Re: [PATCH v2] Add support for Eukrea's CPUIMX25

[Sascha Hauer <s.hauer@pengutronix.de>]

On Mon, May 17, 2010 at 11:43:17AM +0200, Eric Bénard wrote:
> From: Eric Benard <eric@eukrea.com>
> 
> This boards integrates 64mB of DDR, a 256MB NAND flash, a RMII Ethernet PHY
> and a i.MX257 CPU.
> 
> Signed-off-by: Eric Bénard <eric@eukrea.com>
> ---
> v2:
> 	- fix GPIO26 handling
> 	- fix trailing whitespace
>  arch/arm/Makefile                           |    1 +
>  arch/arm/configs/eukrea_cpuimx25_defconfig  |  247 +++++++++++++++++++++++
>  arch/arm/mach-imx/Kconfig                   |   10 +
>  board/eukrea_cpuimx25/Makefile              |   24 +++
>  board/eukrea_cpuimx25/config.h              |   27 +++
>  board/eukrea_cpuimx25/env/bin/_update       |   36 ++++
>  board/eukrea_cpuimx25/env/bin/boot          |   53 +++++
>  board/eukrea_cpuimx25/env/bin/hush_hack     |    1 +
>  board/eukrea_cpuimx25/env/bin/init          |   38 ++++
>  board/eukrea_cpuimx25/env/bin/update_kernel |    8 +
>  board/eukrea_cpuimx25/env/bin/update_root   |    8 +
>  board/eukrea_cpuimx25/env/config            |   26 +++
>  board/eukrea_cpuimx25/eukrea_cpuimx25.c     |  280 +++++++++++++++++++++++++++
>  board/eukrea_cpuimx25/lowlevel_init.S       |  135 +++++++++++++
>  14 files changed, 894 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/configs/eukrea_cpuimx25_defconfig
>  create mode 100644 board/eukrea_cpuimx25/Makefile
>  create mode 100644 board/eukrea_cpuimx25/config.h
>  create mode 100644 board/eukrea_cpuimx25/env/bin/_update
>  create mode 100644 board/eukrea_cpuimx25/env/bin/boot
>  create mode 100644 board/eukrea_cpuimx25/env/bin/hush_hack
>  create mode 100644 board/eukrea_cpuimx25/env/bin/init
>  create mode 100644 board/eukrea_cpuimx25/env/bin/update_kernel
>  create mode 100644 board/eukrea_cpuimx25/env/bin/update_root
>  create mode 100644 board/eukrea_cpuimx25/env/config
>  create mode 100644 board/eukrea_cpuimx25/eukrea_cpuimx25.c
>  create mode 100644 board/eukrea_cpuimx25/lowlevel_init.S
> 

[snip]

> diff --git a/board/eukrea_cpuimx25/eukrea_cpuimx25.c b/board/eukrea_cpuimx25/eukrea_cpuimx25.c
> new file mode 100644
> index 0000000..cddba97
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/eukrea_cpuimx25.c
> @@ -0,0 +1,280 @@
> +/*
> + * (C) 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
> + * (c) 2010 Eukrea Electromatique, Eric Bénard <eric@eukrea.com>
> + * 
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <driver.h>
> +#include <environment.h>
> +#include <mach/imx-regs.h>
> +#include <asm/armlinux.h>
> +#include <mach/gpio.h>
> +#include <asm/io.h>
> +#include <asm/mmu.h>
> +
> +#include <partition.h>
> +#include <asm/mach-types.h>
> +#include <mach/imx-nand.h>
> +#include <mach/imxfb.h>
> +#include <fec.h>
> +#include <nand.h>
> +#include <mach/imx-flash-header.h>
> +#include <mach/iomux-mx25.h>
> +
> +extern unsigned long _stext;
> +
> +void __naked __flash_header_start go(void)
> +{
> +	__asm__ __volatile__("b exception_vectors\n");
> +}
> +
> +struct imx_dcd_entry __dcd_entry_0x400 dcd_entry[] = {
> +	{ .ptr_type = 4, .addr = 0xb8001010, .val = 0x00000004, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0x92100000, },
> +	{ .ptr_type = 1, .addr = 0x80000400, .val = 0x12344321, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0xa2100000, },
> +	{ .ptr_type = 4, .addr = 0x80000000, .val = 0x12344321, },
> +	{ .ptr_type = 4, .addr = 0x80000000, .val = 0x12344321, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0xb2100000, },
> +	{ .ptr_type = 1, .addr = 0x80000033, .val = 0xda, },
> +	{ .ptr_type = 1, .addr = 0x81000000, .val = 0xff, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0x82216080, },
> +	{ .ptr_type = 4, .addr = 0xb8001004, .val = 0x00295729, },
> +	{ .ptr_type = 4, .addr = 0x53f80008, .val = 0x20034000, },
> +};
> +
> +#define APP_DEST	0x80000000
> +
> +struct imx_flash_header __flash_header_0x400 eukrea_cpuimx25_header = {
> +	.app_code_jump_vector	= TEXT_BASE + 0x2000,
> +	.app_code_barker	= APP_CODE_BARKER,
> +	.app_code_csf		= 0,
> +	.dcd_ptr_ptr		= TEXT_BASE + 0x400 + offsetof(struct imx_flash_header, dcd),
> +	.super_root_key		= 0,
> +	.dcd			= TEXT_BASE + 0x400 + offsetof(struct imx_flash_header, dcd_barker),
> +	.app_dest		= TEXT_BASE,
> +	.dcd_barker		= DCD_BARKER,
> +	.dcd_block_len		= sizeof(dcd_entry),
> +};
> +
> +extern unsigned long __bss_start;
> +
> +unsigned long __image_len_0x400 barebox_len = 0x40000;
> +
> +static struct fec_platform_data fec_info = {
> +	.xcv_type	= RMII,
> +	.phy_addr	= 1,
> +};
> +
> +static struct device_d fec_dev = {
> +	.name     = "fec_imx",
> +	.map_base = IMX_FEC_BASE,
> +	.platform_data	= &fec_info,
> +};
> +
> +static struct memory_platform_data sdram_pdata = {
> +	.name	= "ram0",
> +	.flags	= DEVFS_RDWR,
> +};
> +
> +static struct device_d sdram0_dev = {
> +	.name     = "mem",
> +	.map_base = IMX_SDRAM_CS0,
> +	.size     = 64 * 1024 * 1024,
> +	.platform_data = &sdram_pdata,
> +};
> +
> +struct imx_nand_platform_data nand_info = {
> +	.width	= 1,
> +	.hw_ecc	= 1,
> +};
> +
> +static struct device_d nand_dev = {
> +	.name     = "imx_nand",
> +	.map_base = IMX_NFC_BASE,
> +	.platform_data	= &nand_info,
> +};
> +
> +static struct imx_fb_videomode imxfb_mode = {
> +	.mode = {
> +		.name		= "CMO-QVGA",
> +		.refresh	= 60,
> +		.xres		= 320,
> +		.yres		= 240,
> +		.pixclock	= KHZ2PICOS(6500),
> +		.hsync_len	= 30,
> +		.left_margin	= 38,
> +		.right_margin	= 20,
> +		.vsync_len	= 3,
> +		.upper_margin	= 15,
> +		.lower_margin	= 4,
> +	},
> +	.pcr		= 0xCAD08B80,
> +	.bpp		= 16,
> +};
> +
> +static struct imx_fb_platform_data eukrea_cpuimx25_fb_data = {
> +	.mode		= &imxfb_mode,
> +	.pwmr		= 0x00A903FF,
> +	.lscr1		= 0x00120300,
> +	.dmacr		= 0x80040060,
> +};
> +
> +
> +static struct device_d imxfb_dev = {
> +	.name		= "imxfb",
> +	.map_base	= 0x53fbc000,
> +	.size		= 0x1000,
> +	.platform_data	= &eukrea_cpuimx25_fb_data,
> +};
> +
> +#ifdef CONFIG_MMU
> +static void eukrea_cpuimx25_mmu_init(void)
> +{
> +	mmu_init();
> +
> +	arm_create_section(0x80000000, 0x80000000, 128, PMD_SECT_DEF_CACHED);
> +	arm_create_section(0x90000000, 0x80000000, 128, PMD_SECT_DEF_UNCACHED);
> +
> +	setup_dma_coherent(0x10000000);
> +
> +	mmu_enable();
> +}
> +#else
> +static void eukrea_cpuimx25_mmu_init(void)
> +{
> +}
> +#endif
> +
> +static struct pad_desc eukrea_cpuimx25_pads[] = {
> +	MX25_PAD_FEC_MDC__MDC,
> +	MX25_PAD_FEC_MDIO__MDIO,
> +	MX25_PAD_FEC_RDATA0__RDATA0,
> +	MX25_PAD_FEC_RDATA1__RDATA1,
> +	MX25_PAD_FEC_RX_DV__RX_DV,
> +	MX25_PAD_FEC_TDATA0__TDATA0,
> +	MX25_PAD_FEC_TDATA1__TDATA1,
> +	MX25_PAD_FEC_TX_CLK__TX_CLK,
> +	MX25_PAD_FEC_TX_EN__TX_EN,
> +	/* UART1 */
> +	MX25_PAD_UART1_RXD__RXD_MUX,
> +	MX25_PAD_UART1_TXD__TXD_MUX,
> +	MX25_PAD_UART1_RTS__RTS,
> +	MX25_PAD_UART1_CTS__CTS,
> +	/* LCDC */
> +	MX25_PAD_LD0__LCDC_LD0,
> +	MX25_PAD_LD1__LCDC_LD1,
> +	MX25_PAD_LD2__LCDC_LD2,
> +	MX25_PAD_LD3__LCDC_LD3,
> +	MX25_PAD_LD4__LCDC_LD4,
> +	MX25_PAD_LD5__LCDC_LD5,
> +	MX25_PAD_LD6__LCDC_LD6,
> +	MX25_PAD_LD7__LCDC_LD7,
> +	MX25_PAD_LD8__LCDC_LD8,
> +	MX25_PAD_LD9__LCDC_LD9,
> +	MX25_PAD_LD10__LCDC_LD10,
> +	MX25_PAD_LD11__LCDC_LD11,
> +	MX25_PAD_LD12__LCDC_LD12,
> +	MX25_PAD_LD13__LCDC_LD13,
> +	MX25_PAD_LD14__LCDC_LD14,
> +	MX25_PAD_LD15__LCDC_LD15,
> +	MX25_PAD_GPIO_E__LCDC_LD16,
> +	MX25_PAD_GPIO_F__LCDC_LD17,
> +	MX25_PAD_LSCLK__LCDC_LSCLK,
> +	MX25_PAD_OE_ACD__LCDC_OE_ACD,
> +	MX25_PAD_VSYNC__LCDC_VSYN,
> +	MX25_PAD_HSYNC__LCDC_HSYN,
> +	/* BACKLIGHT CONTROL */
> +	MX25_PAD_PWM__GPIO26,
> +};
> +
> +#define IOMUXC_BASE_ADDR        0x43FAC000
> +#define GPIO1_BASE_ADDR         0x53FCC000
> +#define GPIO_GDIR               0x04
> +#define GPIO_DR                 0x00

These are not needed anymore.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox