From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 16/16] i.MX: imx-usb-misc: Add Vybrid support
Date: Mon, 5 Dec 2016 06:54:44 -0800 [thread overview]
Message-ID: <1480949684-18520-17-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1480949684-18520-1-git-send-email-andrew.smirnov@gmail.com>
Add code to do usbmisc initialization on VF610 family of SoCs. Based on
analogous code from Linux kernel.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/usb/imx/imx-usb-misc.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/usb/imx/imx-usb-misc.c b/drivers/usb/imx/imx-usb-misc.c
index 7c18ca2..9cae440 100644
--- a/drivers/usb/imx/imx-usb-misc.c
+++ b/drivers/usb/imx/imx-usb-misc.c
@@ -422,6 +422,28 @@ static __maybe_unused struct imx_usb_misc_data mx6_data = {
.post_init = mx6_post_init,
};
+#define VF610_OVER_CUR_DIS BIT(7)
+
+static __maybe_unused int vf610_initialize_usb_hw(void __iomem *base, int port,
+ unsigned int flags)
+{
+ u32 reg;
+
+ if (port >= 1)
+ return -EINVAL;
+
+ if (flags & MXC_EHCI_DISABLE_OVERCURRENT) {
+ reg = readl(base);
+ writel(reg | VF610_OVER_CUR_DIS, base);
+ }
+
+ return 0;
+}
+
+static __maybe_unused struct imx_usb_misc_data vf610_data = {
+ .init = vf610_initialize_usb_hw,
+};
+
static struct platform_device_id imx_usbmisc_ids[] = {
#ifdef CONFIG_ARCH_IMX25
{
@@ -519,6 +541,12 @@ static __maybe_unused struct of_device_id imx_usbmisc_dt_ids[] = {
.data = &mx6_data,
},
#endif
+#ifdef CONFIG_ARCH_VF610
+ {
+ .compatible = "fsl,vf610-usbmisc",
+ .data = &vf610_data,
+ },
+#endif
{
/* sentinel */
},
--
2.5.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2016-12-05 14:55 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 14:54 [PATCH 00/16] Vybrid related patches Andrey Smirnov
2016-12-05 14:54 ` [PATCH 01/16] i.MX: esdhc: Enable host->clk during initialization Andrey Smirnov
2016-12-05 14:54 ` [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses Andrey Smirnov
2016-12-05 15:14 ` Stefan Lengfeld
2016-12-06 14:48 ` Andrey Smirnov
2016-12-07 8:51 ` Stefan Lengfeld
2016-12-07 19:13 ` Sascha Hauer
2016-12-07 19:36 ` Andrey Smirnov
2016-12-07 20:57 ` Sascha Hauer
2016-12-07 19:32 ` Andrey Smirnov
2016-12-05 14:54 ` [PATCH 03/16] i.MX: ocotp: Initialize OCOTP as early as possible Andrey Smirnov
2016-12-05 14:54 ` [PATCH 04/16] i.MX: ocotp: Initialize 'sense_enable' to true on Vybrid Andrey Smirnov
2016-12-05 14:54 ` [PATCH 05/16] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype Andrey Smirnov
2016-12-05 14:54 ` [PATCH 06/16] i.MX: vf610: Ramp CPU clock to maximum frequency Andrey Smirnov
2016-12-07 19:27 ` Sascha Hauer
2016-12-12 5:24 ` Andrey Smirnov
2016-12-05 14:54 ` [PATCH 07/16] i.MX: iomuxv3: Add low-level pad code to headers Andrey Smirnov
2016-12-05 14:54 ` [PATCH 08/16] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values Andrey Smirnov
2016-12-05 14:54 ` [PATCH 09/16] i.MX: iomuxv3: Add low-level pad configuration routine Andrey Smirnov
2016-12-05 14:54 ` [PATCH 10/16] i.MX6: sabresd: Remove magic numbers in setup_uart Andrey Smirnov
2016-12-05 14:54 ` [PATCH 11/16] i.MX: iomuxv3: Use helper functions in iomux-v3.h Andrey Smirnov
2016-12-05 14:54 ` [PATCH 12/16] i.MX: vf610: Add low-level pin configuration helper Andrey Smirnov
2016-12-05 14:54 ` [PATCH 13/16] i.MX: iomux-vf610: Add missing pad definitions Andrey Smirnov
2016-12-05 14:54 ` [PATCH 14/16] i.MX: imx-usb-phy: Add VF610 OF compatiblity string Andrey Smirnov
2016-12-05 14:54 ` [PATCH 15/16] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid Andrey Smirnov
2016-12-05 14:54 ` Andrey Smirnov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480949684-18520-17-git-send-email-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox