From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 68.mail-out.ovh.net ([91.121.185.69]) by bombadil.infradead.org with smtp (Exim 4.72 #1 (Red Hat Linux)) id 1Om7L5-00086P-LM for barebox@lists.infradead.org; Thu, 19 Aug 2010 15:47:40 +0000 Date: Thu, 19 Aug 2010 17:42:18 +0200 From: Jean-Christophe PLAGNIOL-VILLARD Message-ID: <20100819154218.GK454@game.jcrosoft.org> References: <20100819024811.GG454@game.jcrosoft.org> <1282186110-32738-2-git-send-email-plagnioj@jcrosoft.com> <20100819065223.GD27749@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20100819065223.GD27749@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 2/6] at91: Introduction of at91sam9261 SOC. To: Sascha Hauer Cc: barebox@lists.infradead.org On 08:52 Thu 19 Aug , Sascha Hauer wrote: > On Thu, Aug 19, 2010 at 04:48:26AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote: > > AT91sam9261 series is an ARM 926ej-s SOC family clocked at 190/100MHz. > > > > The first board that embeds at91sam9261 chip is the AT91SAM9261-EK. > > http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820 > > > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD > > --- > > arch/arm/Makefile | 1 + > > arch/arm/boards/at91sam9261ek/Makefile | 1 + > > arch/arm/boards/at91sam9261ek/config.h | 110 +++++++++ > > arch/arm/boards/at91sam9261ek/env/bin/_update | 36 +++ > > arch/arm/boards/at91sam9261ek/env/bin/boot | 47 ++++ > > arch/arm/boards/at91sam9261ek/env/bin/hush_hack | 1 + > > arch/arm/boards/at91sam9261ek/env/bin/init | 38 +++ > > .../at91sam9261ek/env/bin/update_barebox_xmodem | 26 ++ > > .../arm/boards/at91sam9261ek/env/bin/update_kernel | 15 ++ > > arch/arm/boards/at91sam9261ek/env/bin/update_root | 16 ++ > > arch/arm/boards/at91sam9261ek/env/config | 28 +++ > > Care to use the generic environment? What's missing in it for you to use > it? miss it in the code > > > arch/arm/boards/at91sam9261ek/init.c | 170 ++++++++++++++ > > arch/arm/configs/at91sam9261ek_defconfig | 242 ++++++++++++++++++++ > > arch/arm/mach-at91/Kconfig | 23 ++ > > arch/arm/mach-at91/Makefile | 1 + > > arch/arm/mach-at91/at91sam9261.c | 230 +++++++++++++++++++ > > arch/arm/mach-at91/at91sam9261_devices.c | 169 ++++++++++++++ > > arch/arm/mach-at91/include/mach/at91sam9261.h | 109 +++++++++ > > Can you please make two patches out of this? One for the architecture > support and another one for the board support. Personnaly I prefer to add the first board at the same as e do for the kernel otherwise ok Best Regards, J. _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox