From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1OT9Ke-0005Rm-QK for barebox@lists.infradead.org; Mon, 28 Jun 2010 08:04:45 +0000 Date: Mon, 28 Jun 2010 10:04:42 +0200 From: Sascha Hauer Message-ID: <20100628080442.GH12115@pengutronix.de> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: testing barebox on calao sbc35-a9260 board To: Belisko Marek Cc: barebox@lists.infradead.org Hi Marek, On Fri, Jun 25, 2010 at 11:31:49AM +0200, Belisko Marek wrote: > Hi, > > I have a calao board sbc35-a9260 with u-boot pre-installed on it. > I would like to try barebox running on that board (also make some development). > I build at91sam9260ek_defconfig to try it out. I became to situation > that I don't know how to load image to board :) > > I try via tftp but u-boot automatically try to boot it and I got some > error about magic number. > I think about possibility just download binary to some RAM address and > then use go command in u-boot > to test if barebox binary will work. > > There exist some how-to or example how to do this? It's perfectly fine to start barebox from U-Boot with the 'go' command. Try 'setenv autostart no' in U-Boot to stop U-Boot from autostarting images. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox