some i.MX28 related patches

some i.MX28 related patches

[Sascha Hauer]

The following patches make the MMU usable on the tx28 board and allow
to pass in framebuffer addresses from platform data on i.MX28.

The following changes since commit 0327e12f068471dc03577407b8f8915914c2be32:

  fb: update cdev map_base (2011-01-14 20:42:17 +0100)

are available in the git repository at:
  none ..BRANCH.NOT.VERIFIED..

Sascha Hauer (7):
      fec i.MX28: Make it work with MMU on
      ARM tx28: Add mmu support
      video stm/mx2x: simplify memory allocation
      video stm/mx2x: allow to pass in fb memory from platform data
      provide real barebox end variable
      ARM i.MX28 tx28: use a fixed framebuffer address
      ARM i.MX28 tx28 defconfig: enable MMU

 arch/arm/boards/karo-tx28/tx28-stk5.c |   12 ++++++++++++
 arch/arm/boards/karo-tx28/tx28.c      |   23 +++++++++++++++++++++++
 arch/arm/configs/tx28stk5_defconfig   |    1 +
 arch/arm/mach-stm/Kconfig             |    1 +
 arch/arm/mach-stm/include/mach/fb.h   |    3 +++
 drivers/net/fec_imx.c                 |    2 +-
 drivers/video/stm.c                   |   31 ++++++++-----------------------
 include/reloc.h                       |    2 +-
 8 files changed, 50 insertions(+), 25 deletions(-)


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/7] fec i.MX28: Make it work with MMU on

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/net/fec_imx.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index 51cdb40..440ef1f 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -565,7 +565,7 @@ static int fec_recv(struct eth_device *dev)
 
 			if (cpu_is_mx28())
 				imx28_fix_endianess_rd(
-					(void *)readl(&rbd->data_pointer),
+					phys_to_virt(readl(&rbd->data_pointer)),
 					(readw(&rbd->data_length) + 3) >> 2);
 
 			/*
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/7] ARM tx28: Add mmu support

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/karo-tx28/tx28.c |   23 +++++++++++++++++++++++
 arch/arm/mach-stm/Kconfig        |    1 +
 2 files changed, 24 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boards/karo-tx28/tx28.c b/arch/arm/boards/karo-tx28/tx28.c
index 6f4ef4e..5692171 100644
--- a/arch/arm/boards/karo-tx28/tx28.c
+++ b/arch/arm/boards/karo-tx28/tx28.c
@@ -21,6 +21,7 @@
 #include <asm/io.h>
 #include <generated/mach-types.h>
 #include <mach/imx-regs.h>
+#include <asm/mmu.h>
 
 static struct memory_platform_data ram_pdata = {
 	.name = "ram0",
@@ -82,6 +83,28 @@ static const uint32_t tx28_pad_setup[] = {
 
 extern void base_board_init(void);
 
+#ifdef CONFIG_MMU
+static int tx28_mmu_init(void)
+{
+	mmu_init();
+
+	arm_create_section(0x40000000, 0x40000000, 128, PMD_SECT_DEF_CACHED);
+	arm_create_section(0x50000000, 0x40000000, 128, PMD_SECT_DEF_UNCACHED);
+
+	setup_dma_coherent(0x10000000);
+
+#if TEXT_BASE & (0x100000 - 1)
+#warning cannot create vector section. Adjust TEXT_BASE to a 1M boundary
+#else
+	arm_create_section(0x0,        TEXT_BASE,   1, PMD_SECT_DEF_UNCACHED);
+#endif
+	mmu_enable();
+
+	return 0;
+}
+postcore_initcall(tx28_mmu_init);
+#endif
+
 static int tx28_devices_init(void)
 {
 	int i;
diff --git a/arch/arm/mach-stm/Kconfig b/arch/arm/mach-stm/Kconfig
index e47d9f1..402a9b7 100644
--- a/arch/arm/mach-stm/Kconfig
+++ b/arch/arm/mach-stm/Kconfig
@@ -55,6 +55,7 @@ choice
 
 config MACH_TX28
 	bool "KARO tx28"
+	select HAVE_MMU
 	help
 	  Say Y here if you are using the KARO TX28 CPU module.
 
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/7] video stm/mx2x: simplify memory allocation

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/video/stm.c |   26 ++------------------------
 1 files changed, 2 insertions(+), 24 deletions(-)

diff --git a/drivers/video/stm.c b/drivers/video/stm.c
index f0abe4c..d2add41 100644
--- a/drivers/video/stm.c
+++ b/drivers/video/stm.c
@@ -209,24 +209,6 @@ static inline unsigned calc_line_length(unsigned ppl, unsigned bpp)
 	return (ppl * bpp) >> 3;
 }
 
-static int stmfb_memory_mmgt(struct fb_info *fb_info, unsigned size)
-{
-	struct imxfb_info *fbi = fb_info->priv;
-
-	if (fbi->memory_size != 0) {
-		free(fb_info->screen_base);
-		fb_info->screen_base = NULL;
-		fbi->memory_size = 0;
-	}
-
-	if (fbi->memory_size == 0) {
-		fb_info->screen_base = xzalloc(size);
-		fbi->memory_size = size;
-	}
-
-	return 0;
-}
-
 static void stmfb_enable_controller(struct fb_info *fb_info)
 {
 	struct imxfb_info *fbi = fb_info->priv;
@@ -308,7 +290,6 @@ static int stmfb_activate_var(struct fb_info *fb_info)
 	struct imx_fb_videomode *pdata = fbi->pdata;
 	struct fb_videomode *mode = fb_info->mode;
 	uint32_t reg;
-	int ret;
 	unsigned size;
 
 	/*
@@ -317,11 +298,8 @@ static int stmfb_activate_var(struct fb_info *fb_info)
 	size = calc_line_length(mode->xres, fb_info->bits_per_pixel) *
 		mode->yres;
 
-	ret = stmfb_memory_mmgt(fb_info, size);
-	if (ret != 0) {
-		dev_err(fbi->hw_dev, "Cannot allocate framebuffer memory\n");
-		return ret;
-	}
+	fb_info->screen_base = xrealloc(fb_info->screen_base, size);
+	fbi->memory_size = size;
 
 	/** @todo ensure HCLK is active at this point of time! */
 
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 3/7] video stm/mx2x: simplify memory allocation

[Juergen Beisert]

Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/video/stm.c |   26 ++------------------------
>  1 files changed, 2 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/video/stm.c b/drivers/video/stm.c
> index f0abe4c..d2add41 100644
> --- a/drivers/video/stm.c
> +++ b/drivers/video/stm.c
> @@ -209,24 +209,6 @@ static inline unsigned calc_line_length(unsigned ppl,
> unsigned bpp) return (ppl * bpp) >> 3;
>  }
>
> -static int stmfb_memory_mmgt(struct fb_info *fb_info, unsigned size)
> -{
> -	struct imxfb_info *fbi = fb_info->priv;
> -
> -	if (fbi->memory_size != 0) {
> -		free(fb_info->screen_base);
> -		fb_info->screen_base = NULL;
> -		fbi->memory_size = 0;
> -	}
> -
> -	if (fbi->memory_size == 0) {
> -		fb_info->screen_base = xzalloc(size);
> -		fbi->memory_size = size;
> -	}
> -
> -	return 0;
> -}
> -
>  static void stmfb_enable_controller(struct fb_info *fb_info)
>  {
>  	struct imxfb_info *fbi = fb_info->priv;
> @@ -308,7 +290,6 @@ static int stmfb_activate_var(struct fb_info *fb_info)
>  	struct imx_fb_videomode *pdata = fbi->pdata;
>  	struct fb_videomode *mode = fb_info->mode;
>  	uint32_t reg;
> -	int ret;
>  	unsigned size;
>
>  	/*
> @@ -317,11 +298,8 @@ static int stmfb_activate_var(struct fb_info *fb_info)
>  	size = calc_line_length(mode->xres, fb_info->bits_per_pixel) *
>  		mode->yres;
>
> -	ret = stmfb_memory_mmgt(fb_info, size);
> -	if (ret != 0) {
> -		dev_err(fbi->hw_dev, "Cannot allocate framebuffer memory\n");
> -		return ret;
> -	}
> +	fb_info->screen_base = xrealloc(fb_info->screen_base, size);
> +	fbi->memory_size = size;
>
>  	/** @todo ensure HCLK is active at this point of time! */

Maybe we should change here from the x-functions to an allocation routine that 
returns NULL when there is not enough memory. When you define the malloc area 
to small and setup an SXGA resolution with 16 bit colour depth, barebox 
should IMHO bark with a useful error message than rebooting... 

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 3/7] video stm/mx2x: simplify memory allocation

[Sascha Hauer]

On Sat, Jan 15, 2011 at 04:00:26PM +0100, Juergen Beisert wrote:
> Sascha Hauer wrote:
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/video/stm.c |   26 ++------------------------
> >  1 files changed, 2 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/video/stm.c b/drivers/video/stm.c
> > index f0abe4c..d2add41 100644
> > --- a/drivers/video/stm.c
> > +++ b/drivers/video/stm.c
> > @@ -209,24 +209,6 @@ static inline unsigned calc_line_length(unsigned ppl,
> > unsigned bpp) return (ppl * bpp) >> 3;
> >  }
> >
> > -static int stmfb_memory_mmgt(struct fb_info *fb_info, unsigned size)
> > -{
> > -	struct imxfb_info *fbi = fb_info->priv;
> > -
> > -	if (fbi->memory_size != 0) {
> > -		free(fb_info->screen_base);
> > -		fb_info->screen_base = NULL;
> > -		fbi->memory_size = 0;
> > -	}
> > -
> > -	if (fbi->memory_size == 0) {
> > -		fb_info->screen_base = xzalloc(size);
> > -		fbi->memory_size = size;
> > -	}
> > -
> > -	return 0;
> > -}
> > -
> >  static void stmfb_enable_controller(struct fb_info *fb_info)
> >  {
> >  	struct imxfb_info *fbi = fb_info->priv;
> > @@ -308,7 +290,6 @@ static int stmfb_activate_var(struct fb_info *fb_info)
> >  	struct imx_fb_videomode *pdata = fbi->pdata;
> >  	struct fb_videomode *mode = fb_info->mode;
> >  	uint32_t reg;
> > -	int ret;
> >  	unsigned size;
> >
> >  	/*
> > @@ -317,11 +298,8 @@ static int stmfb_activate_var(struct fb_info *fb_info)
> >  	size = calc_line_length(mode->xres, fb_info->bits_per_pixel) *
> >  		mode->yres;
> >
> > -	ret = stmfb_memory_mmgt(fb_info, size);
> > -	if (ret != 0) {
> > -		dev_err(fbi->hw_dev, "Cannot allocate framebuffer memory\n");
> > -		return ret;
> > -	}
> > +	fb_info->screen_base = xrealloc(fb_info->screen_base, size);
> > +	fbi->memory_size = size;
> >
> >  	/** @todo ensure HCLK is active at this point of time! */
> 
> Maybe we should change here from the x-functions to an allocation routine that 
> returns NULL when there is not enough memory. When you define the malloc area 
> to small and setup an SXGA resolution with 16 bit colour depth, barebox 
> should IMHO bark with a useful error message than rebooting...

Agreed.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/7] video stm/mx2x: allow to pass in fb memory from platform data

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-stm/include/mach/fb.h |    3 +++
 drivers/video/stm.c                 |   11 +++++++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-stm/include/mach/fb.h b/arch/arm/mach-stm/include/mach/fb.h
index 65e3be2..2eade76 100644
--- a/arch/arm/mach-stm/include/mach/fb.h
+++ b/arch/arm/mach-stm/include/mach/fb.h
@@ -37,6 +37,9 @@ struct imx_fb_videomode {
 
 	unsigned dotclk_delay;	/**< refer manual HW_LCDIF_VDCTRL4 register */
 	unsigned ld_intf_width;	/**< refer STMLCDIF_* macros */
+
+	void *fixed_screen;	/**< if != NULL use this as framebuffer memory */
+	unsigned fixed_screen_size; /**< framebuffer memory size for fixed_screen */
 };
 
 #endif /* __MACH_FB_H */
diff --git a/drivers/video/stm.c b/drivers/video/stm.c
index d2add41..fc90b6a 100644
--- a/drivers/video/stm.c
+++ b/drivers/video/stm.c
@@ -298,8 +298,15 @@ static int stmfb_activate_var(struct fb_info *fb_info)
 	size = calc_line_length(mode->xres, fb_info->bits_per_pixel) *
 		mode->yres;
 
-	fb_info->screen_base = xrealloc(fb_info->screen_base, size);
-	fbi->memory_size = size;
+	if (pdata->fixed_screen) {
+		if (pdata->fixed_screen_size < size)
+			return -ENOMEM;
+		fb_info->screen_base = pdata->fixed_screen;
+		fbi->memory_size = pdata->fixed_screen_size;
+	} else {
+		fb_info->screen_base = xrealloc(fb_info->screen_base, size);
+		fbi->memory_size = size;
+	}
 
 	/** @todo ensure HCLK is active at this point of time! */
 
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 4/7] video stm/mx2x: allow to pass in fb memory from platform data

[Juergen Beisert]

Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm/mach-stm/include/mach/fb.h |    3 +++
>  drivers/video/stm.c                 |   11 +++++++++--
>  2 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-stm/include/mach/fb.h
> b/arch/arm/mach-stm/include/mach/fb.h index 65e3be2..2eade76 100644
> --- a/arch/arm/mach-stm/include/mach/fb.h
> +++ b/arch/arm/mach-stm/include/mach/fb.h
> @@ -37,6 +37,9 @@ struct imx_fb_videomode {
>
>  	unsigned dotclk_delay;	/**< refer manual HW_LCDIF_VDCTRL4 register */
>  	unsigned ld_intf_width;	/**< refer STMLCDIF_* macros */
> +
> +	void *fixed_screen;	/**< if != NULL use this as framebuffer memory */
> +	unsigned fixed_screen_size; /**< framebuffer memory size for fixed_screen
> */ };
>
>  #endif /* __MACH_FB_H */
> diff --git a/drivers/video/stm.c b/drivers/video/stm.c
> index d2add41..fc90b6a 100644
> --- a/drivers/video/stm.c
> +++ b/drivers/video/stm.c
> @@ -298,8 +298,15 @@ static int stmfb_activate_var(struct fb_info *fb_info)
>  	size = calc_line_length(mode->xres, fb_info->bits_per_pixel) *
>  		mode->yres;
>
> -	fb_info->screen_base = xrealloc(fb_info->screen_base, size);
> -	fbi->memory_size = size;
> +	if (pdata->fixed_screen) {
> +		if (pdata->fixed_screen_size < size)
> +			return -ENOMEM;
> +		fb_info->screen_base = pdata->fixed_screen;
> +		fbi->memory_size = pdata->fixed_screen_size;
> +	} else {
> +		fb_info->screen_base = xrealloc(fb_info->screen_base, size);
> +		fbi->memory_size = size;
> +	}
>
>  	/** @todo ensure HCLK is active at this point of time! */

Here for the case a user selects a screen resolution and colour depth that 
needs more memory than available, the routine returns with an error message 
for the fixed sized screen and with a reboot for the dynamic allocation case.

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 5/7] provide real barebox end variable

[Sascha Hauer]

Sometimes it's useful to have the memory end address barebox uses.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 include/reloc.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/reloc.h b/include/reloc.h
index 22cb886..a0bf15f 100644
--- a/include/reloc.h
+++ b/include/reloc.h
@@ -1,7 +1,7 @@
 #ifndef __RELOC_H
 #define __RELOC_H
 
-extern unsigned long _barebox_start, _bss_start, _bss_end, _text_base;
+extern unsigned long _barebox_start, _bss_start, _bss_end, _text_base, _end;
 
 #ifdef CONFIG_HAS_EARLY_INIT
 
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 5/7] provide real barebox end variable

[Jean-Christophe PLAGNIOL-VILLARD]

On 20:51 Fri 14 Jan     , Sascha Hauer wrote:
> Sometimes it's useful to have the memory end address barebox uses.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  include/reloc.h |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/include/reloc.h b/include/reloc.h
> index 22cb886..a0bf15f 100644
> --- a/include/reloc.h
> +++ b/include/reloc.h
> @@ -1,7 +1,7 @@
>  #ifndef __RELOC_H
>  #define __RELOC_H
>  
> -extern unsigned long _barebox_start, _bss_start, _bss_end, _text_base;
> +extern unsigned long _barebox_start, _bss_start, _bss_end, _text_base, _end;
how about _barebox_end

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 5/7] provide real barebox end variable

[Sascha Hauer]

On Sat, Jan 15, 2011 at 02:50:23AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 20:51 Fri 14 Jan     , Sascha Hauer wrote:
> > Sometimes it's useful to have the memory end address barebox uses.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  include/reloc.h |    2 +-
> >  1 files changed, 1 insertions(+), 1 deletions(-)
> > 
> > diff --git a/include/reloc.h b/include/reloc.h
> > index 22cb886..a0bf15f 100644
> > --- a/include/reloc.h
> > +++ b/include/reloc.h
> > @@ -1,7 +1,7 @@
> >  #ifndef __RELOC_H
> >  #define __RELOC_H
> >  
> > -extern unsigned long _barebox_start, _bss_start, _bss_end, _text_base;
> > +extern unsigned long _barebox_start, _bss_start, _bss_end, _text_base, _end;
> how about _barebox_end

Agreed. I just used this name because I didn't want to change all linker
scripts, but laziness is not a good argument for introducing a global variable
with such a generic name.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 6/7] ARM i.MX28 tx28: use a fixed framebuffer address

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/karo-tx28/tx28-stk5.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boards/karo-tx28/tx28-stk5.c b/arch/arm/boards/karo-tx28/tx28-stk5.c
index 6de41f7..b4dd65d 100644
--- a/arch/arm/boards/karo-tx28/tx28-stk5.c
+++ b/arch/arm/boards/karo-tx28/tx28-stk5.c
@@ -19,6 +19,8 @@
 #include <errno.h>
 #include <mci.h>
 #include <fec.h>
+#include <sizes.h>
+#include <reloc.h>
 #include <asm/io.h>
 #include <mach/imx-regs.h>
 #include <mach/clock.h>
@@ -181,11 +183,15 @@ static struct fb_videomode tx28evk_vmodes[] = {
 	},
 };
 
+#define MAX_FB_SIZE SZ_2M
+
 static struct imx_fb_videomode imxfb_mode = {
 	.mode_list = tx28evk_vmodes,
 	.mode_cnt = ARRAY_SIZE(tx28evk_vmodes),
 	.dotclk_delay = 0,	/* no adaption required */
 	.ld_intf_width = STMLCDIF_24BIT,	/* full 24 bit */
+	.fixed_screen = (void *)(0x40000000 + SZ_128M - MAX_FB_SIZE),
+	.fixed_screen_size = MAX_FB_SIZE,
 };
 
 static struct device_d ldcif_dev = {
@@ -352,6 +358,12 @@ void base_board_init(void)
 	imx_set_sspclk(0, 100000000, 1);
 
 	register_device(&mci_socket);
+
+	if (imxfb_mode.fixed_screen < (void *)&_end) {
+		printf("Warning: fixed_screen overlaps barebox\n");
+		imxfb_mode.fixed_screen = NULL;
+	}
+
 	register_device(&ldcif_dev);
 
 	imx_enable_enetclk();
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 7/7] ARM i.MX28 tx28 defconfig: enable MMU

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/tx28stk5_defconfig |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/configs/tx28stk5_defconfig b/arch/arm/configs/tx28stk5_defconfig
index 0851d5e..88ace35 100644
--- a/arch/arm/configs/tx28stk5_defconfig
+++ b/arch/arm/configs/tx28stk5_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARCH_STM=y
 CONFIG_ARCH_IMX28=y
 CONFIG_AEABI=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
 CONFIG_MALLOC_SIZE=0x800000
 CONFIG_BROKEN=y
 CONFIG_LONGHELP=y
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox