From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses
Date: Mon, 5 Dec 2016 06:54:30 -0800 [thread overview]
Message-ID: <1480949684-18520-3-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1480949684-18520-1-git-send-email-andrew.smirnov@gmail.com>
i.MX SoC variants like Vybrid have more than one built-in Ethernet
interface and as a consequence support storing more than one MAC address
in OCOTP module. Add 'mac_idx' variable to allow to select which mac
address is being referred to by 'mac_addr' variable and the code to
handle it appropriately.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/mach-imx/ocotp.c | 50 +++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 46 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-imx/ocotp.c b/arch/arm/mach-imx/ocotp.c
index 68ff0ce..9a07922 100644
--- a/arch/arm/mach-imx/ocotp.c
+++ b/arch/arm/mach-imx/ocotp.c
@@ -69,12 +69,16 @@
/* Other definitions */
#define IMX6_OTP_DATA_ERROR_VAL 0xBADABADA
#define DEF_RELAX 20
-#define MAC_OFFSET (0x22 * 4)
+#define MAC_OFFSET_0 (0x22 * 4)
+#define MAC_OFFSET_1 (0x24 * 4)
+#define MAX_MAC_OFFSETS 2
#define MAC_BYTES 8
struct imx_ocotp_data {
int num_regs;
u32 (*addr_to_offset)(u32 addr);
+ u8 mac_offsets[MAX_MAC_OFFSETS];
+ u8 mac_offsets_num;
};
struct ocotp_priv {
@@ -87,6 +91,7 @@ struct ocotp_priv {
char ethaddr[6];
struct regmap_config map_config;
const struct imx_ocotp_data *data;
+ int mac_offset_idx;
};
static struct ocotp_priv *imx_ocotp;
@@ -402,8 +407,10 @@ static int imx_ocotp_get_mac(struct param_d *param, void *priv)
struct ocotp_priv *ocotp_priv = priv;
char buf[8];
int i, ret;
+ u8 mac_offset;
- ret = regmap_bulk_read(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
+ mac_offset = ocotp_priv->data->mac_offsets[ocotp_priv->mac_offset_idx];
+ ret = regmap_bulk_read(ocotp_priv->map, mac_offset, buf, MAC_BYTES);
if (ret < 0)
return ret;
@@ -418,18 +425,43 @@ static int imx_ocotp_set_mac(struct param_d *param, void *priv)
struct ocotp_priv *ocotp_priv = priv;
char buf[8];
int i, ret;
+ u8 mac_offset;
+
+ mac_offset = ocotp_priv->data->mac_offsets[ocotp_priv->mac_offset_idx];
for (i = 0; i < 6; i++)
buf[5 - i] = ocotp_priv->ethaddr[i];
buf[6] = 0; buf[7] = 0;
- ret = regmap_bulk_write(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
+ ret = regmap_bulk_write(ocotp_priv->map, mac_offset, buf, MAC_BYTES);
if (ret < 0)
return ret;
return 0;
}
+static int imx_ocotp_set_mac_idx(struct param_d *param, void *priv)
+{
+ struct ocotp_priv *ocotp_priv = priv;
+ const int min = 0;
+ const int max = ocotp_priv->data->mac_offsets_num - 1;
+ int old, new, ret = 0;
+
+ old = ocotp_priv->mac_offset_idx;
+ new = clamp(old, min, max);
+
+ if (old != new) {
+ dev_err(&ocotp_priv->dev,
+ "%d is out of bounds for '%s', clamping to %d\n",
+ old, param->name, new);
+ ret = -EINVAL;
+ }
+
+ ocotp_priv->mac_offset_idx = new;
+
+ return ret;
+}
+
static struct regmap_bus imx_ocotp_regmap_bus = {
.reg_write = imx_ocotp_reg_write,
.reg_read = imx_ocotp_reg_read,
@@ -486,9 +518,13 @@ static int imx_ocotp_probe(struct device_d *dev)
NULL, NULL, &priv->permanent_write_enable, NULL);
}
- if (IS_ENABLED(CONFIG_NET))
+ if (IS_ENABLED(CONFIG_NET)) {
+ dev_add_param_int(&priv->dev, "mac_idx",
+ imx_ocotp_set_mac_idx, NULL,
+ &priv->mac_offset_idx, "%d", priv);
dev_add_param_mac(&(priv->dev), "mac_addr", imx_ocotp_set_mac,
imx_ocotp_get_mac, priv->ethaddr, priv);
+ }
dev_add_param_bool(&(priv->dev), "sense_enable", NULL, NULL, &priv->sense_enable, priv);
@@ -527,16 +563,22 @@ static u32 vf610_addr_to_offset(u32 addr)
static struct imx_ocotp_data imx6q_ocotp_data = {
.num_regs = 512,
.addr_to_offset = imx6q_addr_to_offset,
+ .mac_offsets_num = 1,
+ .mac_offsets = { MAC_OFFSET_0 },
};
static struct imx_ocotp_data imx6sl_ocotp_data = {
.num_regs = 256,
.addr_to_offset = imx6sl_addr_to_offset,
+ .mac_offsets_num = 1,
+ .mac_offsets = { MAC_OFFSET_0 },
};
static struct imx_ocotp_data vf610_ocotp_data = {
.num_regs = 512,
.addr_to_offset = vf610_addr_to_offset,
+ .mac_offsets_num = 2,
+ .mac_offsets = { MAC_OFFSET_0, MAC_OFFSET_1 },
};
static __maybe_unused struct of_device_id imx_ocotp_dt_ids[] = {
--
2.5.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-12-05 14:55 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 14:54 [PATCH 00/16] Vybrid related patches Andrey Smirnov
2016-12-05 14:54 ` [PATCH 01/16] i.MX: esdhc: Enable host->clk during initialization Andrey Smirnov
2016-12-05 14:54 ` Andrey Smirnov [this message]
2016-12-05 15:14 ` [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses Stefan Lengfeld
2016-12-06 14:48 ` Andrey Smirnov
2016-12-07 8:51 ` Stefan Lengfeld
2016-12-07 19:13 ` Sascha Hauer
2016-12-07 19:36 ` Andrey Smirnov
2016-12-07 20:57 ` Sascha Hauer
2016-12-07 19:32 ` Andrey Smirnov
2016-12-05 14:54 ` [PATCH 03/16] i.MX: ocotp: Initialize OCOTP as early as possible Andrey Smirnov
2016-12-05 14:54 ` [PATCH 04/16] i.MX: ocotp: Initialize 'sense_enable' to true on Vybrid Andrey Smirnov
2016-12-05 14:54 ` [PATCH 05/16] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype Andrey Smirnov
2016-12-05 14:54 ` [PATCH 06/16] i.MX: vf610: Ramp CPU clock to maximum frequency Andrey Smirnov
2016-12-07 19:27 ` Sascha Hauer
2016-12-12 5:24 ` Andrey Smirnov
2016-12-05 14:54 ` [PATCH 07/16] i.MX: iomuxv3: Add low-level pad code to headers Andrey Smirnov
2016-12-05 14:54 ` [PATCH 08/16] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values Andrey Smirnov
2016-12-05 14:54 ` [PATCH 09/16] i.MX: iomuxv3: Add low-level pad configuration routine Andrey Smirnov
2016-12-05 14:54 ` [PATCH 10/16] i.MX6: sabresd: Remove magic numbers in setup_uart Andrey Smirnov
2016-12-05 14:54 ` [PATCH 11/16] i.MX: iomuxv3: Use helper functions in iomux-v3.h Andrey Smirnov
2016-12-05 14:54 ` [PATCH 12/16] i.MX: vf610: Add low-level pin configuration helper Andrey Smirnov
2016-12-05 14:54 ` [PATCH 13/16] i.MX: iomux-vf610: Add missing pad definitions Andrey Smirnov
2016-12-05 14:54 ` [PATCH 14/16] i.MX: imx-usb-phy: Add VF610 OF compatiblity string Andrey Smirnov
2016-12-05 14:54 ` [PATCH 15/16] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid Andrey Smirnov
2016-12-05 14:54 ` [PATCH 16/16] i.MX: imx-usb-misc: Add Vybrid support Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480949684-18520-3-git-send-email-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox