mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 1/3] ARM: wolfvision PF5: Use upstream IO expander dtso
@ 2024-10-01 10:47 Sascha Hauer
  2024-10-01 10:47 ` [PATCH 2/3] ARM: Wolfvision PF5: of_probe only once Sascha Hauer
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Sascha Hauer @ 2024-10-01 10:47 UTC (permalink / raw)
  To: Barebox List; +Cc: Michael Riesch

rk3568-wolfvision-pf5-io-expander-upstream.dtso has been merged in the
upstream dts files, so switch to using the upstream version.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 ...8-wolfvision-pf5-io-expander-upstream.dtso | 137 ------------------
 .../rk3568-wolfvision-pf5-io-expander.dtso    |   2 +-
 2 files changed, 1 insertion(+), 138 deletions(-)
 delete mode 100644 arch/arm/dts/rk3568-wolfvision-pf5-io-expander-upstream.dtso

diff --git a/arch/arm/dts/rk3568-wolfvision-pf5-io-expander-upstream.dtso b/arch/arm/dts/rk3568-wolfvision-pf5-io-expander-upstream.dtso
deleted file mode 100644
index ebcaeafc38..0000000000
--- a/arch/arm/dts/rk3568-wolfvision-pf5-io-expander-upstream.dtso
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device tree overlay for the WolfVision PF5 IO Expander board.
- *
- * Copyright (C) 2024 WolfVision GmbH.
- */
-
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/clock/rk3568-cru.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-
-&{/} {
-	gmac0_clkin: external-gmac0-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-		clock-output-names = "gmac0_clkin";
-		#clock-cells = <0>;
-	};
-
-	usb_host_vbus: usb-host-vbus-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb_host_vbus_en>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v_in>;
-	};
-
-	vcc1v8_eth: vcc1v8-eth-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc1v8_eth_en>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-name = "1v8_eth";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	vcc3v3_eth: vcc3v3-eth-regulator {
-		compatible = "regulator-fixed";
-		enable-active-low;
-		gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc3v3_eth_enn>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-name = "3v3_eth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-};
-
-&gmac0 {
-	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>,
-			  <&cru SCLK_GMAC0>;
-	assigned-clock-parents = <&cru SCLK_GMAC0_RMII_SPEED>,
-				 <&gmac0_clkin>;
-	clock_in_out = "input";
-	phy-handle = <&dp83826>;
-	phy-mode = "rmii";
-	phy-supply = <&vcc3v3_eth>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&gmac0_miim
-		     &gmac0_clkinout
-		     &gmac0_rx_er
-		     &gmac0_rx_bus2
-		     &gmac0_tx_bus2>;
-	status = "okay";
-};
-
-&mdio0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	dp83826: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&eth_wake_intn &eth_phy_rstn>;
-		reset-assert-us = <1000>;
-		reset-deassert-us = <2000>;
-		reset-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
-		wakeup-source;
-	};
-};
-
-&pinctrl {
-	ethernet {
-		eth_wake_intn: eth-wake-intn-pinctrl {
-			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		eth_phy_rstn: eth-phy-rstn-pinctrl {
-			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc1v8_eth_en: vcc1v8-eth-en-pinctrl {
-			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc3v3_eth_enn: vcc3v3-eth-enn-pinctrl {
-			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb {
-		usb_host_vbus_en: usb-host-vbus-en-pinctrl {
-			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&usb_host1_xhci {
-	maximum-speed = "high-speed";
-	phys = <&usb2phy0_host>;
-	phy-names = "usb2-phy";
-	status = "okay";
-};
-
-&usb2phy0_host {
-	phy-supply = <&usb_host_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3568-wolfvision-pf5-io-expander.dtso b/arch/arm/dts/rk3568-wolfvision-pf5-io-expander.dtso
index 37b48afd2d..5160a7ec1a 100644
--- a/arch/arm/dts/rk3568-wolfvision-pf5-io-expander.dtso
+++ b/arch/arm/dts/rk3568-wolfvision-pf5-io-expander.dtso
@@ -8,4 +8,4 @@
 /dts-v1/;
 /plugin/;
 
-#include "rk3568-wolfvision-pf5-io-expander-upstream.dtso"
+#include <arm64/rockchip/rk3568-wolfvision-pf5-io-expander.dtso>
-- 
2.39.5




^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2024-10-02 12:03 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-10-01 10:47 [PATCH 1/3] ARM: wolfvision PF5: Use upstream IO expander dtso Sascha Hauer
2024-10-01 10:47 ` [PATCH 2/3] ARM: Wolfvision PF5: of_probe only once Sascha Hauer
2024-10-01 10:47 ` [PATCH 3/3] ARM: Wolfvision PF5: add display overlay Sascha Hauer
2024-10-02  7:14 ` [PATCH 1/3] ARM: wolfvision PF5: Use upstream IO expander dtso Michael Riesch
2024-10-02 11:58 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox