From: Matthias Kaehlcke <matthias@kaehlcke.net>
To: barebox@lists.infradead.org
Subject: [PATCH] edb93xx: Fix SDRAM precharge
Date: Wed, 24 Feb 2010 20:08:07 +0100 [thread overview]
Message-ID: <20100224190807.GW20201@darwin> (raw)
edb93xx SDRAM initialization: Issue a precharge all command before forcing the
precharge of all SDRAM banks. Write to the SDRAM in order to force a precharge,
reading causes the edb93xx boards to hang
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
---
board/edb93xx/sdram_cfg.c | 21 +++++++++++++++------
1 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/board/edb93xx/sdram_cfg.c b/board/edb93xx/sdram_cfg.c
index 25b214b..3d4fe08 100644
--- a/board/edb93xx/sdram_cfg.c
+++ b/board/edb93xx/sdram_cfg.c
@@ -31,9 +31,9 @@
(SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank | SDRAM_MODE_REG_VAL))
#define PRECHARGE_BANK(bank) (*(volatile uint32_t *) \
- (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank))
+ (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank)) = 0
-static void force_precharge(void);
+static void precharge_all_banks(void);
static void setup_refresh_timer(void);
static void program_mode_registers(void);
@@ -48,7 +48,7 @@ void sdram_cfg(void)
early_udelay(200);
- force_precharge();
+ precharge_all_banks();
setup_refresh_timer();
@@ -58,13 +58,22 @@ void sdram_cfg(void)
writel(GLCONFIG_CKE, &sdram->glconfig);
}
-static void force_precharge(void)
+static void precharge_all_banks(void)
{
+ struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
+
+ /* Issue PRECHARGE ALL commands */
+ writel(GLCONFIG_INIT | GLCONFIG_CKE, &sdram->glconfig);
+
/*
- * Errata most EP93xx revisions say that PRECHARGE ALL isn't always
+ * Errata of most EP93xx revisions say that PRECHARGE ALL isn't always
* issued.
*
- * Do a read from each bank to make sure they're precharged
+ * Cirrus proposes a workaround which consists in performing a read from
+ * each bank to force the precharge. This causes some boards to hang.
+ * Writing to the SDRAM banks instead of reading has the same
+ * side-effect (the SDRAM controller issues the necessary precharges),
+ * but is known to work on all supported boards
*/
PRECHARGE_BANK(0);
--
1.6.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2010-02-24 19:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-24 19:08 Matthias Kaehlcke [this message]
2010-02-26 7:23 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100224190807.GW20201@darwin \
--to=matthias@kaehlcke.net \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox