mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Juergen Beisert <jbe@pengutronix.de>
Cc: barebox@lists.infradead.org, Juergen Beisert <juergen@kreuzholzen.de>
Subject: Re: [PATCH 08/12] Add a video driver for S3C2440 bases platforms
Date: Mon, 1 Nov 2010 15:41:42 +0100	[thread overview]
Message-ID: <20101101144142.GA6017@pengutronix.de> (raw)
In-Reply-To: <1288092708-5187-9-git-send-email-jbe@pengutronix.de>

On Tue, Oct 26, 2010 at 01:31:44PM +0200, Juergen Beisert wrote:
> From: Juergen Beisert <juergen@kreuzholzen.de>
> 
> Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
> ---
>  arch/arm/mach-s3c24xx/include/mach/fb.h |   40 +++
>  drivers/video/Kconfig                   |    6 +
>  drivers/video/Makefile                  |    1 +
>  drivers/video/s3c.c                     |  452 +++++++++++++++++++++++++++++++
>  4 files changed, 499 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-s3c24xx/include/mach/fb.h
>  create mode 100644 drivers/video/s3c.c
> 
> diff --git a/arch/arm/mach-s3c24xx/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h
> new file mode 100644
> index 0000000..eec6164
> --- /dev/null
> +++ b/arch/arm/mach-s3c24xx/include/mach/fb.h
> @@ -0,0 +1,40 @@
> +/*
> + * Copyright (C) 2010 Juergen Beisert
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef __MACH_FB_H_
> +# define __MACH_FB_H_
> +
> +#include <fb.h>
> +
> +struct s3c_fb_platform_data {
> +
> +	const struct fb_videomode *mode_list;
> +	unsigned mode_cnt;
> +
> +	int passive_display;	/**< enable support for STN or CSTN displays */
> +
> +	void *framebuffer;	/**< force framebuffer base address */
> +	unsigned size;		/**< force framebuffer size */
> +
> +	/** hook to enable backlight and stuff */
> +	void (*enable)(int);
> +};
> +
> +#endif /* __MACH_FB_H_ */
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index d7f3d01..5a5edd2 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -39,4 +39,10 @@ config DRIVER_VIDEO_IMX_IPU
>  	  Add support for the IPU framebuffer device found on
>  	  i.MX31 and i.MX35 CPUs.
>  
> +config S3C_VIDEO
> +	bool "S3C244x framebuffer driver"
> +	depends on ARCH_S3C24xx
> +	help
> +	  Add support for the S3C244x LCD controller.
> +
>  endif
> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> index 179f0c4..4287fc8 100644
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -2,3 +2,4 @@ obj-$(CONFIG_VIDEO) += fb.o
>  
>  obj-$(CONFIG_DRIVER_VIDEO_IMX) += imx.o
>  obj-$(CONFIG_DRIVER_VIDEO_IMX_IPU) += imx-ipu-fb.o
> +obj-$(CONFIG_S3C_VIDEO) += s3c.o
> diff --git a/drivers/video/s3c.c b/drivers/video/s3c.c
> new file mode 100644
> index 0000000..8ae5785
> --- /dev/null
> +++ b/drivers/video/s3c.c
> @@ -0,0 +1,452 @@
> +/*
> + * Copyright (C) 2010 Juergen Beisert
> + *
> + * This driver is based on a patch found in the web:
> + * (C) Copyright 2006 by OpenMoko, Inc.
> + * Author: Harald Welte <laforge at openmoko.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +/* #define DEBUG */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <fb.h>
> +#include <driver.h>
> +#include <malloc.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <mach/gpio.h>
> +#include <mach/s3c24xx-generic.h>
> +#include <mach/s3c24x0-clocks.h>
> +#include <mach/fb.h>
> +
> +#define LCDCON1 0x00
> +# define PNRMODE(x) (((x) & 3) << 5)
> +# define BPPMODE(x) (((x) & 0xf) << 1)
> +# define SET_CLKVAL(x) (((x) & 0x3ff) << 8)
> +# define GET_CLKVAL(x) (((x) >> 8) & 0x3ff)
> +# define ENVID (1 << 0)
> +
> +#define LCDCON2 0x04
> +# define SET_VBPD(x) (((x) & 0xff) << 24)
> +# define SET_LINEVAL(x) (((x) & 0x3ff) << 14)
> +# define SET_VFPD(x) (((x) & 0xff) << 6)
> +# define SET_VSPW(x) ((x) & 0x3f)
> +
> +#define LCDCON3 0x08
> +# define SET_HBPD(x) (((x) & 0x7f) << 19)
> +# define SET_HOZVAL(x) (((x) & 0x7ff) << 8)
> +# define SET_HFPD(x) ((x) & 0xff)
> +
> +#define LCDCON4 0x0c
> +# define SET_HSPW(x) ((x) & 0xff)
> +
> +#define LCDCON5 0x10
> +# define BPP24BL (1 << 12)
> +# define FRM565 (1 << 11)
> +# define INV_CLK (1 << 10)
> +# define INV_HS (1 << 9)
> +# define INV_VS (1 << 8)
> +# define INV_DTA (1 << 7)
> +# define INV_DE (1 << 6)
> +# define INV_PWREN (1 << 5)
> +# define INV_LEND (1 << 4)	/* FIXME */
> +# define ENA_PWREN (1 << 3)
> +# define ENA_LEND (1 << 2)	/* FIXME */
> +# define BSWP (1 << 1)
> +# define HWSWP (1 << 0)
> +
> +#define LCDSADDR1 0x14
> +# define SET_LCDBANK(x) (((x) & 0x1ff) << 21)
> +# define GET_LCDBANK(x) (((x) >> 21) & 0x1ff)
> +# define SET_LCDBASEU(x) ((x) & 0x1fffff)
> +# define GET_LCDBASEU(x) ((x) & 0x1fffff)
> +
> +#define LCDSADDR2 0x18
> +# define SET_LCDBASEL(x) ((x) & 0x1fffff)
> +# define GET_LCDBASEL(x) ((x) & 0x1fffff)
> +
> +#define LCDSADDR3 0x1c
> +# define SET_OFFSIZE(x) (((x) & 0x7ff) << 11)
> +# define GET_OFFSIZE(x) (((x) >> 11) & 0x7ff)
> +# define SET_PAGE_WIDTH(x) ((x) & 0x3ff)
> +# define GET_PAGE_WIDTH(x) ((x) & 0x3ff)
> +
> +#define RED_LUT 0x20
> +#define GREEN_LUT 0x24
> +#define BLUE_LUT 0x28
> +
> +#define DITHMODE 0x4c
> +
> +#define TPAL 0x50
> +
> +#define LCDINTPND 0x54
> +
> +#define LCDSRCPND 0x58
> +
> +#define LCDINTMSK 0x5c
> +# define FIWSEL (1 << 2)
> +
> +#define TCONSEL 0x60
> +
> +#define RED 0
> +#define GREEN 1
> +#define BLUE 2
> +#define TRANSP 3
> +
> +struct s3cfb_host {
> +	struct fb_host fb_data;
> +	struct device_d *hw_dev;
> +	void __iomem *base;
> +};
> +
> +#define fb_info_to_s3cfb_host(x) ((struct s3cfb_host*)((x)->host))

> +#define s3cfb_host_to_s3c_fb_platform_data(x) ((struct s3c_fb_platform_data*)((x)->hw_dev->platform_data))

Please add a pointer to 3c_fb_platform_data to s3cfb_host and get rid of
this define.

> +
> +/* the RGB565 true colour mode */
> +static const struct fb_bitfield def_rgb565[] = {
> +	[RED] = {
> +		.offset = 11,
> +		.length = 5,
> +	},
> +	[GREEN] = {
> +		.offset = 5,
> +		.length = 6,
> +	},
> +	[BLUE] = {
> +		.offset = 0,
> +		.length = 5,
> +	},
> +	[TRANSP] = {	/* no support for transparency */
> +		.length = 0,
> +	}
> +};
> +
> +/* the RGB888 true colour mode */
> +static const struct fb_bitfield def_rgb888[] = {
> +	[RED] = {
> +		.offset = 16,
> +		.length = 8,
> +	},
> +	[GREEN] = {
> +		.offset = 8,
> +		.length = 8,
> +	},
> +	[BLUE] = {
> +		.offset = 0,
> +		.length = 8,
> +	},
> +	[TRANSP] = {	/* no support for transparency */
> +		.length = 0,
> +	}
> +};
> +
> +/**
> + * @param fb_info Framebuffer information
> + */
> +static void s3cfb_enable_controller(struct fb_info *fb_info)
> +{
> +	struct s3cfb_host *fbh = fb_info_to_s3cfb_host(fb_info);
> +	struct s3c_fb_platform_data *pdata = s3cfb_host_to_s3c_fb_platform_data(fbh);
> +	uint32_t con1;
> +
> +	pr_debug("%s called\n", __func__);
> +
> +	con1 = readl(fbh->base + LCDCON1);
> +
> +	con1 |= ENVID;
> +
> +	writel(con1, fbh->base + LCDCON1);
> +
> +	if (pdata->enable)
> +		(pdata->enable)(1);
> +}
> +
> +/**
> + * @param fb_info Framebuffer information
> + */
> +static void s3cfb_disable_controller(struct fb_info *fb_info)
> +{
> +	struct s3cfb_host *fbh = fb_info_to_s3cfb_host(fb_info);
> +	struct s3c_fb_platform_data *pdata = s3cfb_host_to_s3c_fb_platform_data(fbh);
> +	uint32_t con1;
> +
> +	pr_debug("%s called\n", __func__);
> +
> +	if (pdata->enable)
> +		(pdata->enable)(0);
> +
> +	con1 = readl(fbh->base + LCDCON1);
> +
> +	con1 &= ~ENVID;
> +
> +	writel(con1, fbh->base + LCDCON1);
> +}
> +
> +/**
> + * Prepare the video hardware for a specified video mode
> + * @param fb_info Framebuffer information
> + * @param mode The video mode description to initialize
> + * @return 0 on success
> + */
> +static int s3cfb_initialize_mode(struct fb_info *fb_info, const struct fb_videomode *mode)
> +{
> +	struct s3cfb_host *fbh = fb_info_to_s3cfb_host(fb_info);
> +	struct s3c_fb_platform_data *pdata = s3cfb_host_to_s3c_fb_platform_data(fbh);
> +	unsigned size, hclk, div;
> +	uint32_t con1, con2, con3, con4, con5 = 0;
> +
> +	pr_debug("%s called\n", __func__);
> +
> +	if (pdata->passive_display != 0) {
> +		pr_err("Passive displays are currently not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	/*
> +	 * we need at least this amount of memory for the framebuffer
> +	 */
> +	size = mode->xres * mode->yres * (fb_info->bits_per_pixel >> 3);
> +	if (fb_info->fb_dev->size != 0) {
> +		if (size > fb_info->fb_dev->size) {
> +			pr_err("Cannot initialize video mode '%s': Its too large. "
> +				"Required bytes are %u, available only %u\n",
> +				mode->name, size, fb_info->fb_dev->size);
> +			return -EINVAL;
> +		}
> +	} else
> +		fb_info->fb_dev->size = size;
> +
> +	/*
> +	 * if no framebuffer memory was specified yet, allocate one,
> +	 * and allocate more memory, on user request
> +	 */
> +	if (fb_info->fb_dev->map_base == 0U)
> +		fb_info->fb_dev->map_base = (resource_size_t)xzalloc(fb_info->fb_dev->size);

Honestly I don't understand what the two blocks above do. I hope this
gets simpler once we remove the base/size arguments from
register_framebuffer.

> +
> +	/* its useful to enable the unit's clock */
> +	s3c244x_mod_clock(CLK_LCDC, 1);
> +
> +	/* ensure video output is _off_ */
> +	writel(0x00000000, fbh->base + LCDCON1);
> +
> +	hclk = s3c24xx_get_hclk() / 1000U;	/* hclk in kHz */
> +	div = hclk / PICOS2KHZ(mode->pixclock);
> +	if (div < 3)
> +		div  = 3;
> +	/* pixel clock is: (hclk) / ((div + 1) * 2) */
> +	div += 1;
> +	div >>= 1;
> +	div -= 1;
> +
> +	con1 = PNRMODE(3) | SET_CLKVAL(div);	/* PNRMODE=3 is TFT */
> +
> +	switch (fb_info->bits_per_pixel) {
> +#if 0
> +	/* TODO add CLUT based modes */
> +	case 1:
> +		con1 |= BPPMODE(8);
> +		break;
> +	case 2:
> +		con1 |= BPPMODE(9);
> +		break;
> +	case 4:
> +		con1 |= BPPMODE(10);
> +		break;
> +	case 8:
> +		con1 |= BPPMODE(11);
> +		break;
> +#endif
> +	case 16:
> +		con1 |= BPPMODE(12);
> +		con5 |= FRM565;
> +		fb_info->red = def_rgb565[RED];
> +		fb_info->green = def_rgb565[GREEN];
> +		fb_info->blue = def_rgb565[BLUE];
> +		fb_info->transp =  def_rgb565[TRANSP];
> +		break;
> +	case 24:
> +		con1 |= BPPMODE(13);
> +		con5 |= BPP24BL;	/* FIXME */

Please either remove the FIXME or explain what we have to fix here.

> +		fb_info->red = def_rgb888[RED];
> +		fb_info->green = def_rgb888[GREEN];
> +		fb_info->blue = def_rgb888[BLUE];
> +		fb_info->transp =  def_rgb888[TRANSP];
> +		break;
> +	default:
> +		pr_err("Invalid bits per pixel value: %u\n", fb_info->bits_per_pixel);
> +		return -EINVAL;
> +	}
> +
> +	/* 'normal' in register description means positive logic */
> +	if (!(mode->sync & FB_SYNC_HOR_HIGH_ACT))
> +		con5 |= INV_HS;
> +	if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT))
> +		con5 |= INV_VS;
> +	if (!(mode->sync & FB_SYNC_DE_HIGH_ACT))
> +		con5 |= INV_DE;
> +	if (mode->sync & FB_SYNC_CLK_INVERT)
> +		con5 |= INV_CLK;	/* display should latch at the rising edge */
> +	if (mode->sync & FB_SYNC_SWAP_RGB)
> +		con5 |= HWSWP;
> +
> +	/* TODO power enable config via platform data */
> +
> +	/* vertical timing */
> +	con2 = SET_VBPD(mode->upper_margin - 1) |
> +		SET_LINEVAL(mode->yres - 1) |
> +		SET_VFPD(mode->lower_margin - 1) |
> +		SET_VSPW(mode->vsync_len - 1);
> +
> +	/* horizontal timing */
> +	con3 = SET_HBPD(mode->left_margin - 1) |
> +		SET_HOZVAL(mode->xres - 1) |
> +		SET_HFPD(mode->right_margin - 1);
> +	con4 = SET_HSPW(mode->hsync_len - 1);
> +
> +	/* basic timing setup */
> +	writel(con1, fbh->base + LCDCON1);
> +	pr_debug(" Writing %08X into %08X (con1)\n", con1, fbh->base + LCDCON1);
> +	writel(con2, fbh->base + LCDCON2);
> +	pr_debug(" Writing %08X into %08X (con2)\n", con2, fbh->base + LCDCON2);
> +	writel(con3, fbh->base + LCDCON3);
> +	pr_debug(" Writing %08X into %08X (con3)\n", con3, fbh->base + LCDCON3);
> +	writel(con4, fbh->base + LCDCON4);
> +	pr_debug(" Writing %08X into %08X (con4)\n", con4, fbh->base + LCDCON4);
> +	writel(con5, fbh->base + LCDCON5);
> +	pr_debug(" Writing %08X into %08X (con5)\n", con5, fbh->base + LCDCON5);
> +
> +	pr_debug("Setting up the fb baseadress to %08X\n", fb_info->fb_dev->map_base);
> +
> +	/* framebuffer memory setup */
> +	writel(fb_info->fb_dev->map_base >> 1, fbh->base + LCDSADDR1);
> +	size = mode->xres * (fb_info->bits_per_pixel >> 3) * (mode->yres);

You already calculated this value.

> +	writel(SET_LCDBASEL((fb_info->fb_dev->map_base + size) >> 1), fbh->base + LCDSADDR2);
> +
> +	writel(SET_OFFSIZE(0) |
> +		SET_PAGE_WIDTH((mode->xres * fb_info->bits_per_pixel) >> 4),
> +		fbh->base + LCDSADDR3);
> +
> +	writel(FIWSEL, fbh->base + LCDINTMSK);
> +
> +	return 0;
> +}
> +
> +/**
> + * Print some information about the current hardware state
> + * @param hw_dev S3C video device
> + */
> +#ifdef CONFIG_VIDEO_INFO_VERBOSE
> +static void s3cfb_info(struct device_d *hw_dev)
> +{
> +	uint32_t con1, addr1, addr2, addr3;
> +
> +	con1 = readl(hw_dev->map_base + LCDCON1);
> +	addr1 = readl(hw_dev->map_base + LCDSADDR1);
> +	addr2 = readl(hw_dev->map_base + LCDSADDR2);
> +	addr3 = readl(hw_dev->map_base + LCDSADDR3);
> +
> +	printf(" Video hardware info:\n");
> +	printf("  Video clock is running at %u Hz\n", s3c24xx_get_hclk() / ((GET_CLKVAL(con1) + 1) * 2));
> +	printf("  Video memory bank starts at 0x%08X\n", GET_LCDBANK(addr1) << 22);
> +	printf("  Video memory bank offset: 0x%08X\n", GET_LCDBASEU(addr1));
> +	printf("  Video memory end: 0x%08X\n", GET_LCDBASEU(addr2));
> +	printf("  Virtual screen offset size: %u half words\n", GET_OFFSIZE(addr3));
> +	printf("  Virtual screen page width: %u half words\n", GET_PAGE_WIDTH(addr3));
> +}
> +#endif
> +
> +/*
> + * There is only one video hardware instance available.
> + * It makes no sense to dynamically allocate this data
> + */
> +static struct s3cfb_host host_data = {
> +	.fb_data.fb_mode = s3cfb_initialize_mode,
> +	.fb_data.fb_enable = s3cfb_enable_controller,
> +	.fb_data.fb_disable = s3cfb_disable_controller,
> +};
> +
> +static int s3cfb_probe(struct device_d *hw_dev)
> +{
> +	struct s3c_fb_platform_data *pdata = hw_dev->platform_data;
> +	struct device_d *fb_dev;
> +
> +	pr_debug("%s called\n", __func__);
> +
> +	if (pdata == NULL) {
> +		pr_debug("Framebuffer driver missing platform data");
> +		return -ENODEV;
> +	}
> +
> +	/* enable unit's clock */
> +	s3c244x_mod_clock(CLK_LCDC, 1);
> +
> +	writel(0, hw_dev->map_base + LCDCON1);
> +	/* off may be means high level (FIXME itlp specific) */
> +	writel(0, hw_dev->map_base + LCDCON5);
> +
> +	/* disable it again until user request */
> +	s3c244x_mod_clock(CLK_LCDC, 0);
> +
> +	/* add runtime hardware info */
> +	host_data.hw_dev = hw_dev;
> +	host_data.base = (void*)hw_dev->map_base;
> +
> +	/* add runtime video info */
> +	host_data.fb_data.mode = pdata->mode_list;
> +	host_data.fb_data.mode_cnt = pdata->mode_cnt;
> +
> +	fb_dev = register_framebuffer(&host_data.fb_data, pdata->framebuffer, pdata->size);
> +	if (fb_dev == NULL) {
> +		pr_err("Failed to register framebuffer\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static struct driver_d s3cfb_driver = {
> +	.name	= "s3cfb",
> +	.probe	= s3cfb_probe,
> +#ifdef CONFIG_VIDEO_INFO_VERBOSE
> +	.info	= s3cfb_info,
> +#endif
> +};
> +
> +static int s3cfb_init(void)
> +{
> +	return register_driver(&s3cfb_driver);
> +}
> +
> +device_initcall(s3cfb_init);
> +
> +/**
> + * The S3C244x LCD controller supports passive (CSTN/STN) and active (TFT) LC displays
> + *
> + * The driver itself currently supports only active TFT LC displays in the follwing manner:
> + *
> + *  * Palletized colours
> + *    - 1 bpp
> + *    - 2 bpp
> + *    - 4 bpp
> + *    - 8 bpp
> + *  * True colours
> + *    - 16 bpp
> + *    - 24 bpp
> + */
> -- 
> 1.7.2.3
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2010-11-01 14:41 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-26 11:31 [PATCHv2] Add dynamic video initialization to barebox Juergen Beisert
2010-10-26 11:31 ` [PATCH 01/12] Separate framebuffer platformdata and the videomode Juergen Beisert
2010-10-26 11:31 ` [PATCH 02/12] Add more flags for sync control Juergen Beisert
2010-10-26 11:31 ` [PATCH 03/12] Bring in dynamic videomode selection at runtime Juergen Beisert
2010-11-01 13:47   ` Sascha Hauer
2010-11-15 10:04     ` Juergen Beisert
2010-11-17  8:27       ` Sascha Hauer
2010-11-01 14:16   ` Sascha Hauer
2010-11-15 10:08     ` Juergen Beisert
2010-10-26 11:31 ` [PATCH 04/12] Remove the old videomode functions Juergen Beisert
2010-10-26 11:31 ` [PATCH 05/12] Add verbose framebuffer device info Juergen Beisert
2010-10-26 11:31 ` [PATCH 06/12] Adapt the existing imx fb driver to support runtime videomode selection Juergen Beisert
2010-10-26 11:31 ` [PATCH 07/12] Adapt the existing imx-ipu " Juergen Beisert
2010-10-26 11:31 ` [PATCH 08/12] Add a video driver for S3C2440 bases platforms Juergen Beisert
2010-11-01 14:41   ` Sascha Hauer [this message]
2010-11-15 11:35     ` Juergen Beisert
2010-11-17  8:36       ` Sascha Hauer
2010-10-26 11:31 ` [PATCH 09/12] STM378x: Add video driver for this platform Juergen Beisert
2010-10-26 11:31 ` [PATCH 10/12] Remove variable size restrictions Juergen Beisert
2010-10-26 11:31 ` [PATCH 11/12] Add doxygen documentation to the framebfuffer code Juergen Beisert
2010-10-26 11:31 ` [PATCH 12/12] Provide more driver specific data in a videomode Juergen Beisert
2010-11-01 13:19 ` [PATCHv2] Add dynamic video initialization to barebox Sascha Hauer
2010-11-01 13:29   ` Eric Bénard
2010-11-01 14:18     ` Sascha Hauer
2010-11-15  9:57   ` Juergen Beisert
2010-11-15 10:25     ` Belisko Marek
2010-11-17  8:44       ` Sascha Hauer
2010-11-18  8:18         ` Belisko Marek
2010-11-18 10:09           ` Sascha Hauer
2010-11-17  8:43     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101101144142.GA6017@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=jbe@pengutronix.de \
    --cc=juergen@kreuzholzen.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox