From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 12/21] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values
Date: Mon, 12 Dec 2016 10:02:59 -0800 [thread overview]
Message-ID: <1481565788-9115-13-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1481565788-9115-1-git-send-email-andrew.smirnov@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/mach-imx/include/mach/iomux-v3.h | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/mach-imx/include/mach/iomux-v3.h b/arch/arm/mach-imx/include/mach/iomux-v3.h
index 3bf457f..470f774 100644
--- a/arch/arm/mach-imx/include/mach/iomux-v3.h
+++ b/arch/arm/mach-imx/include/mach/iomux-v3.h
@@ -78,6 +78,22 @@ typedef u64 iomux_v3_cfg_t;
((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
+
+struct iomux_v3_pad_configuration {
+ u64 mux_ctrl_ofs : 12;
+ u64 pad_ctrl_ofs : 12;
+ u64 sel_input_ofs : 12;
+ u64 mux_mode : 5;
+ u64 pad_ctrl : 18;
+ u64 sel_inp : 4;
+ u64 reserved : 1;
+} __packed;
+
+union iomux_v3_pad {
+ iomux_v3_cfg_t raw;
+ struct iomux_v3_pad_configuration cfg;
+};
+
#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
/*
* Use to set PAD control
--
2.5.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-12-12 18:04 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-12 18:02 [PATCH v2 00/21] Vybrid related patches Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 01/21] i.MX: esdhc: Enable host->clk during initialization Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 02/21] i.MX: ocotp: Move memory reversing into a subroutine Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic Andrey Smirnov
2017-01-09 11:18 ` Sascha Hauer
2017-01-09 11:28 ` Sascha Hauer
2017-01-10 15:02 ` Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 04/21] i.MX: ocotp: Add provisions for storing multiple MAC addresses Andrey Smirnov
2016-12-13 9:56 ` Stefan Lengfeld
2016-12-12 18:02 ` [PATCH 05/21] i.MX: ocotp: Initialize OCOTP as early as possible Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 06/21] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 07/21] i.MX: ocotp: Add imx_ocotp_sense_enable() Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 08/21] i.MX: imx6-fusemap: Fix SJC_RESP_LOCK width Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 09/21] i.MX: Add fusemap for VF610 Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 10/21] i.MX: vf610: Ramp CPU clock to maximum frequency Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 11/21] i.MX: iomuxv3: Add low-level pad code to headers Andrey Smirnov
2016-12-12 18:02 ` Andrey Smirnov [this message]
2017-01-09 12:00 ` [PATCH v2 12/21] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values Sascha Hauer
2017-01-10 15:01 ` Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 13/21] i.MX: iomuxv3: Add low-level pad configuration routine Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 14/21] i.MX6: sabresd: Remove magic numbers in setup_uart Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 15/21] i.MX: iomuxv3: Use helper functions in iomux-v3.h Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 16/21] i.MX: vf610: Add low-level pin configuration helper Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 17/21] i.MX: iomux-vf610: Add missing pad definitions Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 18/21] i.MX: imx-usb-phy: Add VF610 OF compatiblity string Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 19/21] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid Andrey Smirnov
2017-01-09 12:03 ` Sascha Hauer
2017-01-10 15:02 ` Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 20/21] i.MX: imx-usb-misc: Add Vybrid support Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 21/21] i.MX: vf610-twr: Remove MSCM setup code Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481565788-9115-13-git-send-email-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox