From: Marc Reilly <marc@cpdesign.com.au>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 3/3] imx(25, 35): save boot location into $boot_loc env.
Date: Tue, 11 Jan 2011 21:34:35 +1100 [thread overview]
Message-ID: <201101112134.35813.marc@cpdesign.com.au> (raw)
In-Reply-To: <20110111094151.GO12078@pengutronix.de>
Hi Sascha,
> > +
> > +#if defined(CONFIG_ARCH_IMX25) || defined(CONFIG_ARCH_IMX35)
> > +static int imx_boot_save_loc(void)
> > +{
> > + const char *bootloc = NULL;
> > + uint32_t reg;
> > +
> > + reg = readl(IMX_CCM_BASE + CCM_RCSR);
> > +
> > + switch ((reg >> CCM_RCSR_MEM_CTRL_SHIFT) & 0x3) {
> > + case 0x03: /* SD/MMC, I2C, SPI is the source */
> > + bootloc = "expansion";
> > + break;
> > + case 0x01: /* NAND is the source */
> > + bootloc = "nand";
> > + break;
> > + case 0x00: /* NOR, OneNand is the source */
> > + bootloc = "weim";
> > + break;
> > + default:
> > + break;
> > + }
>
> This is not exactly what I meant. Your original "nor" and "mmc" strings
> were ok. The boards in the tree do not support booting from eeproms (am
> I wrong?),
I don't think any existing boards have the hardware, although I think barebox
could handle it from a SW point of view. From memory the only source not
copied by out the boot rom is NOR.
> so bootloc has the correct value for the boards in the tree.
> Now with this patch we have a situation that when somebody adds a board
> which can boot from eeprom, he will update this function and "expansion"
> will become "mmc" or "eeprom" breaking your environment scripts.
I'll do another round where I handle all of them.. (like I should have done
before :)
nor onenand nand mmc prom_i2c prom_spi -- do these names sound ok for
everyone?
>
> > +
> > + if (bootloc) {
> > + setenv("boot_loc", bootloc);
> > + export("boot_loc");
> > + }
>
> I just asked two collegues about the meaning of a boot_location variable
> and they both said this would be the variable where Linux should be
> booted from.
Isn't that already kernel_loc?
> Maybe barebox_location is a better name?
Then how about boot_source? (or boot_src). Or boot_media? These seem to me to
be a better fit, but I don't have any colleagues to bounce them off :)
I'm also happy with barebox_loc, so no dramas.
>
> I already took the first two patches, so you don't have to resend them.
Just to check - did you take from v1 or v2? in v2 For the second patch in V2 I
also added the MEM_TYPE_SHIFT defines..
Cheers
Marc
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-01-11 10:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-10 23:40 [PATCH v2] imx: Save boot source into env during init Marc Reilly
2011-01-10 23:40 ` [PATCH v2 1/3] Init env context a bit earlier in initalization sequence Marc Reilly
2011-01-10 23:40 ` [PATCH v2 2/3] imx: add reg definitions for imx25 and imx35 boot source Marc Reilly
2011-01-10 23:40 ` [PATCH v2 3/3] imx(25,35): save boot location into $boot_loc env Marc Reilly
2011-01-11 9:41 ` Sascha Hauer
2011-01-11 10:34 ` Marc Reilly [this message]
2011-01-11 10:39 ` [PATCH v2 3/3] imx(25, 35): " Eric Bénard
2011-01-11 11:32 ` [PATCH v2 3/3] imx(25,35): " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201101112134.35813.marc@cpdesign.com.au \
--to=marc@cpdesign.com.au \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox