From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-pa0-x244.google.com ([2607:f8b0:400e:c03::244]) by bombadil.infradead.org with esmtps (Exim 4.85_2 #1 (Red Hat Linux)) id 1br4Qu-0008Gf-6P for barebox@lists.infradead.org; Mon, 03 Oct 2016 14:41:40 +0000 Received: by mail-pa0-x244.google.com with SMTP id t6so5024252pae.2 for ; Mon, 03 Oct 2016 07:41:16 -0700 (PDT) From: Andrey Smirnov Date: Mon, 3 Oct 2016 07:40:50 -0700 Message-Id: <1475505657-898-14-git-send-email-andrew.smirnov@gmail.com> In-Reply-To: <1475505657-898-1-git-send-email-andrew.smirnov@gmail.com> References: <1475505657-898-1-git-send-email-andrew.smirnov@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 13/20] i.MX: Add 'lpuart' serial driver To: barebox@lists.infradead.org Cc: Andrey Smirnov Add 'lpuart' serial driver, based on analogous driver from U-Boot Signed-off-by: Andrey Smirnov --- drivers/serial/Kconfig | 4 + drivers/serial/Makefile | 1 + drivers/serial/serial_lpuart.c | 217 +++++++++++++++++++++++++++++++++++++++++ include/serial/lpuart.h | 28 ++++-- 4 files changed, 244 insertions(+), 6 deletions(-) create mode 100644 drivers/serial/serial_lpuart.c diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 146bf1e..02e869a 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -137,4 +137,8 @@ config DRIVER_SERIAL_DIGIC bool "Canon DIGIC serial driver" depends on ARCH_DIGIC +config DRIVER_SERIAL_LPUART + depends on ARCH_IMX + bool "LPUART serial driver" + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 189e777..7d1bae1 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_DRIVER_SERIAL_AUART) += serial_auart.o obj-$(CONFIG_DRIVER_SERIAL_CADENCE) += serial_cadence.o obj-$(CONFIG_DRIVER_SERIAL_EFI_STDIO) += efi-stdio.o obj-$(CONFIG_DRIVER_SERIAL_DIGIC) += serial_digic.o +obj-$(CONFIG_DRIVER_SERIAL_LPUART) += serial_lpuart.o diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c new file mode 100644 index 0000000..52fb6d3 --- /dev/null +++ b/drivers/serial/serial_lpuart.c @@ -0,0 +1,217 @@ +/* + * Copyright (c) 2016 Zodiac Inflight Innovation + * Author: Andrey Smirnov + * + * Based on analogous driver from U-Boot + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct lpuart { + struct console_device cdev; + int baudrate; + int dte_mode; + struct notifier_block notify; + struct resource *io; + void __iomem *base; + struct clk *clk; +}; + +static struct lpuart *cdev_to_lpuart(struct console_device *cdev) +{ + return container_of(cdev, struct lpuart, cdev); +} + +static struct lpuart *nb_to_lpuart(struct notifier_block *nb) +{ + return container_of(nb, struct lpuart, notify); +} + +static void lpuart_enable(struct lpuart *lpuart, bool on) +{ + u8 ctrl; + + ctrl = readb(lpuart->base + UARTCR2); + if (on) + ctrl |= UARTCR2_TE | UARTCR2_RE; + else + ctrl &= ~(UARTCR2_TE | UARTCR2_RE); + writeb(ctrl, lpuart->base + UARTCR2); +} + +static int lpuart_serial_setbaudrate(struct console_device *cdev, + int baudrate) +{ + struct lpuart *lpuart = cdev_to_lpuart(cdev); + + lpuart_enable(lpuart, false); + + lpuart_setbrg(lpuart->base, + clk_get_rate(lpuart->clk), + baudrate); + + lpuart_enable(lpuart, true); + + lpuart->baudrate = baudrate; + + return 0; +} + +static int lpuart_serial_getc(struct console_device *cdev) +{ + bool ready; + struct lpuart *lpuart = cdev_to_lpuart(cdev); + + do { + const u8 sr1 = readb(lpuart->base + UARTSR1); + ready = !!(sr1 & (UARTSR1_OR | UARTSR1_RDRF)); + } while (!ready); + + return readb(lpuart->base + UARTDR); +} + +static void lpuart_serial_putc(struct console_device *cdev, char c) +{ + lpuart_putc(cdev_to_lpuart(cdev)->base, c); +} + +/* Test whether a character is in the RX buffer */ +static int lpuart_serial_tstc(struct console_device *cdev) +{ + return !!readb(cdev_to_lpuart(cdev)->base + UARTRCFIFO); +} + +static void lpuart_serial_flush(struct console_device *cdev) +{ + bool tx_empty; + struct lpuart *lpuart = cdev_to_lpuart(cdev); + + do { + const u8 sr1 = readb(lpuart->base + UARTSR1); + tx_empty = !!(sr1 & UARTSR1_TDRE); + } while (!tx_empty); +} + +static int lpuart_clocksource_clock_change(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct lpuart *lpuart = nb_to_lpuart(nb); + + return lpuart_serial_setbaudrate(&lpuart->cdev, lpuart->baudrate); +} + +static int lpuart_serial_probe(struct device_d *dev) +{ + int ret; + struct console_device *cdev; + struct lpuart *lpuart; + const char *devname; + + lpuart = xzalloc(sizeof(*lpuart)); + cdev = &lpuart->cdev; + dev->priv = lpuart; + + lpuart->io = dev_request_mem_resource(dev, 0); + if (IS_ERR(lpuart->io)) { + ret = PTR_ERR(lpuart->io); + goto err_free; + } + lpuart->base = IOMEM(lpuart->io->start); + + lpuart->clk = clk_get(dev, NULL); + if (IS_ERR(lpuart->clk)) { + ret = PTR_ERR(lpuart->clk); + dev_err(dev, "Failed to get UART clock %d\n", ret); + goto io_release; + } + + ret = clk_enable(lpuart->clk); + if (ret) { + dev_err(dev, "Failed to enable UART clock %d\n", ret); + goto io_release; + } + + cdev->dev = dev; + cdev->tstc = lpuart_serial_tstc; + cdev->putc = lpuart_serial_putc; + cdev->getc = lpuart_serial_getc; + cdev->flush = lpuart_serial_flush; + cdev->setbrg = lpuart_serial_setbaudrate; + + if (dev->device_node) { + devname = of_alias_get(dev->device_node); + if (devname) { + cdev->devname = xstrdup(devname); + cdev->devid = DEVICE_ID_SINGLE; + } + } + + cdev->linux_console_name = "ttyLP"; + + lpuart_setup_with_fifo(lpuart->base, + clk_get_rate(lpuart->clk), + 15); + + ret = console_register(cdev); + if (!ret) { + lpuart->notify.notifier_call = lpuart_clocksource_clock_change; + clock_register_client(&lpuart->notify); + + return 0; + } + + clk_put(lpuart->clk); +io_release: + release_region(lpuart->io); +err_free: + free(lpuart); + + return ret; +} + +static void lpuart_serial_remove(struct device_d *dev) +{ + struct lpuart *lpuart = dev->priv; + + lpuart_serial_flush(&lpuart->cdev); + console_unregister(&lpuart->cdev); + release_region(lpuart->io); + clk_put(lpuart->clk); + + free(lpuart); +} + +static struct of_device_id lpuart_serial_dt_ids[] = { + { .compatible = "fsl,vf610-lpuart" }, + {} +}; + +static struct driver_d lpuart_serial_driver = { + .name = "lpuart-serial", + .probe = lpuart_serial_probe, + .remove = lpuart_serial_remove, + .of_compatible = DRV_OF_COMPAT(lpuart_serial_dt_ids), +}; +console_platform_driver(lpuart_serial_driver); diff --git a/include/serial/lpuart.h b/include/serial/lpuart.h index 13077f9..632e976 100644 --- a/include/serial/lpuart.h +++ b/include/serial/lpuart.h @@ -225,25 +225,35 @@ static inline void lpuart_setbrg(void __iomem *base, unsigned int refclock, unsigned int baudrate) { + unsigned int bfra; u16 sbr; + sbr = (u16) (refclock / (16 * baudrate)); writeb(sbr >> 8, base + UARTBDH); writeb(sbr & 0xff, base + UARTBDL); + + bfra = DIV_ROUND_UP(2 * refclock, baudrate) - 32 * sbr; + bfra &= UARTCR4_BRFA_MASK; + writeb(bfra, base + UARTCR4); } -static inline void lpuart_setup(void __iomem *base, - unsigned int refclock) +static inline void lpuart_setup_with_fifo(void __iomem *base, + unsigned int refclock, + unsigned int twfifo) { - /* Disable UART */ writeb(0, base + UARTCR2); writeb(0, base + UARTMODEM); writeb(0, base + UARTCR1); - /* Disable FIFOs */ - writeb(0, base + UARTPFIFO); - writeb(0, base + UARTTWFIFO); + if (twfifo) { + writeb(UARTPFIFO_TXFE | UARTPFIFO_RXFE, base + UARTPFIFO); + writeb((u8)twfifo, base + UARTTWFIFO); + } else { + writeb(0, base + UARTPFIFO); + writeb(0, base + UARTTWFIFO); + } writeb(1, base + UARTRWFIFO); writeb(UARTCFIFO_RXFLUSH | UARTCFIFO_TXFLUSH, base + UARTCFIFO); @@ -252,6 +262,12 @@ static inline void lpuart_setup(void __iomem *base, writeb(UARTCR2_TE | UARTCR2_RE, base + UARTCR2); } +static inline void lpuart_setup(void __iomem *base, + unsigned int refclock) +{ + lpuart_setup_with_fifo(base, refclock, 0x00); +} + static inline void lpuart_putc(void __iomem *base, int c) { if (!(readb(base + UARTCR2) & UARTCR2_TE)) -- 2.5.5 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox