From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH v3 7/7] ARM: dts: imx6: phytec: Increase NAND barebox partition size
Date: Wed, 11 Dec 2019 11:59:21 +0100 [thread overview]
Message-ID: <1576061961-153938-7-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1576061961-153938-1-git-send-email-s.riedmueller@phytec.de>
For NAND flash with eraseblock size 1 MB and more the current
barebox partition size is not sufficient. The 4 FCB copies alone occupy
the 4 MB partition size. Increase the partition size to 16 MB to be fit
for the future and leaving some blocks for bad block handling as well.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
Changes in v3:
- Rebased on latest master
---
arch/arm/dts/imx6qdl-phytec-pfla02.dtsi | 6 +++---
arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi | 6 +++---
arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 6 +++---
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
index 846ebbe6b18b..841ad653b26d 100644
--- a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
@@ -98,17 +98,17 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x400000>;
+ reg = <0x0 0x1000000>;
};
partition@400000 {
label = "barebox-environment";
- reg = <0x400000 0x100000>;
+ reg = <0x1000000 0x100000>;
};
partition@500000 {
label = "root";
- reg = <0x500000 0x0>;
+ reg = <0x1100000 0x0>;
};
};
};
diff --git a/arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi
index 892bce1fc0ab..5d287258bb6c 100644
--- a/arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi
@@ -42,17 +42,17 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x400000>;
+ reg = <0x0 0x1000000>;
};
environment_nand: partition@400000 {
label = "barebox-environment";
- reg = <0x400000 0x20000>;
+ reg = <0x1000000 0x100000>;
};
partition@420000 {
label = "root";
- reg = <0x420000 0x0>;
+ reg = <0x1100000 0x0>;
};
};
};
diff --git a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
index 69f252b42382..918b62f794b3 100644
--- a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -50,17 +50,17 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x400000>;
+ reg = <0x0 0x1000000>;
};
partition@400000 {
label = "barebox-environment";
- reg = <0x400000 0x100000>;
+ reg = <0x1000000 0x100000>;
};
partition@500000 {
label = "root";
- reg = <0x500000 0x0>;
+ reg = <0x1100000 0x0>;
};
};
};
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-12-11 10:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 10:59 [PATCH v3 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically Stefan Riedmueller
2019-12-11 10:59 ` [PATCH v3 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description Stefan Riedmueller
2019-12-11 10:59 ` [PATCH v3 3/7] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard Stefan Riedmueller
2019-12-11 10:59 ` [PATCH v3 4/7] ARM: dts: imx6: phycard: Make eeprom configurable Stefan Riedmueller
2019-12-11 10:59 ` [PATCH v3 5/7] ARM: dts: imx6: phycard: Switch to new partitions binding Stefan Riedmueller
2019-12-11 10:59 ` [PATCH v3 6/7] ARM: dts: imx6: phycard: Use gpio binding constants Stefan Riedmueller
2019-12-11 10:59 ` Stefan Riedmueller [this message]
2019-12-12 7:23 ` [PATCH v3 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1576061961-153938-7-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox