From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.85_2 #1 (Red Hat Linux)) id 1bn3D1-00079V-15 for barebox@lists.infradead.org; Thu, 22 Sep 2016 12:34:43 +0000 From: Steffen Trumtrar Date: Thu, 22 Sep 2016 14:33:47 +0200 Message-Id: <1474547628-16751-2-git-send-email-s.trumtrar@pengutronix.de> In-Reply-To: <1474547628-16751-1-git-send-email-s.trumtrar@pengutronix.de> References: <1474547628-16751-1-git-send-email-s.trumtrar@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 2/3] watchdog: add designware driver To: barebox@lists.infradead.org Cc: Steffen Trumtrar Port the linux v4.8-rc1 Synopsys DesignWare watchdog driver to barebox. Signed-off-by: Steffen Trumtrar --- drivers/watchdog/Kconfig | 6 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/dw_wdt.c | 194 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 201 insertions(+) create mode 100644 drivers/watchdog/dw_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 60a56bf4b030..63fb1a8c5701 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -16,6 +16,12 @@ config WATCHDOG_DAVINCI help Add support for watchdog on the TI Davinci SoC. +config WATCHDOG_DW + bool "Synopsys DesignWare watchdog" + select RESET_CONTROLLER + help + Add support for the Synopsys DesignWare watchdog timer. + config WATCHDOG_MXS28 bool "i.MX28" depends on ARCH_IMX28 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index e3afe1c27efb..5fca4c368c40 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -2,5 +2,6 @@ obj-$(CONFIG_WATCHDOG) += wd_core.o obj-$(CONFIG_WATCHDOG_DAVINCI) += davinci_wdt.o obj-$(CONFIG_WATCHDOG_OMAP) += omap_wdt.o obj-$(CONFIG_WATCHDOG_MXS28) += im28wd.o +obj-$(CONFIG_WATCHDOG_DW) += dw_wdt.o obj-$(CONFIG_WATCHDOG_JZ4740) += jz4740.o obj-$(CONFIG_WATCHDOG_IMX_RESET_SOURCE) += imxwd.o diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c new file mode 100644 index 000000000000..9cd323ba4e83 --- /dev/null +++ b/drivers/watchdog/dw_wdt.c @@ -0,0 +1,194 @@ +/* + * Copyright 2010-2011 Picochip Ltd., Jamie Iles + * http://www.picochip.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This file implements a driver for the Synopsys DesignWare watchdog device + * in the many subsystems. The watchdog has 16 different timeout periods + * and these are a function of the input clock frequency. + * + * The DesignWare watchdog cannot be stopped once it has been started so we + * do not implement a stop function. The watchdog core will continue to send + * heartbeat requests after the watchdog device has been closed. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define WDOG_CONTROL_REG_OFFSET 0x00 +#define WDOG_CONTROL_REG_WDT_EN_MASK 0x01 +#define WDOG_TIMEOUT_RANGE_REG_OFFSET 0x04 +#define WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT 4 +#define WDOG_CURRENT_COUNT_REG_OFFSET 0x08 +#define WDOG_COUNTER_RESTART_REG_OFFSET 0x0c +#define WDOG_COUNTER_RESTART_KICK_VALUE 0x76 + +/* The maximum TOP (timeout period) value that can be set in the watchdog. */ +#define DW_WDT_MAX_TOP 15 + +#define DW_WDT_DEFAULT_SECONDS 30 + +struct dw_wdt { + void __iomem *regs; + struct clk *clk; + struct restart_handler restart; + struct watchdog wdd; + struct reset_control *rst; +}; + +#define to_dw_wdt(wdd) container_of(wdd, struct dw_wdt, wdd) + +static inline int dw_wdt_top_in_seconds(struct dw_wdt *dw_wdt, unsigned top) +{ + /* + * There are 16 possible timeout values in 0..15 where the number of + * cycles is 2 ^ (16 + i) and the watchdog counts down. + */ + return (1U << (16 + top)) / clk_get_rate(dw_wdt->clk); +} + +static int dw_wdt_start(struct watchdog *wdd) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + + writel(WDOG_CONTROL_REG_WDT_EN_MASK, + dw_wdt->regs + WDOG_CONTROL_REG_OFFSET); + + return 0; +} + +static int dw_wdt_stop(struct watchdog *wdd) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + + if (IS_ERR(dw_wdt->rst)) { + pr_warn("No reset line. Will not stop.\n"); + return PTR_ERR(dw_wdt->rst); + } + + reset_control_assert(dw_wdt->rst); + reset_control_deassert(dw_wdt->rst); + + return 0; +} + +static int dw_wdt_set_timeout(struct watchdog *wdd, unsigned int top_s) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + int i, top_val = DW_WDT_MAX_TOP; + printk("%s\n", __func__); + + if (top_s == 0) + return dw_wdt_stop(wdd); + + /* + * Iterate over the timeout values until we find the closest match. We + * always look for >=. + */ + for (i = 0; i <= DW_WDT_MAX_TOP; ++i) { + printk("%s: %d\n", __func__, dw_wdt_top_in_seconds(dw_wdt, i)); + if (dw_wdt_top_in_seconds(dw_wdt, i) >= top_s) { + top_val = i; + break; + } + } + + /* + * Set the new value in the watchdog. Some versions of dw_wdt + * have have TOPINIT in the TIMEOUT_RANGE register (as per + * CP_WDT_DUAL_TOP in WDT_COMP_PARAMS_1). On those we + * effectively get a pat of the watchdog right here. + */ + writel(top_val | top_val << WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT, + dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET); + + dw_wdt_start(wdd); + + return 0; +} + +static void __noreturn dw_wdt_restart_handle(struct restart_handler *rst) +{ + struct dw_wdt *dw_wdt; + + dw_wdt = container_of(rst, struct dw_wdt, restart); + + dw_wdt->wdd.set_timeout(&dw_wdt->wdd, -1); + + mdelay(1000); + + hang(); +} + +static int dw_wdt_drv_probe(struct device_d *dev) +{ + struct watchdog *wdd; + struct dw_wdt *dw_wdt; + struct resource *mem; + int ret; + + dw_wdt = xzalloc(sizeof(*dw_wdt)); + + mem = dev_request_mem_resource(dev, 0); + dw_wdt->regs = IOMEM(mem->start); + if (IS_ERR(dw_wdt->regs)) + return PTR_ERR(dw_wdt->regs); + + dw_wdt->clk = clk_get(dev, NULL); + if (IS_ERR(dw_wdt->clk)) + return PTR_ERR(dw_wdt->clk); + + ret = clk_enable(dw_wdt->clk); + if (ret) + return ret; + + dw_wdt->rst = reset_control_get(dev, "dw-wdt"); + if (IS_ERR(dw_wdt->rst)) + dev_warn(dev, "No reset lines. Will not be able to stop once started.\n"); + + wdd = &dw_wdt->wdd; + wdd->name = "dw_wdt"; + wdd->set_timeout = dw_wdt_set_timeout; + + ret = watchdog_register(wdd); + if (ret) + goto out_disable_clk; + + dw_wdt->restart.name = "dw_wdt"; + dw_wdt->restart.restart = dw_wdt_restart_handle; + + ret = restart_handler_register(&dw_wdt->restart); + if (ret) + pr_warn("cannot register restart handler\n"); + + if (!IS_ERR(dw_wdt->rst)) + reset_control_deassert(dw_wdt->rst); + + return 0; + +out_disable_clk: + clk_disable(dw_wdt->clk); + return ret; +} + +static struct of_device_id dw_wdt_of_match[] = { + { .compatible = "snps,dw-wdt", }, + { /* sentinel */ } +}; + +static struct driver_d dw_wdt_driver = { + .probe = dw_wdt_drv_probe, + .of_compatible = DRV_OF_COMPAT(dw_wdt_of_match), +}; +device_platform_driver(dw_wdt_driver); -- 2.8.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox