From: Wadim Egorov <w.egorov@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 2/8] clocksource: Add rk3288 timer driver
Date: Wed, 24 Aug 2016 14:49:24 +0200 [thread overview]
Message-ID: <1472042970-35151-2-git-send-email-w.egorov@phytec.de> (raw)
In-Reply-To: <1472042970-35151-1-git-send-email-w.egorov@phytec.de>
This driver comes from the u-boot (v2016.01).
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
Changes since v1:
- moved rk_timer to drivers/clocksource
- rk_timer now binds against a DT node
---
arch/arm/mach-rockchip/Kconfig | 5 ++
arch/arm/mach-rockchip/include/mach/timer.h | 19 ++++++++
drivers/clocksource/Kconfig | 4 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/rk_timer.c | 73 +++++++++++++++++++++++++++++
5 files changed, 102 insertions(+)
create mode 100644 arch/arm/mach-rockchip/include/mach/timer.h
create mode 100644 drivers/clocksource/rk_timer.c
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index e027fae..71fcbe7 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -7,6 +7,10 @@ config ARCH_TEXT_BASE
default 0x68000000 if ARCH_RK3188
default 0x0 if ARCH_RK3288
+config RK_TIMER
+ hex
+ default 1
+
choice
prompt "Select Rockchip SoC"
@@ -15,6 +19,7 @@ config ARCH_RK3188
config ARCH_RK3288
bool "Rockchip RK3288 SoCs"
+ select CLOCKSOURCE_ROCKCHIP
endchoice
comment "select Rockchip boards:"
diff --git a/arch/arm/mach-rockchip/include/mach/timer.h b/arch/arm/mach-rockchip/include/mach/timer.h
new file mode 100644
index 0000000..e6ed0e4
--- /dev/null
+++ b/arch/arm/mach-rockchip/include/mach/timer.h
@@ -0,0 +1,19 @@
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_TIMER_H
+#define _ASM_ARCH_TIMER_H
+
+struct rk_timer {
+ unsigned int timer_load_count0;
+ unsigned int timer_load_count1;
+ unsigned int timer_curr_value0;
+ unsigned int timer_curr_value1;
+ unsigned int timer_ctrl_reg;
+ unsigned int timer_int_status;
+};
+
+#endif
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 3fb09fb..f1ab554 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -49,3 +49,7 @@ config CLOCKSOURCE_ORION
config CLOCKSOURCE_UEMD
bool
depends on ARCH_UEMD
+
+config CLOCKSOURCE_ROCKCHIP
+ bool
+ depends on ARCH_ROCKCHIP
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 4eb1656..39982ff 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_CLOCKSOURCE_MVEBU) += mvebu.o
obj-$(CONFIG_CLOCKSOURCE_NOMADIK) += nomadik.o
obj-$(CONFIG_CLOCKSOURCE_ORION) += orion.o
obj-$(CONFIG_CLOCKSOURCE_UEMD) += uemd.o
+obj-$(CONFIG_CLOCKSOURCE_ROCKCHIP)+= rk_timer.o
diff --git a/drivers/clocksource/rk_timer.c b/drivers/clocksource/rk_timer.c
new file mode 100644
index 0000000..baa517c
--- /dev/null
+++ b/drivers/clocksource/rk_timer.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ *
+ * (C) Copyright 2016 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <clock.h>
+#include <init.h>
+#include <io.h>
+#include <mach/timer.h>
+#include <stdio.h>
+#include <mach/hardware.h>
+#include <mach/cru_rk3288.h>
+#include <common.h>
+
+struct rk_timer *timer_ptr;
+
+static uint64_t rockchip_get_ticks(void)
+{
+ uint64_t timebase_h, timebase_l;
+
+ timebase_l = readl(&timer_ptr->timer_curr_value0);
+ timebase_h = readl(&timer_ptr->timer_curr_value1);
+
+ return timebase_h << 32 | timebase_l;
+}
+
+static struct clocksource rkcs = {
+ .read = rockchip_get_ticks,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 10,
+};
+
+static int rockchip_timer_probe(struct device_d *dev)
+{
+ struct resource *iores;
+
+ iores = dev_request_mem_resource(dev, 0);
+ if (IS_ERR(iores))
+ return PTR_ERR(iores);
+ timer_ptr = IOMEM(iores->start) + 0x20 * CONFIG_RK_TIMER;
+
+ rkcs.mult = clocksource_hz2mult(OSC_HZ, rkcs.shift);
+
+ writel(0xffffffff, &timer_ptr->timer_load_count0);
+ writel(0xffffffff, &timer_ptr->timer_load_count1);
+ writel(1, &timer_ptr->timer_ctrl_reg);
+
+ return init_clock(&rkcs);
+}
+
+static __maybe_unused struct of_device_id rktimer_dt_ids[] = {
+ {
+ .compatible = "rockchip,rk3288-timer",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d rktimer_driver = {
+ .name = "rockchip-timer",
+ .probe = rockchip_timer_probe,
+ .of_compatible = DRV_OF_COMPAT(rktimer_dt_ids),
+};
+
+static int rktimer_init(void)
+{
+ return platform_driver_register(&rktimer_driver);
+}
+core_initcall(rktimer_init);
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-08-24 12:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-24 12:49 [PATCH v2 1/8] ARM: rockchip: Add basic RK3288 support Wadim Egorov
2016-08-24 12:49 ` Wadim Egorov [this message]
2016-08-24 12:49 ` [PATCH v2 3/8] ARM: rockchip: Add early debug support for RK3288 Wadim Egorov
2016-08-24 12:49 ` [PATCH v2 4/8] clk: Add RK3288 clock driver Wadim Egorov
2016-08-24 12:49 ` [PATCH v2 5/8] mci: dw_mmc: Add RK3288 compatible string Wadim Egorov
2016-08-24 12:49 ` [PATCH v2 6/8] ARM: Add phyCORE-RK3288 SOM support Wadim Egorov
2016-08-26 5:43 ` Sascha Hauer
2016-08-24 12:49 ` [PATCH v2 7/8] configs: Add RK3288 defconfig Wadim Egorov
2016-08-24 12:49 ` [PATCH v2 8/8] doc: Add RK3288 Documentation Wadim Egorov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472042970-35151-2-git-send-email-w.egorov@phytec.de \
--to=w.egorov@phytec.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox