DCD); return -ENOMEM; -- 2.1.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox