mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: Re: [PATCH 11/17] mci: handle SD cards < 2.0 correctly
Date: Mon, 11 Oct 2010 14:48:43 +0200	[thread overview]
Message-ID: <201010111448.43598.jbe@pengutronix.de> (raw)
In-Reply-To: <1286796505-16049-12-git-send-email-s.hauer@pengutronix.de>

Sascha Hauer wrote:
> With SD cards older than 2.0 the sd_send_if_cond() fails. Do
> not assume it's an MMC card in this case. Instead, assume
> it's a MMC card if sd_send_op_cond() fails.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/mci/mci-core.c |   24 +++++++-----------------
>  1 files changed, 7 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> index a6c81b8..57b82bf 100644
> --- a/drivers/mci/mci-core.c
> +++ b/drivers/mci/mci-core.c
> @@ -1148,26 +1148,16 @@ static int mci_card_probe(struct device_d *mci_dev)
>
>  	/* Check if this card can handle the "SD Card Physical Layer
> Specification 2.0" */ rc = sd_send_if_cond(mci_dev);
> -	if (rc) {
> +	rc = sd_send_op_cond(mci_dev);
> +	if (rc && rc == -ETIMEDOUT) {
>  		/* If the command timed out, we check for an MMC card */
> -		if (rc == -ETIMEDOUT) {
> -			pr_debug("Card seems to be a MultiMediaCard\n");
> -			rc = mmc_send_op_cond(mci_dev);
> -			if (rc) {
> -				pr_err("MultiMediaCard voltage select failed with %d\n", rc);
> -				goto on_error;
> -			}
> -		} else
> -			goto on_error;
> -	} else {
> -		/* Its a 2.xx card. Setup operation conditions */
> -		rc = sd_send_op_cond(mci_dev);
> -		if (rc) {
> -			pr_debug("Cannot setup SD card's operation condition\n");
> -			goto on_error;
> -		}
> +		pr_debug("Card seems to be a MultiMediaCard\n");
> +		rc = mmc_send_op_cond(mci_dev);
>  	}
>
> +	if (rc)
> +		goto on_error;
> +
>  	rc = mci_startup(mci_dev);
>  	if (rc) {
>  		printf("Card's startup fails with %d\n", rc);

Tested-by: Juergen Beisert <jbe@pengutronix.de>

@Marek: You need this patch to make your SD card work on the mini2440.

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2010-10-11 12:50 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-11 11:28 Patches for -next Sascha Hauer
2010-10-11 11:28 ` [PATCH 01/17] i.MX27: Add support for SDHC pins Sascha Hauer
2010-10-11 11:28 ` [PATCH 02/17] mci: Add i.MX esdhc support Sascha Hauer
2010-10-11 11:28 ` [PATCH 03/17] mci: print error code on failure Sascha Hauer
2010-10-11 11:28 ` [PATCH 04/17] spi i.MX: add spi version namespace to register defines Sascha Hauer
2010-10-11 11:28 ` [PATCH 05/17] spi i.MX: redirect functions to version specific functions Sascha Hauer
2010-10-11 11:28 ` [PATCH 06/17] spi i.MX: Add i.MX51 support Sascha Hauer
2010-10-11 11:28 ` [PATCH 07/17] Move mfd drivers to drivers/mfd Sascha Hauer
2010-10-11 11:28 ` [PATCH 08/17] move include files for mfd drivers to include/mfd Sascha Hauer
2010-10-11 11:28 ` [PATCH 09/17] mfd mc13892: Add spi support Sascha Hauer
2010-10-11 11:28 ` [PATCH 10/17] mfd mc13892: support reading the revision Sascha Hauer
2010-10-11 11:28 ` [PATCH 11/17] mci: handle SD cards < 2.0 correctly Sascha Hauer
2010-10-11 12:48   ` Juergen Beisert [this message]
2010-10-11 13:07     ` Belisko Marek
2010-10-11 13:47       ` Juergen Beisert
2010-10-11 12:53   ` Juergen Beisert
2010-10-11 11:28 ` [PATCH 12/17] mci: align write buffer if necessary Sascha Hauer
2010-10-11 11:28 ` [PATCH 13/17] defaultenv: handle disk partitions Sascha Hauer
2010-10-11 12:26   ` Juergen Beisert
2010-10-11 12:50     ` Sascha Hauer
2010-10-11 12:59       ` Juergen Beisert
2010-10-11 13:54         ` Sascha Hauer
2010-10-11 14:22           ` Juergen Beisert
2010-10-12  6:51             ` Jean-Christophe PLAGNIOL-VILLARD
2010-10-11 11:28 ` [PATCH 14/17] imx_serial: Add mx51 support Sascha Hauer
2010-10-11 11:28 ` [PATCH 15/17] ARM mmu: Call __mmu_cache_flush instead of hardcoded v4/v5 only function Sascha Hauer
2010-10-11 11:28 ` [PATCH 16/17] ARM i.MX: Add basic i.MX51 support Sascha Hauer
2010-10-11 11:28 ` [PATCH 17/17] ARM i.MX51: Add babbage board support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201010111448.43598.jbe@pengutronix.de \
    --to=jbe@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox