From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.69 #1 (Red Hat Linux)) id 1Nu659-0000YK-DI for barebox@lists.infradead.org; Tue, 23 Mar 2010 15:31:52 +0000 Date: Tue, 23 Mar 2010 16:31:48 +0100 From: Sascha Hauer Message-ID: <20100323153148.GO2241@pengutronix.de> References: <20100323133217.GA26177@darwin> <20100323142643.GN2241@pengutronix.de> <20100323150915.GB26177@darwin> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20100323150915.GB26177@darwin> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Barebox working on freescale-mx25-3-stack? To: Matthias Kaehlcke Cc: barebox@lists.infradead.org On Tue, Mar 23, 2010 at 04:09:15PM +0100, Matthias Kaehlcke wrote: > hi sascha, > > El Tue, Mar 23, 2010 at 03:26:43PM +0100 Sascha Hauer ha dit: > > > On Tue, Mar 23, 2010 at 02:32:17PM +0100, Matthias Kaehlcke wrote: > > > hi, > > > > > > i'm trying to run barebox on a Freescale i.MX25 3-Stack board. for > > > this purpose i built barebox with the freescale-mx25-3-stack > > > defconfig, using the toolchain provided by the Freescale BSP (i also > > > tried it with a custom one). i then dumped the barebox.bin on a MMC > > > card, plugged the card into the socket of the board and switched the > > > board on, but nothing happened :( > > > > I just checked, it works, but not with the current defconfig. Please > > enable CONFIG_ARCH_IMX_INTERNAL_BOOT to boot from MMC. Note that > > currently the CPLD is not initialised in barebox and so the FEC is not > > working (It is working if barebox runs as a second stage loader after > > Freescales redboot). > > thanks for checking and for your reply > > i enabled CONFIG_ARCH_IMX_INTERNAL_BOOT, but it doesn't work either. i > also tried to start barebox from NAND, but no way :( > > the barebox version is v2010.03.0, i forgot to mention that in my > initial post > > if you can send me the barebox image that works on your board i'll > check if it works on mine, and we'll have some more certainty about > whether there is some obscure problem in my build process or my board > is somehow different to yours I sent the image to you in private. Here are my dip switch settings, I don't know which of them are important: On the baseboard: sw22: 00000000 sw21: 11000000 On the Debug board: sw5 .. SW10: 0 Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox