From: "Clément Leger" <cleger@kalray.eu>
To: Sascha Hauer <s.hauer@pengutronix.de>,
Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 5/6] common: bootm: add support for elf file loading
Date: Thu, 23 Apr 2020 08:50:41 +0200 (CEST) [thread overview]
Message-ID: <1950785373.16920857.1587624641555.JavaMail.zimbra@kalray.eu> (raw)
In-Reply-To: <20200422112119.23181-6-cleger@kalray.eu>
----- On 22 Apr, 2020, at 13:21, Clément Leger cleger@kalray.eu wrote:
> This will allows elf loader to directly have an elf file available. Thus
> filetype_elf bootm handlers will be able to use this elf file directly.
>
> Signed-off-by: Clement Leger <cleger@kalray.eu>
> ---
> common/bootm.c | 27 +++++++++++++++++++++++++++
> include/bootm.h | 3 +++
> 2 files changed, 30 insertions(+)
>
> diff --git a/common/bootm.c b/common/bootm.c
> index 366f31455..015d90f3c 100644
> --- a/common/bootm.c
> +++ b/common/bootm.c
> @@ -455,6 +455,8 @@ int bootm_get_os_size(struct image_data *data)
> {
> int ret;
>
> + if (data->elf)
> + return data->elf->high_addr - data->elf->low_addr;
> if (data->os)
> return uimage_get_size(data->os, uimage_part_num(data->os_part));
> if (data->os_fit)
> @@ -502,6 +504,20 @@ static int bootm_open_os_uimage(struct image_data *data)
> return 0;
> }
>
> +static int bootm_open_elf(struct image_data *data)
> +{
> +
> + data->elf = elf_open(data->os_file);
> + if (IS_ERR(data->elf))
> + return PTR_ERR(data->elf);
I just noticed that data->elf should be set to NULL here on error because on
error, the free is done if data->elf != NULL. AFAIK, bootm_open_os_uimage
suffers of the same flaw. Maybe the best place to reset the elf/os members
is in the bootm_boot command in case of error.
> +
> + printf("Entry Point: %08llx\n", data->elf->entry);
> +
> + data->os_address = data->elf->entry;
> +
> + return 0;
> +}
> +
> static void bootm_print_info(struct image_data *data)
> {
> if (data->os_res)
> @@ -636,6 +652,15 @@ int bootm_boot(struct bootm_data *bootm_data)
> }
> }
>
> + if (os_type == filetype_elf) {
> + ret = bootm_open_elf(data);
> + if (ret) {
> + printf("Loading ELF image failed with: %s\n",
> + strerror(-ret));
> + goto err_out;
> + }
> + }
> +
> if (bootm_data->appendroot) {
> char *rootarg;
>
> @@ -705,6 +730,8 @@ err_out:
> uimage_close(data->initrd);
> if (data->os)
> uimage_close(data->os);
> + if (data->elf)
> + elf_close(data->elf);
> if (IS_ENABLED(CONFIG_FITIMAGE) && data->os_fit)
> fit_close(data->os_fit);
> if (data->of_root_node && data->of_root_node != of_get_root_node())
> diff --git a/include/bootm.h b/include/bootm.h
> index 7782de7a4..ef5148f31 100644
> --- a/include/bootm.h
> +++ b/include/bootm.h
> @@ -46,6 +46,9 @@ struct image_data {
> /* if os is an uImage this will be provided */
> struct uimage_handle *os;
>
> + /* if os is an elf file this will be provided */
> + struct elf_image *elf;
> +
> /* if os is a FIT image this will be provided */
> struct fit_handle *os_fit;
>
> --
> 2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-04-23 6:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-22 11:21 [PATCH 0/6] elf: add better bootm support Clement Leger
2020-04-22 11:21 ` [PATCH 1/6] common: elf: add computation of elf boundaries Clement Leger
2020-04-22 11:21 ` [PATCH 2/6] common: elf: fix warning on 32 bits architectures Clement Leger
2020-04-22 11:21 ` [PATCH 3/6] common: elf: split init to be reused from other function Clement Leger
2020-04-22 11:21 ` [PATCH 4/6] common: elf: add elf_open and elf_close Clement Leger
2020-04-23 6:56 ` Sascha Hauer
2020-04-22 11:21 ` [PATCH 5/6] common: bootm: add support for elf file loading Clement Leger
2020-04-23 6:50 ` Clément Leger [this message]
2020-04-23 7:04 ` Sascha Hauer
2020-04-22 11:21 ` [PATCH 6/6] mips: lib: bootm: use new data->elf member Clement Leger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1950785373.16920857.1587624641555.JavaMail.zimbra@kalray.eu \
--to=cleger@kalray.eu \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox