From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 00/28] Vybrid support in Barebox
Date: Wed, 9 Nov 2016 08:13:48 -0800 [thread overview]
Message-ID: <1478708056-7875-1-git-send-email-andrew.smirnov@gmail.com> (raw)
Hi everyone,
It took me a bit more than a month, but I finally put together a
second version (for v1 see [1]) of the Vybrid support patchset.
Some highlights of this version:
- Various code/commit arrangement feedback for v1 is addressed
- Added commit to move all of the i.MX clock code to drivers/clk
(Sascha, we'd probably have to coordinate with your i.MX6ul
patches on this one)
- I2C commit split in two
- clock tree is reconciled with Linux code, since having a custom
version of it proved to be difficult to compare agains Linux's
implementation
- GPIO driver (tested on a custom Vybrid board)
- FEC support (tested on a custom Vybrid board)
Any feedback is, as always, very much appreciated.
Thank you,
Andrey Smirnov
[1] http://lists.infradead.org/pipermail/barebox/2016-October/028225.html
Andrey Smirnov (28):
i.MX: Add primitive functions for VF610 family
i.MX: Add register definitions for VF610 SoC
i.MX: Add DEBUG_LL hooks for VF610
i.MX: scripts: Add "vf610" soc to imx-image
i.MX: Add support for VF610 Tower board
pinctrl: Add provisions to control GPIO pin direction
i.MX: Add pinctrl driver for VF610
clk: Port clock dependency resolution code
clk: Port of_clk_set_defaults()
i.MX: Move clk code from 'mach-imx' to 'drivers'
i.MX: clk: Port imx_clk_gate2_cgr()
i.MX: clk: Add IMX_PLLV3_USB_VF610 support
i.MX: clk: Port imx_check_clocks()
i.MX: clk: Port imx_clk_mux_flags from Linux
i.MX: Add VF610 clock tree initialization code
vf610: Give enet_osc explicit "enet_ext" name
i.MX: Add 'lpuart' serial driver
i.MX: i2c: Use read/write adapter functions
i.MX: i2c: Add Vybrid support
i.MX: esdhc: Do not rely on CPU type for quirks
i.MX: esdhc: Request "per" clock explicitly
i.MX: Kconfig: Enable OCOTP on Vybrid
i.MX: ocotp: Remove unused #define
i.MX: ocotp: Account for shadow memory gaps
i.MX: ocotp: Add Vybrid support
i.MX: fec: Enable all clocks specified for FEC
i.MX: fec: Add support for Vybrid variant
gpio: Add GPIO driver for Vybrid
arch/arm/boards/Makefile | 1 +
arch/arm/boards/freescale-vf610-twr/Makefile | 3 +
.../flash-header-vf610-twr.imxcfg | 278 +++++++++++
arch/arm/boards/freescale-vf610-twr/lowlevel.c | 45 ++
arch/arm/dts/Makefile | 1 +
arch/arm/dts/vf610-twr.dts | 18 +
arch/arm/mach-imx/Kconfig | 16 +-
arch/arm/mach-imx/Makefile | 23 +-
arch/arm/mach-imx/clk-gate-exclusive.c | 103 ----
arch/arm/mach-imx/clk-gate2.c | 145 ------
arch/arm/mach-imx/clk-imx1.c | 121 -----
arch/arm/mach-imx/clk-imx21.c | 196 --------
arch/arm/mach-imx/clk-imx25.c | 200 --------
arch/arm/mach-imx/clk-imx27.c | 270 ----------
arch/arm/mach-imx/clk-imx31.c | 146 ------
arch/arm/mach-imx/clk-imx35.c | 219 ---------
arch/arm/mach-imx/clk-imx5.c | 533 --------------------
arch/arm/mach-imx/clk-imx6.c | 541 ---------------------
arch/arm/mach-imx/clk-imx6sx.c | 483 ------------------
arch/arm/mach-imx/clk-pfd.c | 148 ------
arch/arm/mach-imx/clk-pllv1.c | 95 ----
arch/arm/mach-imx/clk-pllv2.c | 230 ---------
arch/arm/mach-imx/clk-pllv3.c | 326 -------------
arch/arm/mach-imx/clk.h | 104 ----
arch/arm/mach-imx/cpu_init.c | 5 +
arch/arm/mach-imx/imx.c | 4 +
arch/arm/mach-imx/include/mach/clock-vf610.h | 171 +++++++
arch/arm/mach-imx/include/mach/debug_ll.h | 27 +-
arch/arm/mach-imx/include/mach/generic.h | 13 +
arch/arm/mach-imx/include/mach/imx_cpu_types.h | 1 +
arch/arm/mach-imx/include/mach/iomux-vf610.h | 226 +++++++++
arch/arm/mach-imx/include/mach/vf610-regs.h | 110 +++++
arch/arm/mach-imx/ocotp.c | 51 +-
common/Kconfig | 10 +-
drivers/clk/Makefile | 3 +-
drivers/clk/clk-conf.c | 144 ++++++
drivers/clk/clk.c | 91 +++-
drivers/clk/imx/Makefile | 21 +
drivers/clk/imx/clk-gate-exclusive.c | 103 ++++
drivers/clk/imx/clk-gate2.c | 147 ++++++
drivers/clk/imx/clk-imx1.c | 121 +++++
drivers/clk/imx/clk-imx21.c | 196 ++++++++
drivers/clk/imx/clk-imx25.c | 200 ++++++++
drivers/clk/imx/clk-imx27.c | 270 ++++++++++
drivers/clk/imx/clk-imx31.c | 146 ++++++
drivers/clk/imx/clk-imx35.c | 219 +++++++++
drivers/clk/imx/clk-imx5.c | 533 ++++++++++++++++++++
drivers/clk/imx/clk-imx6.c | 541 +++++++++++++++++++++
drivers/clk/imx/clk-imx6sx.c | 483 ++++++++++++++++++
drivers/clk/imx/clk-pfd.c | 148 ++++++
drivers/clk/imx/clk-pllv1.c | 95 ++++
drivers/clk/imx/clk-pllv2.c | 230 +++++++++
drivers/clk/imx/clk-pllv3.c | 329 +++++++++++++
drivers/clk/imx/clk-vf610.c | 443 +++++++++++++++++
drivers/clk/imx/clk.c | 21 +
drivers/clk/imx/clk.h | 123 +++++
drivers/gpio/Kconfig | 3 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-vf610.c | 181 +++++++
drivers/i2c/busses/i2c-imx.c | 225 ++++++---
drivers/mci/imx-esdhc.c | 123 ++++-
drivers/net/fec_imx.c | 74 ++-
drivers/net/fec_imx.h | 10 +-
drivers/pinctrl/Kconfig | 5 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-vf610.c | 167 +++++++
drivers/pinctrl/pinctrl.c | 45 ++
drivers/serial/Kconfig | 5 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_lpuart.c | 217 +++++++++
images/Makefile.imx | 5 +
include/linux/clk/clk-conf.h | 14 +
include/pinctrl.h | 21 +
include/serial/lpuart.h | 281 +++++++++++
scripts/imx/imx.c | 1 +
75 files changed, 6870 insertions(+), 3980 deletions(-)
create mode 100644 arch/arm/boards/freescale-vf610-twr/Makefile
create mode 100644 arch/arm/boards/freescale-vf610-twr/flash-header-vf610-twr.imxcfg
create mode 100644 arch/arm/boards/freescale-vf610-twr/lowlevel.c
create mode 100644 arch/arm/dts/vf610-twr.dts
delete mode 100644 arch/arm/mach-imx/clk-gate-exclusive.c
delete mode 100644 arch/arm/mach-imx/clk-gate2.c
delete mode 100644 arch/arm/mach-imx/clk-imx1.c
delete mode 100644 arch/arm/mach-imx/clk-imx21.c
delete mode 100644 arch/arm/mach-imx/clk-imx25.c
delete mode 100644 arch/arm/mach-imx/clk-imx27.c
delete mode 100644 arch/arm/mach-imx/clk-imx31.c
delete mode 100644 arch/arm/mach-imx/clk-imx35.c
delete mode 100644 arch/arm/mach-imx/clk-imx5.c
delete mode 100644 arch/arm/mach-imx/clk-imx6.c
delete mode 100644 arch/arm/mach-imx/clk-imx6sx.c
delete mode 100644 arch/arm/mach-imx/clk-pfd.c
delete mode 100644 arch/arm/mach-imx/clk-pllv1.c
delete mode 100644 arch/arm/mach-imx/clk-pllv2.c
delete mode 100644 arch/arm/mach-imx/clk-pllv3.c
delete mode 100644 arch/arm/mach-imx/clk.h
create mode 100644 arch/arm/mach-imx/include/mach/clock-vf610.h
create mode 100644 arch/arm/mach-imx/include/mach/iomux-vf610.h
create mode 100644 arch/arm/mach-imx/include/mach/vf610-regs.h
create mode 100644 drivers/clk/clk-conf.c
create mode 100644 drivers/clk/imx/Makefile
create mode 100644 drivers/clk/imx/clk-gate-exclusive.c
create mode 100644 drivers/clk/imx/clk-gate2.c
create mode 100644 drivers/clk/imx/clk-imx1.c
create mode 100644 drivers/clk/imx/clk-imx21.c
create mode 100644 drivers/clk/imx/clk-imx25.c
create mode 100644 drivers/clk/imx/clk-imx27.c
create mode 100644 drivers/clk/imx/clk-imx31.c
create mode 100644 drivers/clk/imx/clk-imx35.c
create mode 100644 drivers/clk/imx/clk-imx5.c
create mode 100644 drivers/clk/imx/clk-imx6.c
create mode 100644 drivers/clk/imx/clk-imx6sx.c
create mode 100644 drivers/clk/imx/clk-pfd.c
create mode 100644 drivers/clk/imx/clk-pllv1.c
create mode 100644 drivers/clk/imx/clk-pllv2.c
create mode 100644 drivers/clk/imx/clk-pllv3.c
create mode 100644 drivers/clk/imx/clk-vf610.c
create mode 100644 drivers/clk/imx/clk.c
create mode 100644 drivers/clk/imx/clk.h
create mode 100644 drivers/gpio/gpio-vf610.c
create mode 100644 drivers/pinctrl/pinctrl-vf610.c
create mode 100644 drivers/serial/serial_lpuart.c
create mode 100644 include/linux/clk/clk-conf.h
create mode 100644 include/serial/lpuart.h
--
2.5.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2016-11-09 16:15 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-09 16:13 Andrey Smirnov [this message]
2016-11-09 16:13 ` [PATCH v2 01/28] i.MX: Add primitive functions for VF610 family Andrey Smirnov
2016-11-09 16:13 ` [PATCH v2 02/28] i.MX: Add register definitions for VF610 SoC Andrey Smirnov
2016-11-09 16:13 ` [PATCH v2 03/28] i.MX: Add DEBUG_LL hooks for VF610 Andrey Smirnov
2016-11-09 16:13 ` [PATCH v2 04/28] i.MX: scripts: Add "vf610" soc to imx-image Andrey Smirnov
2016-11-09 16:13 ` [PATCH v2 05/28] i.MX: Add support for VF610 Tower board Andrey Smirnov
2016-11-09 16:13 ` [PATCH v2 06/28] pinctrl: Add provisions to control GPIO pin direction Andrey Smirnov
2016-11-09 16:13 ` [PATCH v2 07/28] i.MX: Add pinctrl driver for VF610 Andrey Smirnov
2016-11-09 16:13 ` [PATCH v2 08/28] clk: Port clock dependency resolution code Andrey Smirnov
2016-11-09 16:13 ` [PATCH v2 09/28] clk: Port of_clk_set_defaults() Andrey Smirnov
2016-11-15 7:53 ` Sascha Hauer
2016-11-09 16:13 ` [PATCH v2 10/28] i.MX: Move clk code from 'mach-imx' to 'drivers' Andrey Smirnov
2016-11-09 16:13 ` [PATCH v2 11/28] i.MX: clk: Port imx_clk_gate2_cgr() Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 12/28] i.MX: clk: Add IMX_PLLV3_USB_VF610 support Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 13/28] i.MX: clk: Port imx_check_clocks() Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 14/28] i.MX: clk: Port imx_clk_mux_flags from Linux Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 15/28] i.MX: Add VF610 clock tree initialization code Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 16/28] vf610: Give enet_osc explicit "enet_ext" name Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 17/28] i.MX: Add 'lpuart' serial driver Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 18/28] i.MX: i2c: Use read/write adapter functions Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 19/28] i.MX: i2c: Add Vybrid support Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 20/28] i.MX: esdhc: Do not rely on CPU type for quirks Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 21/28] i.MX: esdhc: Request "per" clock explicitly Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 22/28] i.MX: Kconfig: Enable OCOTP on Vybrid Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 23/28] i.MX: ocotp: Remove unused #define Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 24/28] i.MX: ocotp: Account for shadow memory gaps Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 25/28] i.MX: ocotp: Add Vybrid support Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 26/28] i.MX: fec: Enable all clocks specified for FEC Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 27/28] i.MX: fec: Add support for Vybrid variant Andrey Smirnov
2016-11-09 16:14 ` [PATCH v2 28/28] gpio: Add GPIO driver for Vybrid Andrey Smirnov
2016-11-11 8:21 ` [PATCH v2 00/28] Vybrid support in Barebox Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478708056-7875-1-git-send-email-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox