From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1PdolY-0006P7-JM for barebox@lists.infradead.org; Fri, 14 Jan 2011 18:52:59 +0000 Date: Fri, 14 Jan 2011 19:52:43 +0100 From: Sascha Hauer Message-ID: <20110114185243.GM24373@pengutronix.de> References: <20110114132644.GL24373@pengutronix.de> <20110114152538.GA27519@game.jcrosoft.org> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20110114152538.GA27519@game.jcrosoft.org> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: /dev/env0 not found To: Jean-Christophe PLAGNIOL-VILLARD Cc: barebox@lists.infradead.org On Fri, Jan 14, 2011 at 04:25:38PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 14:26 Fri 14 Jan , Sascha Hauer wrote: > > Hi Nataraj, > > > > On Fri, Jan 14, 2011 at 12:01:25PM +0000, Nataraj S Narayan wrote: > > > Hi > > > > > > How I come I don't have /dev/env0? I am on at91sam9263ek. > > > > > > 9263-EK:/ saveenv > > > saving environment > > > could not open /dev/env0: Read-only file system > > > > > > 9263-EK:/ ls -l /dev/env0 > > > ls: /dev/env0: No such file or directory > > > > > > 9263-EK:/ ls -l /dev/ > > > cr-------- 4294967295 zero > > > crw------- 3785 defaultenv > > > crw------- 4294967295 mem > > > crw------- 67108864 ram0 > > > crw------- 268435456 nand0 > > > cr-------- 8388608 nand_oob0 > > > crw------- 32 phy0 > > > crw------- 3851423744 nor-352321538 > > ^^^^^^^^^^ > > > > This should normally be nor0. The name comes from > > info->cdev.name = asprintf("nor%d", dev->id); > > in cfi_probe. dev->id is normally initialized to -1 in > > arch/arm/boards/at91sam9263ek/init.c, then changed to 0 in > > register_device: > > > > if (new_device->id < 0) { > > new_device->id = get_free_deviceid(new_device->name); > > } > > ... > > > > I have no idea why this does not work in your case, so it's maybe best > > to add some printfs in the path I just described to see where dev->id is > > actually changed to such a bogus value. > > > > Note that on the at91sam9263ek the environment partition is added as > > follows: > > > > #if defined(CONFIG_DRIVER_CFI) || defined(CONFIG_DRIVER_CFI_OLD) > > devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self"); > > devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0"); > > #elif defined(CONFIG_NAND_ATMEL) > > devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw"); > > dev_add_bb_dev("self_raw", "self0"); > > devfs_add_partition("nand0", 0x40000, 0x40000, PARTITION_FIXED, "env_raw"); > > dev_add_bb_dev("env_raw", "env0"); > > #endif > > > > This means that when both nand and nor flash is compiled in the > > environment which be in nor flash. On i.MX we have a way to figure out > > if barebox is started from nor or from nand and locate the environment > > in the same device as barebox is started from. I don't know if that's > > possible on the Atmel processors though. > unfortunatly no Maybe we should add a kconfig option for this. The current behaviour seems rather random. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox