From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2010.08.0
Date: Tue, 3 Aug 2010 10:16:15 +0200 [thread overview]
Message-ID: <20100803081615.GL14113@pengutronix.de> (raw)
Hi all,
We have a new release: v2010.08.0. Quite much has happened this time as
the commit log shows. Thanks for all people working on this project.
Sascha
The following changes since commit 0db4be97f2ebd6cedad9c113ca49667c0b1e8d75:
v2010.07.0 (2010-07-03 10:13:42 +0200)
are available in the git repository at:
git://git.pengutronix.de/git/barebox.git ..BRANCH.NOT.VERIFIED..
Baruch Siach (10):
mx25 3ds: fix build failure
mx25: fix typo in imx25-regs.h
mx25 3ds: cleanup lowlevel_init code
mx25: add support for i2c
i2c: add driver for the MC34704 PMIC
mx25 3ds: add support for i2c master and PMIC
mx25 3ds: fix fec initialization
mx25 3ds: fix memory initialization
nand_imx: fix "used uninitialized" warning on mx25
bootz: give a proper error on open() failure
Eric Benard (1):
Add support for Eukrea CPUIMX35
Eric Bénard (3):
fix command loadb
imx-ipu-fb: Add board specific hook to enable display
imx-ipu-fb: do not enable framebuffer on startup
Ivo Clarysse (1):
mx25 3ds: Fix compilation
Sascha Hauer (61):
net: remove need for eth_halt/eth_open
net: Implement a new network stack
remove unused sntp.h
implement dhcp using new network stack
implement tftp using new network stack
implement ping using new network stack
implement nfs using new network stack
net: consider rarp support as outdated. Remove it
network drivers: call net_receive directly instead of NetReceive
net: remove old network stack
rework device parameters
errno: add strings for network related error messages
add netconsole support
net: add dns support
ping: resolv hostnames
Merge branch 'net' into next
pcm037: Add MMU support
bootu: Allow passing in devices as parameter
Allow to merge default environment from more than one directory
include support for a simple pseudo number generator
net: implement random_ether_addr
net: use a random mac address if the current device does not have a valid address
add a generic default environment
pcm038: use generic default env
pcm043: use generic default env
pcm037: use generic default env
pca100: use generic default env
i.MX27: merge iomux pim definitions from kernel
imxfb: Add board specific hook to enable display
imxfb: do not enable framebuffer on startup
memcpy cmd: Do not expect to read/write the whole chunk at once
armlinux: reorder tag setup
remove eco920 board support
usbnet: remove unused dev member in struct usbnet
i.MX serial: Use readl/writel instead of pointer deref
i.MX clocksource: Use readl/writel instead of pointer deref
i.MX27: Add some missing device base addresses
fb: add a usage counter to prevent double enable/disable
ehci: Make has_tt configurable via platform data
ehci: Handle hub port reset properly
usb: Check return value of host controller init
ehci: use is_timeout for timeout instead of udelay counter
ehci: Force a ehci_halt before trying to reset
ehci: remove unused code
add netconsole host script
Merge remote branch 'origin/usb-pu' into next
Merge remote branch 'origin/assorted-pu' into next
tftp: remove unused variables
add progression bar function
cfi flash driver: Use generic progression bar function
tftp: use generic progression bar
tftp: Add push support
nfs: Use generic progression bar
nfs: resend requests after timeout
tftp: update doxygen information
Merge branch 'next'
pca100: update defconfig
pcm037: update defconfig
pcm038: update defconfig
pcm043: update defconfig
Release v2010.08.0
Uwe Kleine-König (2):
trivial: fix typos concerning "hierarchy"
trivial: fix typos concerning "instead"
Documentation/users_manual.dox | 1 +
Doxyfile | 3 +-
Makefile | 17 +-
TODO | 4 +-
arch/arm/Makefile | 2 +-
arch/arm/configs/eukrea_cpuimx35_defconfig | 254 ++++
arch/arm/configs/pca100_defconfig | 32 +-
arch/arm/configs/pcm037_defconfig | 50 +-
arch/arm/configs/pcm038_defconfig | 30 +-
arch/arm/configs/pcm043_defconfig | 39 +-
arch/arm/lib/armlinux.c | 66 +-
arch/arm/mach-at91rm9200/Kconfig | 8 -
arch/arm/mach-imx/Kconfig | 15 +
arch/arm/mach-imx/clocksource.c | 18 +-
arch/arm/mach-imx/include/mach/imx-ipu-fb.h | 2 +
arch/arm/mach-imx/include/mach/imx21-regs.h | 33 -
arch/arm/mach-imx/include/mach/imx25-regs.h | 3 +-
arch/arm/mach-imx/include/mach/imx27-regs.h | 96 +--
arch/arm/mach-imx/include/mach/imxfb.h | 2 +
arch/arm/mach-imx/include/mach/iomux-mx21.h | 121 ++
arch/arm/mach-imx/include/mach/iomux-mx25.h | 4 +-
arch/arm/mach-imx/include/mach/iomux-mx27.h | 204 ++++
arch/arm/mach-imx/include/mach/iomux-mx2x.h | 230 ++++
arch/arm/mach-imx/speed-imx25.c | 5 +
board/eco920/Makefile | 2 -
board/eco920/config.h | 134 ---
board/eco920/config.mk | 1 -
board/eco920/eco920.c | 211 ----
board/eukrea_cpuimx27/eukrea_cpuimx27.c | 3 +-
board/eukrea_cpuimx35/Makefile | 25 +
board/eukrea_cpuimx35/config.h | 23 +
board/{pcm037 => eukrea_cpuimx35}/env/bin/_update | 0
board/eukrea_cpuimx35/env/bin/boot | 52 +
.../{pcm037 => eukrea_cpuimx35}/env/bin/hush_hack | 0
board/{pcm043 => eukrea_cpuimx35}/env/bin/init | 16 +-
board/eukrea_cpuimx35/env/bin/update_kernel | 8 +
board/eukrea_cpuimx35/env/bin/update_root | 8 +
board/eukrea_cpuimx35/env/config | 27 +
board/eukrea_cpuimx35/eukrea_cpuimx35.c | 343 ++++++
board/eukrea_cpuimx35/eukrea_cpuimx35.dox | 4 +
board/eukrea_cpuimx35/flash_header.c | 60 +
board/eukrea_cpuimx35/lowlevel.c | 218 ++++
board/freescale-mx25-3-stack/3stack.c | 84 +-
board/freescale-mx25-3-stack/lowlevel_init.S | 13 +-
board/imx21ads/imx21ads.c | 1 +
board/imx27ads/imx27ads.c | 3 +-
board/pcm037/env/bin/boot | 47 -
board/pcm037/env/bin/init | 37 -
board/pcm037/env/bin/update_root | 16 -
board/pcm037/env/config | 62 +-
board/pcm037/pcm037.c | 31 +
board/pcm038/env/bin/boot | 47 -
board/pcm038/env/bin/update_kernel | 15 -
board/pcm038/env/bin/update_root | 16 -
board/pcm038/env/config | 62 +-
board/pcm038/pcm038.c | 3 +-
board/pcm043/env/bin/_update | 36 -
board/pcm043/env/bin/boot | 47 -
board/pcm043/env/bin/hush_hack | 1 -
board/pcm043/env/bin/update_kernel | 15 -
board/pcm043/env/config | 65 +-
board/phycard-i.MX27/env/bin/_update | 36 -
board/phycard-i.MX27/env/bin/boot | 40 -
board/phycard-i.MX27/env/bin/hush_hack | 1 -
board/phycard-i.MX27/env/bin/init | 37 -
board/phycard-i.MX27/env/bin/update_kernel | 15 -
board/phycard-i.MX27/env/bin/update_root | 16 -
board/phycard-i.MX27/env/config | 57 +-
board/phycard-i.MX27/pca100.c | 3 +-
commands/edit.c | 2 +-
commands/loadb.c | 2 +-
commands/mem.c | 30 +-
commands/net.c | 38 -
common/Kconfig | 4 +-
common/Makefile | 5 +-
common/console.c | 40 +-
common/misc.c | 7 +-
{board/pcm038/env => defaultenv}/bin/_update | 5 +-
defaultenv/bin/boot | 109 ++
{board/pcm038/env => defaultenv}/bin/hush_hack | 0
{board/pcm038/env => defaultenv}/bin/init | 11 +-
{board/pcm037/env => defaultenv}/bin/update_kernel | 2 +-
.../update_root => defaultenv/bin/update_rootfs | 4 +-
drivers/i2c/Kconfig | 3 +
drivers/i2c/Makefile | 1 +
drivers/i2c/mc34704.c | 140 +++
drivers/nand/nand.c | 7 +-
drivers/nand/nand_imx.c | 2 +-
drivers/net/at91_ether.c | 2 +-
drivers/net/cs8900.c | 2 +-
drivers/net/dm9000.c | 2 +-
drivers/net/ep93xx.c | 4 +-
drivers/net/fec_imx.c | 2 +-
drivers/net/fec_mpc5200.c | 2 +-
drivers/net/macb.c | 2 +-
drivers/net/netx_eth.c | 2 +-
drivers/net/smc91111.c | 2 +-
drivers/net/smc911x.c | 2 +-
drivers/net/tap.c | 2 +-
drivers/net/usb/asix.c | 14 +-
drivers/net/usb/usbnet.c | 11 +-
drivers/nor/cfi_flash.c | 5 +-
drivers/serial/serial_imx.c | 137 ++-
drivers/usb/usb.c | 5 +-
drivers/usb/usb_ehci.h | 4 -
drivers/usb/usb_ehci_core.c | 74 +-
drivers/video/fb.c | 26 +-
drivers/video/imx-ipu-fb.c | 10 +-
drivers/video/imx.c | 26 +-
include/console.h | 6 -
include/driver.h | 2 +-
include/fb.h | 6 +-
include/i2c/mc34704.h | 26 +
include/net.h | 473 ++++----
include/param.h | 15 +-
include/progress.h | 15 +
include/stdlib.h | 16 +
include/usb/ehci.h | 10 +
include/usb/usbnet.h | 2 -
lib/Makefile | 2 +
lib/driver.c | 12 +-
lib/parameter.c | 195 ++--
lib/random.c | 26 +
lib/show_progress.c | 62 +
net/Kconfig | 19 +-
net/Makefile | 3 +-
net/dhcp.c | 491 +++-----
net/dns.c | 264 +++++
net/eth.c | 98 +-
net/net.c | 1244 ++++++++------------
net/netconsole.c | 228 ++++
net/nfs.c | 726 ++++++------
net/ping.c | 152 ++--
net/rarp.c | 101 --
net/sntp.h | 61 -
net/tftp.c | 447 +++++---
scripts/genenv | 17 +
scripts/netconsole | 59 +
138 files changed, 5094 insertions(+), 3612 deletions(-)
create mode 100644 arch/arm/configs/eukrea_cpuimx35_defconfig
create mode 100644 arch/arm/mach-imx/include/mach/iomux-mx21.h
create mode 100644 arch/arm/mach-imx/include/mach/iomux-mx27.h
create mode 100644 arch/arm/mach-imx/include/mach/iomux-mx2x.h
delete mode 100644 board/eco920/Makefile
delete mode 100644 board/eco920/config.h
delete mode 100644 board/eco920/config.mk
delete mode 100644 board/eco920/eco920.c
create mode 100644 board/eukrea_cpuimx35/Makefile
create mode 100644 board/eukrea_cpuimx35/config.h
rename board/{pcm037 => eukrea_cpuimx35}/env/bin/_update (100%)
create mode 100644 board/eukrea_cpuimx35/env/bin/boot
rename board/{pcm037 => eukrea_cpuimx35}/env/bin/hush_hack (100%)
rename board/{pcm043 => eukrea_cpuimx35}/env/bin/init (67%)
create mode 100644 board/eukrea_cpuimx35/env/bin/update_kernel
create mode 100644 board/eukrea_cpuimx35/env/bin/update_root
create mode 100644 board/eukrea_cpuimx35/env/config
create mode 100644 board/eukrea_cpuimx35/eukrea_cpuimx35.c
create mode 100644 board/eukrea_cpuimx35/eukrea_cpuimx35.dox
create mode 100644 board/eukrea_cpuimx35/flash_header.c
create mode 100644 board/eukrea_cpuimx35/lowlevel.c
delete mode 100644 board/pcm037/env/bin/boot
delete mode 100644 board/pcm037/env/bin/init
delete mode 100644 board/pcm037/env/bin/update_root
delete mode 100644 board/pcm038/env/bin/boot
delete mode 100644 board/pcm038/env/bin/update_kernel
delete mode 100644 board/pcm038/env/bin/update_root
delete mode 100644 board/pcm043/env/bin/_update
delete mode 100644 board/pcm043/env/bin/boot
delete mode 100644 board/pcm043/env/bin/hush_hack
delete mode 100644 board/pcm043/env/bin/update_kernel
delete mode 100644 board/phycard-i.MX27/env/bin/_update
delete mode 100644 board/phycard-i.MX27/env/bin/boot
delete mode 100644 board/phycard-i.MX27/env/bin/hush_hack
delete mode 100644 board/phycard-i.MX27/env/bin/init
delete mode 100644 board/phycard-i.MX27/env/bin/update_kernel
delete mode 100644 board/phycard-i.MX27/env/bin/update_root
rename {board/pcm038/env => defaultenv}/bin/_update (86%)
create mode 100644 defaultenv/bin/boot
rename {board/pcm038/env => defaultenv}/bin/hush_hack (100%)
rename {board/pcm038/env => defaultenv}/bin/init (59%)
rename {board/pcm037/env => defaultenv}/bin/update_kernel (91%)
rename board/pcm043/env/bin/update_root => defaultenv/bin/update_rootfs (91%)
create mode 100644 drivers/i2c/mc34704.c
create mode 100644 include/i2c/mc34704.h
create mode 100644 include/progress.h
create mode 100644 include/stdlib.h
create mode 100644 include/usb/ehci.h
create mode 100644 lib/random.c
create mode 100644 lib/show_progress.c
create mode 100644 net/dns.c
create mode 100644 net/netconsole.c
delete mode 100644 net/rarp.c
delete mode 100644 net/sntp.h
create mode 100755 scripts/genenv
create mode 100755 scripts/netconsole
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2010-08-03 8:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100803081615.GL14113@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox