From: Lucas Stach <l.stach@pengutronix.de>
To: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Cc: barebox@lists.infradead.org, Chris.Healy@zii.aero
Subject: Re: [PATCH 5/8] video: tc358767: fix timing calculation
Date: Mon, 03 Jul 2017 11:19:07 +0200 [thread overview]
Message-ID: <1499073547.2308.9.camel@pengutronix.de> (raw)
In-Reply-To: <20170630114304.8070-6-andrey.gusakov@cogentembedded.com>
Am Freitag, den 30.06.2017, 14:43 +0300 schrieb Andrey Gusakov:
> Fields in HTIM01 and HTIM02 regs should be even.
> Recomended thresh_dly value is max_tu_symbol.
> ---
> drivers/video/tc358767.c | 25 +++++++++++++++----------
> 1 file changed, 15 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/video/tc358767.c b/drivers/video/tc358767.c
> index 033da4fb2..d2c94c616 100644
> --- a/drivers/video/tc358767.c
> +++ b/drivers/video/tc358767.c
> @@ -730,13 +730,15 @@ err_dpcd_inval:
> return -EINVAL;
> }
>
> +#define EVEN_HI(val) ((val + 1) & (~0x01))
> +
Please use the commonly used ALIGN instead of defining this on your own.
> static int tc_set_video_mode(struct tc_data *tc, struct fb_videomode *mode)
> {
> int ret;
> int htotal;
> int vtotal;
> int vid_sync_dly;
> - int max_tu_symbol;
> + int max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
>
> htotal = mode->hsync_len + mode->left_margin + mode->xres +
> mode->right_margin;
> @@ -750,14 +752,18 @@ static int tc_set_video_mode(struct tc_data *tc, struct fb_videomode *mode)
> mode->upper_margin, mode->lower_margin, mode->vsync_len);
> dev_dbg(tc->dev, "total: %dx%d\n", htotal, vtotal);
>
> -
> - /* LCD Ctl Frame Size */
> - tc_write(VPCTRL0, (0x40 << 20) /* VSDELAY */ |
> + /*
> + * Datasheet is not clear of vsdelay in case of DPI
> + * assume we do not need any delay when DPI is a source of
> + * sync signals
> + */
> + tc_write(VPCTRL0, (0 << 20) /* VSDELAY */ |
> OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
> - tc_write(HTIM01, (mode->left_margin << 16) | /* H back porch */
> - (mode->hsync_len << 0)); /* Hsync */
> - tc_write(HTIM02, (mode->right_margin << 16) | /* H front porch */
> - (mode->xres << 0)); /* width */
> + /* LCD Ctl Frame Size */
> + tc_write(HTIM01, (EVEN_HI(mode->left_margin) << 16) | /* H back porch */
> + (EVEN_HI(mode->hsync_len) << 0)); /* Hsync */
> + tc_write(HTIM02, (EVEN_HI(mode->right_margin) << 16) | /* H front porch */
> + (EVEN_HI(mode->xres) << 0)); /* width */
> tc_write(VTIM01, (mode->upper_margin << 16) | /* V back porch */
> (mode->vsync_len << 0)); /* Vsync */
> tc_write(VTIM02, (mode->lower_margin << 16) | /* V front porch */
> @@ -776,7 +782,7 @@ static int tc_set_video_mode(struct tc_data *tc, struct fb_videomode *mode)
> /* DP Main Stream Attributes */
> vid_sync_dly = mode->hsync_len + mode->left_margin + mode->xres;
> tc_write(DP0_VIDSYNCDELAY,
> - (0x003e << 16) | /* thresh_dly */
> + (max_tu_symbol << 16) | /* thresh_dly */
> (vid_sync_dly << 0));
>
> tc_write(DP0_TOTALVAL, (vtotal << 16) | (htotal));
> @@ -798,7 +804,6 @@ static int tc_set_video_mode(struct tc_data *tc, struct fb_videomode *mode)
> * (output active video bandwidth in bytes))
> * Must be less than tu_size.
> */
> - max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
> tc_write(DP0_MISC, (max_tu_symbol << 23) | (TU_SIZE_RECOMMENDED << 16) | BPC_8);
>
> return 0;
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-07-03 9:19 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-30 11:42 [PATCH 0/8] video: tc358767: fixes and improvements Andrey Gusakov
2017-06-30 11:42 ` [PATCH 1/8] video: tc358767: do not fail if sink supports more than 2 lanes Andrey Gusakov
2017-06-30 11:42 ` [PATCH 2/8] video: tc358767: support newer DPCD revisions and higher data rates Andrey Gusakov
2017-06-30 11:42 ` [PATCH 3/8] video: tc358767: fix EDID read for DP displays Andrey Gusakov
2017-06-30 11:43 ` [PATCH 4/8] video: tc358767: fix DP0_MISC register set Andrey Gusakov
2017-06-30 11:43 ` [PATCH 5/8] video: tc358767: fix timing calculation Andrey Gusakov
2017-07-03 9:19 ` Lucas Stach [this message]
2017-06-30 11:43 ` [PATCH 6/8] video: tc358767: fix AUXDATAn registers access Andrey Gusakov
2017-07-03 9:22 ` Lucas Stach
2017-06-30 11:43 ` [PATCH 7/8] video: tc358767: filter out modes with too high pixelclock Andrey Gusakov
2017-06-30 11:43 ` [PATCH 8/8] video: tc358767: accept any hsync and vsync polatiry Andrey Gusakov
2017-07-03 9:27 ` [PATCH 0/8] video: tc358767: fixes and improvements Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499073547.2308.9.camel@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=Chris.Healy@zii.aero \
--cc=andrey.gusakov@cogentembedded.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox