mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: Re: [PATCH 3/7] video stm/mx2x: simplify memory allocation
Date: Sat, 15 Jan 2011 16:00:26 +0100	[thread overview]
Message-ID: <201101151600.26944.jbe@pengutronix.de> (raw)
In-Reply-To: <1295034699-18863-4-git-send-email-s.hauer@pengutronix.de>

Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/video/stm.c |   26 ++------------------------
>  1 files changed, 2 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/video/stm.c b/drivers/video/stm.c
> index f0abe4c..d2add41 100644
> --- a/drivers/video/stm.c
> +++ b/drivers/video/stm.c
> @@ -209,24 +209,6 @@ static inline unsigned calc_line_length(unsigned ppl,
> unsigned bpp) return (ppl * bpp) >> 3;
>  }
>
> -static int stmfb_memory_mmgt(struct fb_info *fb_info, unsigned size)
> -{
> -	struct imxfb_info *fbi = fb_info->priv;
> -
> -	if (fbi->memory_size != 0) {
> -		free(fb_info->screen_base);
> -		fb_info->screen_base = NULL;
> -		fbi->memory_size = 0;
> -	}
> -
> -	if (fbi->memory_size == 0) {
> -		fb_info->screen_base = xzalloc(size);
> -		fbi->memory_size = size;
> -	}
> -
> -	return 0;
> -}
> -
>  static void stmfb_enable_controller(struct fb_info *fb_info)
>  {
>  	struct imxfb_info *fbi = fb_info->priv;
> @@ -308,7 +290,6 @@ static int stmfb_activate_var(struct fb_info *fb_info)
>  	struct imx_fb_videomode *pdata = fbi->pdata;
>  	struct fb_videomode *mode = fb_info->mode;
>  	uint32_t reg;
> -	int ret;
>  	unsigned size;
>
>  	/*
> @@ -317,11 +298,8 @@ static int stmfb_activate_var(struct fb_info *fb_info)
>  	size = calc_line_length(mode->xres, fb_info->bits_per_pixel) *
>  		mode->yres;
>
> -	ret = stmfb_memory_mmgt(fb_info, size);
> -	if (ret != 0) {
> -		dev_err(fbi->hw_dev, "Cannot allocate framebuffer memory\n");
> -		return ret;
> -	}
> +	fb_info->screen_base = xrealloc(fb_info->screen_base, size);
> +	fbi->memory_size = size;
>
>  	/** @todo ensure HCLK is active at this point of time! */

Maybe we should change here from the x-functions to an allocation routine that 
returns NULL when there is not enough memory. When you define the malloc area 
to small and setup an SXGA resolution with 16 bit colour depth, barebox 
should IMHO bark with a useful error message than rebooting... 

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2011-01-15 15:02 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-14 19:51 some i.MX28 related patches Sascha Hauer
2011-01-14 19:51 ` [PATCH 1/7] fec i.MX28: Make it work with MMU on Sascha Hauer
2011-01-14 19:51 ` [PATCH 2/7] ARM tx28: Add mmu support Sascha Hauer
2011-01-14 19:51 ` [PATCH 3/7] video stm/mx2x: simplify memory allocation Sascha Hauer
2011-01-15 15:00   ` Juergen Beisert [this message]
2011-01-15 15:10     ` Sascha Hauer
2011-01-14 19:51 ` [PATCH 4/7] video stm/mx2x: allow to pass in fb memory from platform data Sascha Hauer
2011-01-15 15:04   ` Juergen Beisert
2011-01-14 19:51 ` [PATCH 5/7] provide real barebox end variable Sascha Hauer
2011-01-15  1:50   ` Jean-Christophe PLAGNIOL-VILLARD
2011-01-15 14:48     ` Sascha Hauer
2011-01-14 19:51 ` [PATCH 6/7] ARM i.MX28 tx28: use a fixed framebuffer address Sascha Hauer
2011-01-14 19:51 ` [PATCH 7/7] ARM i.MX28 tx28 defconfig: enable MMU Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201101151600.26944.jbe@pengutronix.de \
    --to=jbe@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox