mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 0/5] Add support for EDB93xx boards [rev2]
@ 2010-01-12 19:30 Matthias Kaehlcke
  2010-01-14  9:29 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Matthias Kaehlcke @ 2010-01-12 19:30 UTC (permalink / raw)
  To: barebox

Add support for the following Cirrus Logic EDB93xx boards:

EDB9301
EDB9302
EDB9302A
EDB9307
EDB9307A
EDB93012
EDB9315
EDB9315A

This patchset has been tested on boards based on the EDB9301 and
EDB9307A designs

Changes with respect to rev1:

 * use global linker script with EP93xx specific ifdef instead of a
   board specific one
 * eth driver: remove TODO comments about impossible enhancements
 * eth driver: remove MII_STATUS_* and ETH_STATUS_* macros

Matthias Kaehlcke (5):
  ARM: Add support for EP93xx SoCs
  Add EP93xx ethernet driver
  Add support for EP9xx GPIOs
  Add PrimeCell PL010 serial driver
  Add support for EDB93xx boards

 Documentation/boards.dox                        |    8 +
 arch/arm/Kconfig                                |    6 +
 arch/arm/Makefile                               |    9 +
 arch/arm/configs/edb93xx_defconfig              |  236 ++++++++
 arch/arm/lib/barebox.lds.S                      |    5 +
 arch/arm/mach-ep93xx/Kconfig                    |  438 +++++++++++++++
 arch/arm/mach-ep93xx/Makefile                   |    3 +
 arch/arm/mach-ep93xx/clocksource.c              |   96 ++++
 arch/arm/mach-ep93xx/gpio.c                     |  136 +++++
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  600 ++++++++++++++++++++
 arch/arm/mach-ep93xx/include/mach/gpio.h        |   29 +
 arch/arm/mach-ep93xx/led.c                      |   62 ++
 arch/arm/mach-ep93xx/led.h                      |   26 +
 arch/arm/mach-ep93xx/lowlevel_init.S            |   64 +++
 board/edb93xx/Makefile                          |    2 +
 board/edb93xx/config.h                          |    4 +
 board/edb93xx/early_udelay.h                    |   34 ++
 board/edb93xx/edb93xx.c                         |  172 ++++++
 board/edb93xx/edb93xx.dox                       |  108 ++++
 board/edb93xx/edb93xx.h                         |   48 ++
 board/edb93xx/env/bin/boot                      |   48 ++
 board/edb93xx/env/bin/flash_partition           |   22 +
 board/edb93xx/env/bin/init                      |   19 +
 board/edb93xx/env/bin/set_nor_parts             |    3 +
 board/edb93xx/env/bin/update_kernel             |   16 +
 board/edb93xx/env/bin/update_rootfs             |   16 +
 board/edb93xx/env/config                        |   16 +
 board/edb93xx/flash_cfg.c                       |   38 ++
 board/edb93xx/pll_cfg.c                         |   58 ++
 board/edb93xx/pll_cfg.h                         |   72 +++
 board/edb93xx/sdram_cfg.c                       |  127 +++++
 board/edb93xx/sdram_cfg.h                       |  144 +++++
 drivers/net/Kconfig                             |    5 +
 drivers/net/Makefile                            |    1 +
 drivers/net/ep93xx.c                            |  676 +++++++++++++++++++++++
 drivers/net/ep93xx.h                            |  147 +++++
 drivers/serial/Kconfig                          |    7 +
 drivers/serial/Makefile                         |    2 +-
 drivers/serial/serial_pl010.c                   |  172 ++++++
 drivers/serial/serial_pl010.h                   |  100 ++++
 include/common.h                                |    1 +
 41 files changed, 3775 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/configs/edb93xx_defconfig
 create mode 100644 arch/arm/mach-ep93xx/Kconfig
 create mode 100644 arch/arm/mach-ep93xx/Makefile
 create mode 100644 arch/arm/mach-ep93xx/clocksource.c
 create mode 100644 arch/arm/mach-ep93xx/gpio.c
 create mode 100644 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
 create mode 100644 arch/arm/mach-ep93xx/include/mach/gpio.h
 create mode 100644 arch/arm/mach-ep93xx/led.c
 create mode 100644 arch/arm/mach-ep93xx/led.h
 create mode 100644 arch/arm/mach-ep93xx/lowlevel_init.S
 create mode 100644 board/edb93xx/Makefile
 create mode 100644 board/edb93xx/config.h
 create mode 100644 board/edb93xx/early_udelay.h
 create mode 100644 board/edb93xx/edb93xx.c
 create mode 100644 board/edb93xx/edb93xx.dox
 create mode 100644 board/edb93xx/edb93xx.h
 create mode 100644 board/edb93xx/env/bin/boot
 create mode 100644 board/edb93xx/env/bin/flash_partition
 create mode 100644 board/edb93xx/env/bin/init
 create mode 100644 board/edb93xx/env/bin/set_nor_parts
 create mode 100644 board/edb93xx/env/bin/update_kernel
 create mode 100644 board/edb93xx/env/bin/update_rootfs
 create mode 100644 board/edb93xx/env/config
 create mode 100644 board/edb93xx/flash_cfg.c
 create mode 100644 board/edb93xx/pll_cfg.c
 create mode 100644 board/edb93xx/pll_cfg.h
 create mode 100644 board/edb93xx/sdram_cfg.c
 create mode 100644 board/edb93xx/sdram_cfg.h
 create mode 100644 drivers/net/ep93xx.c
 create mode 100644 drivers/net/ep93xx.h
 create mode 100644 drivers/serial/serial_pl010.c
 create mode 100644 drivers/serial/serial_pl010.h


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH 0/5] Add support for EDB93xx boards [rev2]
  2010-01-12 19:30 [PATCH 0/5] Add support for EDB93xx boards [rev2] Matthias Kaehlcke
@ 2010-01-14  9:29 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2010-01-14  9:29 UTC (permalink / raw)
  To: Matthias Kaehlcke; +Cc: barebox

On Tue, Jan 12, 2010 at 08:30:30PM +0100, Matthias Kaehlcke wrote:
> Add support for the following Cirrus Logic EDB93xx boards:
> 
> EDB9301
> EDB9302
> EDB9302A
> EDB9307
> EDB9307A
> EDB93012
> EDB9315
> EDB9315A
> 
> This patchset has been tested on boards based on the EDB9301 and
> EDB9307A designs
> 
> Changes with respect to rev1:
> 
>  * use global linker script with EP93xx specific ifdef instead of a
>    board specific one
>  * eth driver: remove TODO comments about impossible enhancements
>  * eth driver: remove MII_STATUS_* and ETH_STATUS_* macros
> 
> Matthias Kaehlcke (5):
>   ARM: Add support for EP93xx SoCs
>   Add EP93xx ethernet driver
>   Add support for EP9xx GPIOs
>   Add PrimeCell PL010 serial driver
>   Add support for EDB93xx boards

Applied to -next

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2010-01-14  9:29 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-01-12 19:30 [PATCH 0/5] Add support for EDB93xx boards [rev2] Matthias Kaehlcke
2010-01-14  9:29 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox