[PATCH v2 1/3] aiodev: rockchip_saradc: Add reset control support

[PATCH v2 1/3] aiodev: rockchip_saradc: Add reset control support

[Alexander Shiyan]

This adds reset control support for the Rockchip ADC driver.

Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
---
 drivers/aiodev/rockchip_saradc.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/aiodev/rockchip_saradc.c b/drivers/aiodev/rockchip_saradc.c
index 3c5c0e94da..2e77d79290 100644
--- a/drivers/aiodev/rockchip_saradc.c
+++ b/drivers/aiodev/rockchip_saradc.c
@@ -8,8 +8,9 @@
 
 #include <common.h>
 #include <aiodev.h>
-#include <linux/clk.h>
 #include <regulator.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
 
 #define SARADC_DATA	       0x00
 
@@ -37,6 +38,7 @@ struct rockchip_saradc_data {
 	struct clk *pclk;
 	struct aiodevice aiodev;
 	struct aiochannel *channels;
+	struct reset_control *reset;
 };
 
 static inline void rockchip_saradc_reg_wr(struct rockchip_saradc_data *data,
@@ -51,6 +53,13 @@ static inline u32 rockchip_saradc_reg_rd(struct rockchip_saradc_data *data,
 	return readl(data->base + reg);
 }
 
+static void rockchip_saradc_reset_controller(struct reset_control *reset)
+{
+	reset_control_assert(reset);
+	udelay(20);
+	reset_control_deassert(reset);
+}
+
 static int rockchip_saradc_read(struct aiochannel *chan, int *val)
 {
 	struct rockchip_saradc_data *data;
@@ -163,14 +172,22 @@ static int rockchip_saradc_probe(struct device *dev)
 
 	rockchip_saradc_reg_wr(data, 0, SARADC_CTRL);
 
+	data->reset = reset_control_get(dev, "saradc-apb");
+	if (IS_ERR(data->reset))
+		data->reset = NULL;
+
 	ret = aiodevice_register(&data->aiodev);
 	if (ret)
 		goto fail_channels;
 
+	rockchip_saradc_reset_controller(data->reset);
+
 	dev_info(dev, "registered as %s\n", dev_name(&data->aiodev.dev));
+
 	return 0;
 
 fail_channels:
+	reset_control_put(data->reset);
 	kfree(data->channels);
 	kfree(data->aiodev.channels);
 
-- 
2.38.2

[PATCH v2 2/3] aiodev: rockchip_saradc: Prepare driver to add support for other SARADC variants

[Alexander Shiyan]

Let's make separate hardware-dependent calls to allow adding
different SARADC variants.

Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
---
 drivers/aiodev/rockchip_saradc.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/aiodev/rockchip_saradc.c b/drivers/aiodev/rockchip_saradc.c
index 2e77d79290..aac4a65218 100644
--- a/drivers/aiodev/rockchip_saradc.c
+++ b/drivers/aiodev/rockchip_saradc.c
@@ -24,9 +24,13 @@
 
 #define SARADC_TIMEOUT_NS      (100 * MSECOND)
 
+struct rockchip_saradc_data;
+
 struct rockchip_saradc_cfg {
 	unsigned int num_bits;
 	unsigned int num_channels;
+	void (*init)(struct rockchip_saradc_data *data);
+	int (*read)(struct aiochannel *chan, int *val);
 };
 
 struct rockchip_saradc_data {
@@ -60,7 +64,12 @@ static void rockchip_saradc_reset_controller(struct reset_control *reset)
 	reset_control_deassert(reset);
 }
 
-static int rockchip_saradc_read(struct aiochannel *chan, int *val)
+static void rockchip_saradc_init_v1(struct rockchip_saradc_data *data)
+{
+	rockchip_saradc_reg_wr(data, 0, SARADC_CTRL);
+};
+
+static int rockchip_saradc_read_v1(struct aiochannel *chan, int *val)
 {
 	struct rockchip_saradc_data *data;
 	u32 value = 0;
@@ -103,7 +112,7 @@ static int rockchip_saradc_probe(struct device *dev)
 
 	data->config = device_get_match_data(dev);
 	data->aiodev.hwdev = dev;
-	data->aiodev.read = rockchip_saradc_read;
+	data->aiodev.read = data->config->read;
 
 	data->base = dev_request_mem_region(dev, 0);
 	if (IS_ERR(data->base)) {
@@ -170,7 +179,8 @@ static int rockchip_saradc_probe(struct device *dev)
 		data->channels[i].unit = "mV";
 	}
 
-	rockchip_saradc_reg_wr(data, 0, SARADC_CTRL);
+	if (data->config->init)
+		 data->config->init(data);
 
 	data->reset = reset_control_get(dev, "saradc-apb");
 	if (IS_ERR(data->reset))
@@ -199,6 +209,8 @@ static int rockchip_saradc_probe(struct device *dev)
 static const struct rockchip_saradc_cfg rk3568_saradc_cfg = {
 	.num_bits = 10,
 	.num_channels = 8,
+	.init = rockchip_saradc_init_v1,
+	.read = rockchip_saradc_read_v1,
 };
 
 static const struct of_device_id of_rockchip_saradc_match[] = {
-- 
2.38.2

[PATCH v2 3/3] aiodev: rockchip_saradc: Add support for RK3588

[Alexander Shiyan]

This adds RK3588 SARADC support to the driver.

Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
---
 drivers/aiodev/rockchip_saradc.c | 81 +++++++++++++++++++++++++++-----
 1 file changed, 69 insertions(+), 12 deletions(-)

diff --git a/drivers/aiodev/rockchip_saradc.c b/drivers/aiodev/rockchip_saradc.c
index aac4a65218..152d38ecc5 100644
--- a/drivers/aiodev/rockchip_saradc.c
+++ b/drivers/aiodev/rockchip_saradc.c
@@ -9,18 +9,30 @@
 #include <common.h>
 #include <aiodev.h>
 #include <regulator.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/reset.h>
 
-#define SARADC_DATA	       0x00
-
-#define SARADC_CTRL	       0x08
-#define SARADC_CTRL_IRQ_STATUS (1 << 6)
-#define SARADC_CTRL_IRQ_ENABLE (1 << 5)
-#define SARADC_CTRL_POWER_CTRL (1 << 3)
-#define SARADC_CTRL_CHN_MASK   0x07
-
-#define SARADC_DLY_PU_SOC      0x0c
+/* v1 registers */
+#define SARADC_DATA	    		0x00
+#define SARADC_CTRL			0x08
+#	define SARADC_CTRL_IRQ_STATUS	(1 << 6)
+#	define SARADC_CTRL_IRQ_ENABLE	(1 << 5)
+#	define SARADC_CTRL_POWER_CTRL	(1 << 3)
+#define SARADC_CTRL_CHN_MASK		0x07
+#define SARADC_DLY_PU_SOC		0x0c
+
+/* v2 registers */
+#define SARADC2_CONV_CON		0x000
+#	define SARADC2_CONV_CHANNELS	GENMASK(3, 0)
+#	define SARADC2_START		BIT(4)
+#	define SARADC2_SINGLE_MODE	BIT(5)
+#define SARADC_T_PD_SOC			0x004
+#define SARADC_T_DAS_SOC		0x00c
+#define SARADC2_END_INT_EN		0x104
+#	define SARADC2_EN_END_INT	BIT(0)
+#define SARADC2_END_INT_ST		0x110
+#define SARADC2_DATA_BASE		0x120
 
 #define SARADC_TIMEOUT_NS      (100 * MSECOND)
 
@@ -72,9 +84,7 @@ static void rockchip_saradc_init_v1(struct rockchip_saradc_data *data)
 static int rockchip_saradc_read_v1(struct aiochannel *chan, int *val)
 {
 	struct rockchip_saradc_data *data;
-	u32 value = 0;
-	u32 control = 0;
-	u32 mask;
+	u32 value, control, mask;
 	u64 start;
 
 	data = container_of(chan->aiodev, struct rockchip_saradc_data, aiodev);
@@ -103,6 +113,46 @@ static int rockchip_saradc_read_v1(struct aiochannel *chan, int *val)
 	return 0;
 }
 
+static int rockchip_saradc_read_v2(struct aiochannel *chan, int *val)
+{
+	struct rockchip_saradc_data *data;
+	u32 value, status, mask;
+	u64 start;
+
+	data = container_of(chan->aiodev, struct rockchip_saradc_data, aiodev);
+
+	rockchip_saradc_reset_controller(data->reset);
+
+	rockchip_saradc_reg_wr(data, 0xc, SARADC_T_DAS_SOC);
+	rockchip_saradc_reg_wr(data, 0x20, SARADC_T_PD_SOC);
+	value = FIELD_PREP(SARADC2_EN_END_INT, 1);
+	value |= SARADC2_EN_END_INT << 16;
+	rockchip_saradc_reg_wr(data, value, SARADC2_END_INT_EN);
+	value = FIELD_PREP(SARADC2_START, 1) |
+		FIELD_PREP(SARADC2_SINGLE_MODE, 1) |
+		FIELD_PREP(SARADC2_CONV_CHANNELS, chan->index);
+	value |= (SARADC2_START | SARADC2_SINGLE_MODE | SARADC2_CONV_CHANNELS) << 16;
+	rockchip_saradc_reg_wr(data, value, SARADC2_CONV_CON);
+
+	start = get_time_ns();
+	do {
+		status = rockchip_saradc_reg_rd(data, SARADC2_END_INT_ST);
+
+		if (is_timeout(start, SARADC_TIMEOUT_NS))
+			return -ETIMEDOUT;
+	} while (!(status & SARADC2_EN_END_INT));
+
+	mask = (1 << data->config->num_bits) - 1;
+	value = rockchip_saradc_reg_rd(data, SARADC2_DATA_BASE + chan->index * 4);
+	value &= mask;
+
+	rockchip_saradc_reg_wr(data, SARADC2_EN_END_INT, SARADC2_END_INT_ST);
+
+	*val = (value * data->ref_voltage_mv) / mask;
+
+	return 0;
+}
+
 static int rockchip_saradc_probe(struct device *dev)
 {
 	struct rockchip_saradc_data *data;
@@ -213,8 +263,15 @@ static const struct rockchip_saradc_cfg rk3568_saradc_cfg = {
 	.read = rockchip_saradc_read_v1,
 };
 
+static const struct rockchip_saradc_cfg rk3588_saradc_cfg = {
+	.num_bits = 12,
+	.num_channels = 8,
+	.read = rockchip_saradc_read_v2,
+};
+
 static const struct of_device_id of_rockchip_saradc_match[] = {
 	{ .compatible = "rockchip,rk3568-saradc", .data = &rk3568_saradc_cfg },
+	{ .compatible = "rockchip,rk3588-saradc", .data = &rk3588_saradc_cfg },
 	{ /* end */ }
 };
 MODULE_DEVICE_TABLE(of, of_rockchip_saradc_match);
-- 
2.38.2

Re: [PATCH v2 1/3] aiodev: rockchip_saradc: Add reset control support

[Sascha Hauer]

On Tue, 21 Jan 2025 15:17:58 +0300, Alexander Shiyan wrote:
> This adds reset control support for the Rockchip ADC driver.
> 
> 

Applied, thanks!

[1/3] aiodev: rockchip_saradc: Add reset control support
      https://git.pengutronix.de/cgit/barebox/commit/?id=9a46a5f4c4f0 (link may not be stable)
[2/3] aiodev: rockchip_saradc: Prepare driver to add support for other SARADC variants
      https://git.pengutronix.de/cgit/barebox/commit/?id=7aef44578689 (link may not be stable)
[3/3] aiodev: rockchip_saradc: Add support for RK3588
      https://git.pengutronix.de/cgit/barebox/commit/?id=68f64b4571b8 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer@pengutronix.de>