From: Sascha Hauer <s.hauer@pengutronix.de>
To: "open list:BAREBOX" <barebox@lists.infradead.org>,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: Re: [PATCH v3 00/23] ARM: K3: Add R5 boot support
Date: Tue, 14 Jan 2025 09:32:07 +0100 [thread overview]
Message-ID: <173684352748.2945344.16881117453295684592.b4-ty@pengutronix.de> (raw)
In-Reply-To: <20250113-k3-r5-v3-0-065fcdcc28d3@pengutronix.de>
On Mon, 13 Jan 2025 12:26:47 +0100, Sascha Hauer wrote:
> So far we only supported the TI K3 SoCs booting 2nd stage after U-Boot.
> This series adds full boot support for K3 SoCs, or more specifically,
> the AM625 SoC.
>
>
Applied, thanks!
[01/23] ARM: add ARMv7R MPU support
https://git.pengutronix.de/cgit/barebox/commit/?id=20a8958e0a67 (link may not be stable)
[02/23] lib/rationale: compile for pbl
https://git.pengutronix.de/cgit/barebox/commit/?id=d68c949537f5 (link may not be stable)
[04/23] ARM: move ARM_CPU_PART_* defines to header
https://git.pengutronix.de/cgit/barebox/commit/?id=c27b06e5d318 (link may not be stable)
[05/23] nommu_v7_vectors_init: disable for r5
https://git.pengutronix.de/cgit/barebox/commit/?id=5ccc4e4a21ea (link may not be stable)
[06/23] clocksource: timer-ti-dm: add support for K3 SoCs
https://git.pengutronix.de/cgit/barebox/commit/?id=2b390d5a649f (link may not be stable)
[07/23] ARM: K3: mount /boot even with env handling disabled
https://git.pengutronix.de/cgit/barebox/commit/?id=2aae4a687287 (link may not be stable)
[08/23] clk: add K3 clk driver
https://git.pengutronix.de/cgit/barebox/commit/?id=657d39593b2f (link may not be stable)
[09/23] pmdomain: add K3 driver
https://git.pengutronix.de/cgit/barebox/commit/?id=9f1a0e6e3635 (link may not be stable)
[10/23] rproc: add K3 arm64 rproc driver
https://git.pengutronix.de/cgit/barebox/commit/?id=61f81b932adf (link may not be stable)
[11/23] ARM: k3: add k3_debug_ll_init()
https://git.pengutronix.de/cgit/barebox/commit/?id=bce0ba123e7c (link may not be stable)
[12/23] ARM: K3: use debug_ll code for regular PBL console
https://git.pengutronix.de/cgit/barebox/commit/?id=90cfb1651e5f (link may not be stable)
[13/23] elf: use iomem regions as fallback when loading to non-sdram memory
https://git.pengutronix.de/cgit/barebox/commit/?id=520eb1225c6b (link may not be stable)
[14/23] rproc: add K3 system_controller
https://git.pengutronix.de/cgit/barebox/commit/?id=1bd00031e3c6 (link may not be stable)
[15/23] firmware: ti_sci: add function to get global handle
https://git.pengutronix.de/cgit/barebox/commit/?id=6cbfc1370d28 (link may not be stable)
[16/23] ARM: k3: Add initial r5 support
https://git.pengutronix.de/cgit/barebox/commit/?id=c6840f7a1a48 (link may not be stable)
[17/23] scripts: k3: add script to generate cfg files from yaml
https://git.pengutronix.de/cgit/barebox/commit/?id=de445696adf0 (link may not be stable)
[18/23] ARM: k3: Add k3img tool
https://git.pengutronix.de/cgit/barebox/commit/?id=cf9081dff9fb (link may not be stable)
[19/23] ARM: beagleplay: add Cortex-R5 boot support
https://git.pengutronix.de/cgit/barebox/commit/?id=216fc9b4efaf (link may not be stable)
[20/23] Documentation: add build documentation for TI K3 SoCs
https://git.pengutronix.de/cgit/barebox/commit/?id=32a8e25abea8 (link may not be stable)
[21/23] ARM: am625: disable secondary watchdogs
https://git.pengutronix.de/cgit/barebox/commit/?id=ded22be60797 (link may not be stable)
[22/23] ARM: k3: Add DRAM size detection
https://git.pengutronix.de/cgit/barebox/commit/?id=322380802713 (link may not be stable)
[23/23] ARM: k3: am625-sk board support
https://git.pengutronix.de/cgit/barebox/commit/?id=be8f0946ea1e (link may not be stable)
Best regards,
--
Sascha Hauer <s.hauer@pengutronix.de>
prev parent reply other threads:[~2025-01-14 8:32 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-13 11:26 Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 01/23] ARM: add ARMv7R MPU support Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 02/23] lib/rationale: compile for pbl Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 04/23] ARM: move ARM_CPU_PART_* defines to header Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 05/23] nommu_v7_vectors_init: disable for r5 Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 06/23] clocksource: timer-ti-dm: add support for K3 SoCs Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 07/23] ARM: K3: mount /boot even with env handling disabled Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 08/23] clk: add K3 clk driver Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 09/23] pmdomain: add K3 driver Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 10/23] rproc: add K3 arm64 rproc driver Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 11/23] ARM: k3: add k3_debug_ll_init() Sascha Hauer
2025-01-13 11:26 ` [PATCH v3 12/23] ARM: K3: use debug_ll code for regular PBL console Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 13/23] elf: use iomem regions as fallback when loading to non-sdram memory Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 14/23] rproc: add K3 system_controller Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 15/23] firmware: ti_sci: add function to get global handle Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 16/23] ARM: k3: Add initial r5 support Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 17/23] scripts: k3: add script to generate cfg files from yaml Sascha Hauer
2025-01-14 9:29 ` Ahmad Fatoum
2025-01-14 9:38 ` Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 18/23] ARM: k3: Add k3img tool Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 19/23] ARM: beagleplay: add Cortex-R5 boot support Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 20/23] Documentation: add build documentation for TI K3 SoCs Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 21/23] ARM: am625: disable secondary watchdogs Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 22/23] ARM: k3: Add DRAM size detection Sascha Hauer
2025-01-13 11:27 ` [PATCH v3 23/23] ARM: k3: am625-sk board support Sascha Hauer
2025-01-14 8:32 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=173684352748.2945344.16881117453295684592.b4-ty@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox