mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>, s.lengfeld@phytec.de
Subject: [PATCH v2 04/21] i.MX: ocotp: Add provisions for storing multiple MAC addresses
Date: Mon, 12 Dec 2016 10:02:51 -0800	[thread overview]
Message-ID: <1481565788-9115-5-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1481565788-9115-1-git-send-email-andrew.smirnov@gmail.com>

i.MX SoC variants like Vybrid have more than one built-in Ethernet
interface and as a consequence support storing more than one MAC address
in OCOTP module. Add code to create multiple 'mac_addr<n>' parameters as
well as 'mac_addr' as an "alias" to 'mac_addr0' for backwards
compatibility.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 arch/arm/mach-imx/ocotp.c | 65 +++++++++++++++++++++++++++++++++++------------
 1 file changed, 49 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-imx/ocotp.c b/arch/arm/mach-imx/ocotp.c
index f549c94..55bbbb7 100644
--- a/arch/arm/mach-imx/ocotp.c
+++ b/arch/arm/mach-imx/ocotp.c
@@ -69,12 +69,22 @@
 /* Other definitions */
 #define IMX6_OTP_DATA_ERROR_VAL		0xBADABADA
 #define DEF_RELAX			20
-#define MAC_OFFSET			(0x22 * 4)
+#define MAC_OFFSET_0			(0x22 * 4)
+#define MAC_OFFSET_1			(0x24 * 4)
+#define MAX_MAC_OFFSETS			2
 #define MAC_BYTES			8
 
 struct imx_ocotp_data {
 	int num_regs;
 	u32 (*addr_to_offset)(u32 addr);
+	u8  mac_offsets[MAX_MAC_OFFSETS];
+	u8  mac_offsets_num;
+};
+
+struct ocotp_priv_ethaddr {
+	char value[MAC_BYTES];
+	struct regmap *map;
+	u8 offset;
 };
 
 struct ocotp_priv {
@@ -84,9 +94,10 @@ struct ocotp_priv {
 	struct device_d dev;
 	int permanent_write_enable;
 	int sense_enable;
-	char ethaddr[MAC_BYTES];
+	struct ocotp_priv_ethaddr ethaddr[MAX_MAC_OFFSETS];
 	struct regmap_config map_config;
 	const struct imx_ocotp_data *data;
+	int  mac_offset_idx;
 };
 
 static struct ocotp_priv *imx_ocotp;
@@ -408,31 +419,28 @@ static void memreverse(void *dest, const void *src, size_t n)
 
 static int imx_ocotp_get_mac(struct param_d *param, void *priv)
 {
-	struct ocotp_priv *ocotp_priv = priv;
 	char buf[MAC_BYTES];
 	int ret;
+	struct ocotp_priv_ethaddr *ethaddr = priv;
 
-	ret = regmap_bulk_read(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
+	ret = regmap_bulk_read(ethaddr->map, ethaddr->offset,
+			       buf, MAC_BYTES);
 	if (ret < 0)
 		return ret;
 
-	memreverse(ocotp_priv->ethaddr, buf, MAC_BYTES);
+	memreverse(ethaddr->value, buf, MAC_BYTES);
 	return 0;
 }
 
 static int imx_ocotp_set_mac(struct param_d *param, void *priv)
 {
-	struct ocotp_priv *ocotp_priv = priv;
 	char buf[MAC_BYTES];
-	int ret;
+	struct ocotp_priv_ethaddr *ethaddr = priv;
 
-	memreverse(buf, ocotp_priv->ethaddr, MAC_BYTES);
-
-	ret = regmap_bulk_write(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
-	if (ret < 0)
-		return ret;
+	memreverse(buf, ethaddr->value, MAC_BYTES);
 
-	return 0;
+	return regmap_bulk_write(ethaddr->map, ethaddr->offset,
+				 buf, MAC_BYTES);
 }
 
 static struct regmap_bus imx_ocotp_regmap_bus = {
@@ -491,9 +499,28 @@ static int imx_ocotp_probe(struct device_d *dev)
 				NULL, NULL, &priv->permanent_write_enable, NULL);
 	}
 
-	if (IS_ENABLED(CONFIG_NET))
-		dev_add_param_mac(&(priv->dev), "mac_addr", imx_ocotp_set_mac,
-				imx_ocotp_get_mac, priv->ethaddr, priv);
+	if (IS_ENABLED(CONFIG_NET)) {
+		int i;
+		struct ocotp_priv_ethaddr *ethaddr;
+
+		for (i = 0; i < priv->data->mac_offsets_num; i++) {
+			ethaddr = &priv->ethaddr[i];
+			ethaddr->map = priv->map;
+			ethaddr->offset = priv->data->mac_offsets[i];
+
+			dev_add_param_mac(&priv->dev, xasprintf("mac_addr%d", i),
+					  imx_ocotp_set_mac, imx_ocotp_get_mac,
+					  ethaddr->value, ethaddr);
+		}
+
+		/*
+		 * Alias to mac_addr0 for backwards compatibility
+		 */
+		ethaddr = &priv->ethaddr[0];
+		dev_add_param_mac(&priv->dev, "mac_addr",
+				  imx_ocotp_set_mac, imx_ocotp_get_mac,
+				  ethaddr->value, ethaddr);
+	}
 
 	dev_add_param_bool(&(priv->dev), "sense_enable", NULL, NULL, &priv->sense_enable, priv);
 
@@ -532,16 +559,22 @@ static u32 vf610_addr_to_offset(u32 addr)
 static struct imx_ocotp_data imx6q_ocotp_data = {
 	.num_regs = 512,
 	.addr_to_offset = imx6q_addr_to_offset,
+	.mac_offsets_num = 1,
+	.mac_offsets = { MAC_OFFSET_0 },
 };
 
 static struct imx_ocotp_data imx6sl_ocotp_data = {
 	.num_regs = 256,
 	.addr_to_offset = imx6sl_addr_to_offset,
+	.mac_offsets_num = 1,
+	.mac_offsets = { MAC_OFFSET_0 },
 };
 
 static struct imx_ocotp_data vf610_ocotp_data = {
 	.num_regs = 512,
 	.addr_to_offset = vf610_addr_to_offset,
+	.mac_offsets_num = 2,
+	.mac_offsets = { MAC_OFFSET_0, MAC_OFFSET_1 },
 };
 
 static __maybe_unused struct of_device_id imx_ocotp_dt_ids[] = {
-- 
2.5.5


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2016-12-12 18:03 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-12 18:02 [PATCH v2 00/21] Vybrid related patches Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 01/21] i.MX: esdhc: Enable host->clk during initialization Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 02/21] i.MX: ocotp: Move memory reversing into a subroutine Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic Andrey Smirnov
2017-01-09 11:18   ` Sascha Hauer
2017-01-09 11:28     ` Sascha Hauer
2017-01-10 15:02     ` Andrey Smirnov
2016-12-12 18:02 ` Andrey Smirnov [this message]
2016-12-13  9:56   ` [PATCH v2 04/21] i.MX: ocotp: Add provisions for storing multiple MAC addresses Stefan Lengfeld
2016-12-12 18:02 ` [PATCH 05/21] i.MX: ocotp: Initialize OCOTP as early as possible Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 06/21] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 07/21] i.MX: ocotp: Add imx_ocotp_sense_enable() Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 08/21] i.MX: imx6-fusemap: Fix SJC_RESP_LOCK width Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 09/21] i.MX: Add fusemap for VF610 Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 10/21] i.MX: vf610: Ramp CPU clock to maximum frequency Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 11/21] i.MX: iomuxv3: Add low-level pad code to headers Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 12/21] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values Andrey Smirnov
2017-01-09 12:00   ` Sascha Hauer
2017-01-10 15:01     ` Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 13/21] i.MX: iomuxv3: Add low-level pad configuration routine Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 14/21] i.MX6: sabresd: Remove magic numbers in setup_uart Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 15/21] i.MX: iomuxv3: Use helper functions in iomux-v3.h Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 16/21] i.MX: vf610: Add low-level pin configuration helper Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 17/21] i.MX: iomux-vf610: Add missing pad definitions Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 18/21] i.MX: imx-usb-phy: Add VF610 OF compatiblity string Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 19/21] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid Andrey Smirnov
2017-01-09 12:03   ` Sascha Hauer
2017-01-10 15:02     ` Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 20/21] i.MX: imx-usb-misc: Add Vybrid support Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 21/21] i.MX: vf610-twr: Remove MSCM setup code Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1481565788-9115-5-git-send-email-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.lengfeld@phytec.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox