mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Matthias Kaehlcke <matthias@kaehlcke.net>
To: barebox@lists.infradead.org
Subject: [PATCH 0/5] Add support for EDB93xx boards
Date: Sun, 10 Jan 2010 00:28:38 +0100	[thread overview]
Message-ID: <20100109232838.GB14051@darwin> (raw)

Add support for the following Cirrus Logic EDB93xx boards:

EDB9301
EDB9302
EDB9302A
EDB9307
EDB9307A
EDB93012
EDB9315
EDB9315A

This patchset has been tested on boards based on the EDB9301 and EDB9307A designs

Matthias Kaehlcke (5):
  ARM: Add support for EP93xx SoCs
  Add EP93xx ethernet driver
  Add support for EP9xx GPIOs
  Add PrimeCell PL010 serial driver
  Add support for EDB93xx boards

 Documentation/boards.dox                        |    8 +
 MAINTAINERS                                     |   11 +
 arch/arm/Kconfig                                |    6 +
 arch/arm/Makefile                               |    9 +
 arch/arm/configs/edb93xx_defconfig              |  237 ++++++++
 arch/arm/mach-ep93xx/Kconfig                    |  446 +++++++++++++++
 arch/arm/mach-ep93xx/Makefile                   |    3 +
 arch/arm/mach-ep93xx/clocksource.c              |   96 ++++
 arch/arm/mach-ep93xx/gpio.c                     |  136 +++++
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  600 ++++++++++++++++++++
 arch/arm/mach-ep93xx/include/mach/gpio.h        |   29 +
 arch/arm/mach-ep93xx/led.c                      |   62 ++
 arch/arm/mach-ep93xx/led.h                      |   26 +
 arch/arm/mach-ep93xx/lowlevel_init.S            |   64 +++
 board/edb93xx/Makefile                          |    4 +
 board/edb93xx/barebox.lds.S                     |   79 +++
 board/edb93xx/config.h                          |    4 +
 board/edb93xx/early_udelay.h                    |   34 ++
 board/edb93xx/edb93xx.c                         |  172 ++++++
 board/edb93xx/edb93xx.dox                       |  108 ++++
 board/edb93xx/edb93xx.h                         |   48 ++
 board/edb93xx/env/bin/boot                      |   48 ++
 board/edb93xx/env/bin/flash_partition           |   22 +
 board/edb93xx/env/bin/init                      |   19 +
 board/edb93xx/env/bin/set_nor_parts             |    3 +
 board/edb93xx/env/bin/update_kernel             |   16 +
 board/edb93xx/env/bin/update_rootfs             |   16 +
 board/edb93xx/env/config                        |   16 +
 board/edb93xx/flash_cfg.c                       |   38 ++
 board/edb93xx/pll_cfg.c                         |   58 ++
 board/edb93xx/pll_cfg.h                         |   72 +++
 board/edb93xx/sdram_cfg.c                       |  127 +++++
 board/edb93xx/sdram_cfg.h                       |  144 +++++
 drivers/net/Kconfig                             |    5 +
 drivers/net/Makefile                            |    1 +
 drivers/net/ep93xx.c                            |  686 +++++++++++++++++++++++
 drivers/net/ep93xx.h                            |  155 +++++
 drivers/serial/Kconfig                          |    7 +
 drivers/serial/Makefile                         |    2 +-
 drivers/serial/serial_pl010.c                   |  172 ++++++
 drivers/serial/serial_pl010.h                   |  100 ++++
 include/common.h                                |    1 +
 42 files changed, 3889 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/configs/edb93xx_defconfig
 create mode 100644 arch/arm/mach-ep93xx/Kconfig
 create mode 100644 arch/arm/mach-ep93xx/Makefile
 create mode 100644 arch/arm/mach-ep93xx/clocksource.c
 create mode 100644 arch/arm/mach-ep93xx/gpio.c
 create mode 100644 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
 create mode 100644 arch/arm/mach-ep93xx/include/mach/gpio.h
 create mode 100644 arch/arm/mach-ep93xx/led.c
 create mode 100644 arch/arm/mach-ep93xx/led.h
 create mode 100644 arch/arm/mach-ep93xx/lowlevel_init.S
 create mode 100644 board/edb93xx/Makefile
 create mode 100644 board/edb93xx/barebox.lds.S
 create mode 100644 board/edb93xx/config.h
 create mode 100644 board/edb93xx/early_udelay.h
 create mode 100644 board/edb93xx/edb93xx.c
 create mode 100644 board/edb93xx/edb93xx.dox
 create mode 100644 board/edb93xx/edb93xx.h
 create mode 100644 board/edb93xx/env/bin/boot
 create mode 100644 board/edb93xx/env/bin/flash_partition
 create mode 100644 board/edb93xx/env/bin/init
 create mode 100644 board/edb93xx/env/bin/set_nor_parts
 create mode 100644 board/edb93xx/env/bin/update_kernel
 create mode 100644 board/edb93xx/env/bin/update_rootfs
 create mode 100644 board/edb93xx/env/config
 create mode 100644 board/edb93xx/flash_cfg.c
 create mode 100644 board/edb93xx/pll_cfg.c
 create mode 100644 board/edb93xx/pll_cfg.h
 create mode 100644 board/edb93xx/sdram_cfg.c
 create mode 100644 board/edb93xx/sdram_cfg.h
 create mode 100644 drivers/net/ep93xx.c
 create mode 100644 drivers/net/ep93xx.h
 create mode 100644 drivers/serial/serial_pl010.c
 create mode 100644 drivers/serial/serial_pl010.h


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2010-01-09 23:33 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-09 23:28 Matthias Kaehlcke [this message]
2010-01-11  9:49 ` Sascha Hauer
2010-01-11 10:37   ` Matthias Kaehlcke
2010-01-11 11:25     ` Sascha Hauer
2010-01-11 21:31       ` [PATCH] Add support for EDB93xx boards [rev2] Matthias Kaehlcke
2010-01-12  9:52         ` Sascha Hauer
2010-01-12 19:30           ` Matthias Kaehlcke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100109232838.GB14051@darwin \
    --to=matthias@kaehlcke.net \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox