From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from m12-12.163.com ([220.181.12.12]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jJJmk-0004Dt-IH for barebox@lists.infradead.org; Tue, 31 Mar 2020 16:30:46 +0000 From: youxiaojie Date: Wed, 01 Apr 2020 00:30:14 +0800 Message-ID: <1833400.Y7EmvgfLYE@allan-home> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: bug report: fail to boot barebox in marvell 6281 board To: barebox@lists.infradead.org I ported barebox to a new board similar to guruplug, but it could not boot, only show a line of barebox 2020.03.0-....., and I try official guruplug also stopped. the devicetree is ok under linux 5.4 and the kwbimage.cfg is ok I think, according to the 6281's datasheet and compared with the original register value of machine. so any can try guruplug's barebox? this is my porting patch, is there something wrong? >From f2381a9855ae9db312aed52b1ab4d7343181e3b4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E5=B0=A4=E6=99=93=E6=9D=B0?= Date: Mon, 30 Mar 2020 01:32:31 +0800 Subject: [PATCH] Add support for Huanshuo HS-50A --- arch/arm/boards/Makefile | 1 + arch/arm/boards/huanshuo-hs50a/Makefile | 2 + arch/arm/boards/huanshuo-hs50a/board.c | 17 + arch/arm/boards/huanshuo-hs50a/kwbimage.cfg | 27 ++ arch/arm/boards/huanshuo-hs50a/lowlevel.c | 35 ++ arch/arm/configs/mvebu_defconfig | 1 + arch/arm/dts/Makefile | 1 + arch/arm/dts/kirkwood-huanshuo-hs50a-bb.dts | 16 + arch/arm/mach-mvebu/Kconfig | 4 + dts/src/arm/kirkwood-huanshuo-hs50a.dts | 348 ++++++++++++++++++++ images/Makefile.mvebu | 8 + 11 files changed, 460 insertions(+) create mode 100644 arch/arm/boards/huanshuo-hs50a/Makefile create mode 100644 arch/arm/boards/huanshuo-hs50a/board.c create mode 100644 arch/arm/boards/huanshuo-hs50a/kwbimage.cfg create mode 100644 arch/arm/boards/huanshuo-hs50a/lowlevel.c create mode 100644 arch/arm/dts/kirkwood-huanshuo-hs50a-bb.dts create mode 100644 dts/src/arm/kirkwood-huanshuo-hs50a.dts diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index 9fe458e0a..009dbd801 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_GUF_VINCELL) += guf-vincell/ obj-$(CONFIG_MACH_GW_VENTANA) += gateworks-ventana/ obj-$(CONFIG_MACH_HABA_KNX_LITE) += haba-knx/ obj-$(CONFIG_MACH_HIGHBANK) += highbank/ +obj-$(CONFIG_MACH_HUANSHUO_HS50A) += huanshuo-hs50a/ obj-$(CONFIG_MACH_IMX21ADS) += freescale-mx21-ads/ obj-$(CONFIG_MACH_IMX233_OLINUXINO) += imx233-olinuxino/ obj-$(CONFIG_MACH_IMX27ADS) += freescale-mx27-ads/ diff --git a/arch/arm/boards/huanshuo-hs50a/Makefile b/arch/arm/boards/huanshuo- hs50a/Makefile new file mode 100644 index 000000000..01c7a259e --- /dev/null +++ b/arch/arm/boards/huanshuo-hs50a/Makefile @@ -0,0 +1,2 @@ +obj-y += board.o +lwl-y += lowlevel.o diff --git a/arch/arm/boards/huanshuo-hs50a/board.c b/arch/arm/boards/huanshuo- hs50a/board.c new file mode 100644 index 000000000..9c800c541 --- /dev/null +++ b/arch/arm/boards/huanshuo-hs50a/board.c @@ -0,0 +1,17 @@ +/* + * Copyright + * (C) 2013 Thomas Petazzoni + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +/* empty */ diff --git a/arch/arm/boards/huanshuo-hs50a/kwbimage.cfg b/arch/arm/boards/ huanshuo-hs50a/kwbimage.cfg new file mode 100644 index 000000000..d0f3bdb01 --- /dev/null +++ b/arch/arm/boards/huanshuo-hs50a/kwbimage.cfg @@ -0,0 +1,27 @@ +VERSION 0 +BOOT_FROM nand +NAND_ECCMODE default +NAND_PAGESZ 00000800 +DATA ffd100e0 1b1b9b9b +DATA ffd01400 43000c30 +DATA ffd01404 37543000 +DATA ffd01408 22125451 +DATA ffd0140c 00000a33 +DATA ffd01410 000000cc +DATA ffd01414 00000000 +DATA ffd01418 00000000 +DATA ffd0141c 00000c52 +DATA ffd01420 00000040 +DATA ffd01424 0000f17f +DATA ffd01428 00085520 +DATA ffd0147c 00008552 +DATA ffd01500 00000000 +DATA ffd01504 0ffffff1 +DATA ffd01508 10000000 +DATA ffd0150c 0ffffff5 +DATA ffd01514 00000000 +DATA ffd0151c 00000000 +DATA ffd01494 00030000 +DATA ffd01498 00000000 +DATA ffd0149c 0000e803 +DATA ffd01480 00000001 diff --git a/arch/arm/boards/huanshuo-hs50a/lowlevel.c b/arch/arm/boards/ huanshuo-hs50a/lowlevel.c new file mode 100644 --- /dev/null +++ b/arch/arm/boards/huanshuo-hs50a/lowlevel.c @@ -0,0 +1,35 @@ + * Sebastian Hesselbarth + * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +#include +#include +#include +#include + +extern char __dtb_kirkwood_huanshuo_hs50a_bb_start[]; + +ENTRY_FUNCTION(start_huanshuo_hs50a, r0, r1, r2) +{ + void *fdt; + + arm_cpu_lowlevel_init(); + + fdt = __dtb_kirkwood_huanshuo_hs50a_bb_start + + get_runtime_offset(); + + kirkwood_barebox_entry(fdt); +} diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index c830cf2f0..2aff89a02 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -9,6 +9,7 @@ CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3=y CONFIG_MACH_TURRIS_OMNIA=y CONFIG_MACH_SOLIDRUN_CUBOX=y CONFIG_MACH_GLOBALSCALE_GURUPLUG=y +CONFIG_MACH_HUANSHUO_HS50A=y CONFIG_MACH_PLATHOME_OPENBLOCKS_A6=y CONFIG_MACH_USI_TOPKICK=y CONFIG_AEABI=y diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ddfe64e83..b3bd5cdc4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -30,6 +30,7 @@ lwl-dtb-$(CONFIG_MACH_GRINN_LITEBOARD) += imx6ul- liteboard.dtb.o lwl-dtb-$(CONFIG_MACH_GUF_SANTARO) += imx6q-guf-santaro.dtb.o lwl-dtb-$(CONFIG_MACH_GUF_VINCELL) += imx53-guf-vincell.dtb.o imx53-guf- vincell-lt.dtb.o lwl-dtb-$(CONFIG_MACH_GW_VENTANA) += imx6q-gw54xx.dtb.o +lwl-dtb-$(CONFIG_MACH_HUANSHUO_HS50A) += kirkwood-huanshuo-hs50a-bb.dtb.o lwl-dtb-$(CONFIG_MACH_KONTRON_SAMX6I) += imx6q-samx6i.dtb.o \ imx6dl-samx6i.dtb.o lwl-dtb-$(CONFIG_MACH_LENOVO_IX4_300D) += armada-xp-lenovo-ix4-300d-bb.dtb.o diff --git a/arch/arm/dts/kirkwood-huanshuo-hs50a-bb.dts b/arch/arm/dts/ kirkwood-huanshuo-hs50a-bb.dts new file mode 100644 --- /dev/null +++ b/arch/arm/dts/kirkwood-huanshuo-hs50a-bb.dts @@ -0,0 +1,16 @@ + * Barebox specific DT overlay for HuanShuo HS-50A + * You Xiaojie + */ + gpio-leds { + health-r { + barebox,default-trigger = "heartbeat"; + }; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index bab22f07f..9bd72dddb 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -102,6 +102,10 @@ config MACH_GLOBALSCALE_GURUPLUG bool "Guruplug" select ARCH_KIRKWOOD +config MACH_HUANSHUO_HS50A + bool "Huanshuo HS-50A" + select ARCH_KIRKWOOD + config MACH_PLATHOME_OPENBLOCKS_A6 bool "PlatHome OpenBlocks A6" select ARCH_KIRKWOOD diff --git a/dts/src/arm/kirkwood-huanshuo-hs50a.dts b/dts/src/arm/kirkwood- huanshuo-hs50a.dts new file mode 100644 --- /dev/null +++ b/dts/src/arm/kirkwood-huanshuo-hs50a.dts @@ -0,0 +1,348 @@ +/* Device tree file for the HuanShuo HS-50A box. + * + * Copyright (c) 2019-2020 you_xiaojie + * Based on Marvell RD88F6181 A Board descrition + * Andrew Lunn +*/ + model = "Huanshuo hs-50a"; + compatible = "huanshuo,hs50a","marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; + + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + stdin-path = &uart0; + }; + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + pinctrl-0 = <&pmx_usben>; + pinctrl-names = "default"; + + usb_power: regulator@0 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + compatible = "marvell,dsa"; + #address-cells = <2>; + dsa,ethernet = <ð0port>; + dsa,mii-bus = <&mdio>; + + reg = <10 0>; /* MDIO address 0x0a, switch 0 in tree */ + label = "lan1"; + }; + label = "lan2"; + }; + label = "lan3"; + }; + label = "lan4"; + }; + label = "cpu"; + fixed-link { + &nand { + status = "okay"; + label = "ubi"; + reg = <0x0400000 0x3c00000>; + &mdio { + status = "okay"; + switch0: switch@11 { + status = "okay"; + compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pmx_sw_irq_n>; + pinctrl-names = "default"; + #address-cells = <1>; IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio1>; + interrupt-controller; "lan1"; + phy-handle = <&sw0phy0>; + phy-mode = "rgmii-id"; //optional rgmii is ok + }; "lan2"; + phy-handle = <&sw0phy1>; + phy-mode = "rgmii-id"; //optional rgmii is ok + }; "lan3"; + phy-handle = <&sw0phy2>; + phy-mode = "rgmii-id"; //optional rgmii is ok + }; "lan4"; + phy-handle = <&sw0phy3>; + phy-mode = "rgmii-id"; //optional rgmii is ok + }; + phy-handle = <&sw0phy4>; + phy-mode = "rgmii-id"; //optional rgmii is ok + }; "cpu"; + ethernet = <ð1port>; + phy-mode = "rgmii-id"; //must set, otherwise no rx package + fixed-link { + ethernet = <ð0port>; + phy-mode = "rgmii-id"; //optional, set to rgmii no rx package + fixed-link { + mdio { + #address-cells = <1>; + sw0phy0: switch0phy0@0 { <0 IRQ_TYPE_LEVEL_HIGH>; + }; + sw0phy1: switch0phy1@1 { <1 IRQ_TYPE_LEVEL_HIGH>; + }; + sw0phy2: switch0phy2@2 { <2 IRQ_TYPE_LEVEL_HIGH>; + }; + sw0phy3: switch0phy3@3 { <3 IRQ_TYPE_LEVEL_HIGH>; + }; + sw0phy4: switch0phy4@4 { "ethernet-phy-id0141.0e70"; //, ethernet-phy-ieee802.3-c22"; + reg = <4>; parent = <&switch0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + }; + &pinctrl { + pinctrl-names = "default"; + + pmx_mpps:pmx-mpps { + marvell,pins = "mpp28", "mpp29", "mpp36", "mpp39", "mpp45", "mpp47", "mpp48", "mpp49"; + marvell,function = "gpio"; + }; + pmx_sysrsto_n:pmx-sysrstout-n { + marvell,pins = "mpp6"; + marvell,function = "sysrst"; + }; + pmx_sata1_n:pmx-sata1-act-n { + marvell,pins = "mpp34"; + marvell,function = "sata1"; + }; + pmx_sata0_n:pmx-sata0-act-n { + marvell,pins = "mpp35"; + marvell,function = "sata0"; + }; + pmx_usben:pmx-usb-pwrenable { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_sw_irq_n:pmx-switcher-irq-n { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_fs_n:pmx-fanspeed-n { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_usboc:pmx-usb-pwroc { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_sdwp:pmx-sdio-wp { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_sdcd_n:pmx-sdio-cd-n { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_nfbusy_n:pmx-nfrb { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_mpps:pmx-mpps { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + &gpio0 { + gpio-line-names = "NF_IO2", "NF_IO3", "NF_IO4", "NF_IO5", "NF_IO6", "NF_IO7", "SYSRST_On", "", "TW_SDA", "TW_SCK", "UA0_TXD", "UA0_RXD", "SD_CLK", "SD_CMD", "SD_D0", "SD_D1", "SD_D2", "SD_D3", "NF_IO0", "NF_IO1", "RGMII1_TXD0", "RGMII1_TXD1", "RGMII1_TXD2", "RGMII1_TXD3", "RGMII1_RXD0", "RGMII1_RXD1", "RGMII1_RXD2", "RGMII1_RXD3", "", "", "RGMII1_RXCTL", "RGMII1_RXCLK"; + }; + &gpio1 { + gpio-line-names = "RGMII1_TXCLKOUT", "RGMII1_TXCTL", "SATA1_ACTn", "SATA0_ACTn", "", "USB_EN", "SWITCH_IRQn", "", "FAN_SPEEDn", "USB_OC", "SDWP", "SDCDn", "NFRB", "", "", "", "", ""; + }; + &i2c0 { + status = "okay"; + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + &sdio { + status = "okay"; + pinctrl-0 = <&pmx_sdio &pmx_sdcd_n &pmx_sdwp>; + pinctrl-names = "default"; + cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + &sata { + status = "okay"; + pinctrl-0 = <&pmx_sata0_n &pmx_sata1_n>; + nr-ports = <2>; + }; + &uart0 { + status = "okay"; + &pciec { + status = "okay"; + &pcie0 { + status = "okay"; + compatible = "pci168c,abcd"; + reg = <0x7000 0 0 0 0x1000>; + qca,no-eeprom; + }; + /* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set + * fixed speed and duplex. + ð0 { + status = "okay"; + ð0port { + speed = <1000>; + ð1 { + status = "okay"; + ð1port { + speed = <1000>; diff --git a/images/Makefile.mvebu b/images/Makefile.mvebu index 112227424..2d8f66407 100644 --- a/images/Makefile.mvebu +++ b/images/Makefile.mvebu @@ -110,6 +110,14 @@ pblb-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += start_globalscale_guruplug image-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += barebox-globalscale-guruplug.img image-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += barebox-globalscale- guruplug-2nd.img +HUANSHUO_HS50A_KWBOPTS = ${KWBOPTS} -i $(board)/huanshuo-hs50a/kwbimage.cfg +OPTS_start_huanshuo_hs50a.pblb.kwbimg = $(HUANSHUO_HS50A_KWBOPTS) +FILE_barebox-huanshuo-hs50a.img = start_huanshuo_hs50a.pblb.kwbimg +FILE_barebox-huanshuo-hs50a-2nd.img = start_huanshuo_hs50a.pblb +pblb-$(CONFIG_MACH_HUANSHUO_HS50A) += start_huanshuo_hs50a +image-$(CONFIG_MACH_HUANSHUO_HS50A) += barebox-huanshuo-hs50a.img +image-$(CONFIG_MACH_HUANSHUO_HS50A) += barebox-huanshuo-hs50a-2nd.img + PLATHOME_OPENBLOCKS_A6_KWBOPTS = ${KWBOPTS} -i $(board)/plathome-openblocks- a6/kwbimage.cfg OPTS_start_plathome_openblocks_a6.pblb.kwbimg = $ (PLATHOME_OPENBLOCKS_A6_KWBOPTS) FILE_barebox-plathome-openblocks-a6.img = start_plathome_openblocks_a6.pblb.kwbimg -- 2.26.0.rc2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox