[PATCH] ARM: dts: GoMe e143_01: fix default state priorities

[PATCH] ARM: dts: GoMe e143_01: fix default state priorities

[Roland Hieber]

During the initial installation we can forgo writing an initial state
variable set to the eMMC if it is zeroed, and if the default values
priorities are set correctly. Since only the first rootfs partition is
populated during the install process, it should be preferred over the
second rootfs.

Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
 arch/arm/dts/imx7d-gome-e143_01.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/imx7d-gome-e143_01.dts b/arch/arm/dts/imx7d-gome-e143_01.dts
index ea118ddc76f7..ed7f3cfa216b 100644
--- a/arch/arm/dts/imx7d-gome-e143_01.dts
+++ b/arch/arm/dts/imx7d-gome-e143_01.dts
@@ -50,7 +50,7 @@ remaining_attempts@0 {
 				priority@4 {
 					reg = <0x4 0x4>;
 					type = "uint32";
-					default = <10>;
+					default = <20>;
 				};
 			};
 
@@ -67,7 +67,7 @@ remaining_attempts@8 {
 				priority@c {
 					reg = <0xc 0x4>;
 					type = "uint32";
-					default = <20>;
+					default = <10>;
 				};
 			};
 
-- 
2.39.2

Re: [PATCH] ARM: dts: GoMe e143_01: fix default state priorities

[Sascha Hauer]

On Wed, 15 May 2024 15:16:08 +0200, Roland Hieber wrote:
> During the initial installation we can forgo writing an initial state
> variable set to the eMMC if it is zeroed, and if the default values
> priorities are set correctly. Since only the first rootfs partition is
> populated during the install process, it should be preferred over the
> second rootfs.
> 
> 
> [...]

Applied, thanks!

[1/1] ARM: dts: GoMe e143_01: fix default state priorities
      https://git.pengutronix.de/cgit/barebox/commit/?id=a657866d377b (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer@pengutronix.de>