From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Eric Bénard" <eric@eukrea.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] cfi_flash_intel: support 1024b buffer write
Date: Wed, 4 Aug 2010 09:42:53 +0200 [thread overview]
Message-ID: <20100804074253.GS14113@pengutronix.de> (raw)
In-Reply-To: <1280483395-9043-1-git-send-email-eric@eukrea.com>
On Fri, Jul 30, 2010 at 11:49:55AM +0200, Eric Bénard wrote:
> newer Numonyx Strataflash P3x have 1024b buffer, thus, it's possible
> to write a buffer size of 0x200 which the actual flash_write_cmd
> doesn't permit as it's limited to a uchar parameter.
So I guess these chips have 16 data lines?
Unfortunately this won't work when two of these are parallel. You'd have
to duplicate the command for the upper 16 bit.
Sascha
>
> Signed-off-by: Eric Bénard <eric@eukrea.com>
> ---
> drivers/nor/cfi_flash.c | 11 +++++++++++
> drivers/nor/cfi_flash.h | 1 +
> drivers/nor/cfi_flash_intel.c | 5 ++++-
> 3 files changed, 16 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/nor/cfi_flash.c b/drivers/nor/cfi_flash.c
> index fa5e5ee..6f45da6 100644
> --- a/drivers/nor/cfi_flash.c
> +++ b/drivers/nor/cfi_flash.c
> @@ -886,6 +886,17 @@ void flash_write_cmd (struct flash_info *info, flash_sect_t sect, uint offset, u
> flash_write_word(info, cword, addr);
> }
>
> +void flash_write_cmd16 (struct flash_info *info, flash_sect_t sect, uint offset, ushort cmd)
> +{
> +
> + uchar *addr;
> + cfiword_t cword;
> +
> + addr = flash_make_addr (info, sect, offset);
> + cword.w = cmd;
> + flash_write_word(info, cword, addr);
> +}
> +
> int flash_isequal (struct flash_info *info, flash_sect_t sect, uint offset, uchar cmd)
> {
> cfiptr_t cptr;
> diff --git a/drivers/nor/cfi_flash.h b/drivers/nor/cfi_flash.h
> index 057e56c..d7e6ea2 100644
> --- a/drivers/nor/cfi_flash.h
> +++ b/drivers/nor/cfi_flash.h
> @@ -189,6 +189,7 @@ extern struct cfi_cmd_set cfi_cmd_set_amd;
>
> int flash_isset (struct flash_info *info, flash_sect_t sect, uint offset, uchar cmd);
> void flash_write_cmd (struct flash_info *info, flash_sect_t sect, uint offset, uchar cmd);
> +void flash_write_cmd16 (struct flash_info * info, flash_sect_t sect, uint offset, ushort cmd);
> flash_sect_t find_sector (struct flash_info *info, ulong addr);
> int flash_status_check (struct flash_info *info, flash_sect_t sector,
> uint64_t tout, char *prompt);
> diff --git a/drivers/nor/cfi_flash_intel.c b/drivers/nor/cfi_flash_intel.c
> index 4344760..96bf33f 100644
> --- a/drivers/nor/cfi_flash_intel.c
> +++ b/drivers/nor/cfi_flash_intel.c
> @@ -71,7 +71,10 @@ static int intel_flash_write_cfibuffer (struct flash_info *info, ulong dest, con
> /* reduce the number of loops by the width of the port */
> cnt = len >> (info->portwidth - 1);
>
> - flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
> + if (cnt >= 0x100)
> + flash_write_cmd16 (info, sector, 0, (ushort) cnt - 1);
> + else
> + flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
> while (cnt-- > 0) {
> if (bankwidth_is_1(info)) {
> *dst.cp++ = *src.cp++;
> --
> 1.6.3.3
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-08-04 7:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-30 9:49 Eric Bénard
2010-08-04 7:42 ` Sascha Hauer [this message]
2010-08-04 7:48 ` Eric Bénard
2010-08-04 8:00 ` Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2010-05-17 16:14 Eric Bénard
2010-05-17 16:19 ` Eric Bénard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100804074253.GS14113@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=eric@eukrea.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox