From: Lucas Stach <l.stach@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v1 1/2] nvmem: snvs_lpgpr: sync with latest version for kernel
Date: Wed, 05 Jul 2017 12:13:51 +0200 [thread overview]
Message-ID: <1499249631.22075.4.camel@pengutronix.de> (raw)
In-Reply-To: <20170705093301.7411-1-o.rempel@pengutronix.de>
Am Mittwoch, den 05.07.2017, 11:33 +0200 schrieb Oleksij Rempel:
> DT format is ACKed now without "offset" parameter.
> Make sure barebox driver will work with it properly.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> drivers/nvmem/snvs_lpgpr.c | 97 ++++++++++++++++++++++++++++++----------------
> 1 file changed, 64 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/nvmem/snvs_lpgpr.c b/drivers/nvmem/snvs_lpgpr.c
> index 74118a6b75..ac68673bdc 100644
> --- a/drivers/nvmem/snvs_lpgpr.c
> +++ b/drivers/nvmem/snvs_lpgpr.c
> @@ -11,45 +11,71 @@
> #include <init.h>
> #include <io.h>
> #include <of.h>
> +#include <of_device.h>
> #include <malloc.h>
> #include <regmap.h>
> #include <mfd/syscon.h>
> #include <linux/nvmem-provider.h>
>
> +#define IMX6Q_SNVS_HPLR 0x00
> +#define IMX6Q_GPR_SL BIT(5)
> +#define IMX6Q_SNVS_LPLR 0x34
> +#define IMX6Q_GPR_HL BIT(5)
> +#define IMX6Q_SNVS_LPGPR 0x68
> +
> +struct snvs_lpgpr_cfg {
> + int offset;
> + int offset_hplr;
> + int offset_lplr;
> +};
> +
> struct snvs_lpgpr_priv {
> - struct device_d *dev;
> - struct regmap *regmap;
> - int offset;
> - struct nvmem_config cfg;
> + struct device_d *dev;
> + struct regmap *regmap;
> + struct nvmem_config cfg;
> + const struct snvs_lpgpr_cfg *dcfg;
> +};
> +
> +static const struct snvs_lpgpr_cfg snvs_lpgpr_cfg_imx6q = {
> + .offset = IMX6Q_SNVS_LPGPR,
> + .offset_hplr = IMX6Q_SNVS_HPLR,
> + .offset_lplr = IMX6Q_SNVS_LPLR,
> };
>
> -static int snvs_lpgpr_write(struct device_d *dev, const int reg,
> - const void *_val, int bytes)
> +static int snvs_lpgpr_write(struct device_d *dev, const int offset,
> + const void *val, int bytes)
> {
> struct snvs_lpgpr_priv *priv = dev->parent->priv;
> - const u32 *val = _val;
> - int i = 0, words = bytes / 4;
> + const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
> + unsigned int lock_reg;
> + int ret;
>
> - while (words--)
> - regmap_write(priv->regmap, priv->offset + reg + (i++ * 4),
> - *val++);
> + ret = regmap_read(priv->regmap, dcfg->offset_hplr, &lock_reg);
> + if (ret < 0)
> + return ret;
>
> - return 0;
> + if (lock_reg & IMX6Q_GPR_SL)
> + return -EPERM;
> +
> + ret = regmap_read(priv->regmap, dcfg->offset_lplr, &lock_reg);
> + if (ret < 0)
> + return ret;
> +
> + if (lock_reg & IMX6Q_GPR_HL)
> + return -EPERM;
> +
> + return regmap_bulk_write(priv->regmap, dcfg->offset + offset, val,
> + bytes);
> }
>
> -static int snvs_lpgpr_read(struct device_d *dev, const int reg, void *_val,
> - int bytes)
> +static int snvs_lpgpr_read(struct device_d *dev, const int offset, void *val,
> + int bytes)
> {
> struct snvs_lpgpr_priv *priv = dev->parent->priv;
> - u32 *val = _val;
> - int i = 0, words = bytes / 4;
> -
> - while (words--)
> - regmap_read(priv->regmap, priv->offset + reg + (i++ * 4),
> - val++);
> + const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
>
> -
> - return 0;
> + return regmap_bulk_read(priv->regmap, dcfg->offset + offset,
> + val, bytes);
> }
>
> static const struct nvmem_bus snvs_lpgpr_nvmem_bus = {
> @@ -60,10 +86,11 @@ static const struct nvmem_bus snvs_lpgpr_nvmem_bus = {
> static int snvs_lpgpr_probe(struct device_d *dev)
> {
> struct device_node *node = dev->device_node;
> + struct device_node *syscon_node;
> struct snvs_lpgpr_priv *priv;
> struct nvmem_config *cfg;
> + const struct snvs_lpgpr_cfg *dcfg;
No need for this, assing directly to priv->dcfg instead.
> struct nvmem_device *nvmem;
> - int err;
>
> if (!node)
> return -ENOENT;
> @@ -72,15 +99,19 @@ static int snvs_lpgpr_probe(struct device_d *dev)
> if (!priv)
> return -ENOMEM;
>
> - priv->regmap = syscon_node_to_regmap(of_get_parent(node));
> - if (IS_ERR(priv->regmap)) {
> - free(priv);
> + dcfg = of_device_get_match_data(dev);
> + if (!dcfg)
> + return -EINVAL;
> +
> + syscon_node = of_get_parent(node);
> + if (!syscon_node)
> + return -ENODEV;
> +
> + priv->regmap = syscon_node_to_regmap(syscon_node);
> + if (IS_ERR(priv->regmap))
> return PTR_ERR(priv->regmap);
> - }
>
> - err = of_property_read_u32(node, "offset", &priv->offset);
> - if (err)
> - return err;
> + priv->dcfg = dcfg;
>
> cfg = &priv->cfg;
> cfg->name = dev_name(dev);
> @@ -102,13 +133,13 @@ static int snvs_lpgpr_probe(struct device_d *dev)
> }
>
> static __maybe_unused struct of_device_id snvs_lpgpr_dt_ids[] = {
> - { .compatible = "fsl,imx6sl-snvs-lpgpr", },
> - { .compatible = "fsl,imx6q-snvs-lpgpr", },
> + { .compatible = "fsl,imx6q-snvs-lpgpr", .data = &snvs_lpgpr_cfg_imx6q },
> + { .compatible = "fsl,imx6ul-snvs-lpgpr", .data = &snvs_lpgpr_cfg_imx6q },
> { },
> };
>
> static struct driver_d snvs_lpgpr_driver = {
> - .name = "nvmem-snvs-lpgpr",
> + .name = "snvs_lpgpr",
> .probe = snvs_lpgpr_probe,
> .of_compatible = DRV_OF_COMPAT(snvs_lpgpr_dt_ids),
> };
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2017-07-05 10:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-05 9:33 Oleksij Rempel
2017-07-05 9:33 ` [PATCH v1 2/2] dts: arm: imx6qdl: provide snvs-lpgpr device Oleksij Rempel
2017-07-05 10:02 ` Lucas Stach
2017-07-05 10:13 ` Lucas Stach [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499249631.22075.4.camel@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox