From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2011.02.0
Date: Thu, 3 Feb 2011 10:48:49 +0100 [thread overview]
Message-ID: <20110203094849.GC9041@pengutronix.de> (raw)
Hi all,
v2011.02.0 is out. Here is what happened since the last release:
The following changes since commit d836124f8bbe05843a3f954727e6544a0fb96013:
Release v2011.01.0 (2011-01-06 11:25:35 +0100)
are available in the git repository at:
git://git.pengutronix.de/git/barebox.git master
Alexey Zaytsev (1):
Add basic support from ARM Versatile/PB
Baruch Siach (2):
remove redundant .gitignore entries
miidev: allow read/write of all registers
Fabio Porcedda (1):
xyzModem.c: fix 'dummy' is used uninitialized in this function warning
Jean-Christophe PLAGNIOL-VILLARD (2):
versatile: add missing env/config
at91sam9g45: fix ARCH_TEXT_BASE
Juergen Beisert (35):
STM/MCI: Fix wrong register bit
Make DIV_ROUND_UP macro globally available
Add macro for correct rounding in integer devisions
STM378x: Use Hz as the clock unit like in all other arch
STM378x: Do not configure any pin usage in the driver
STM378x: Parameterize the max. possible GPIO number
STM378x: Separate i.MX23 clock handling
IMX: Ignore i.MX23/i.MX28 related code in shared devices
STM378x: Add i.MX28 architecture
STM378x: Adapt the serial driver to support i.MX23 and i.MX28
STM378x: Adapt the MCI driver to support i.MX23 and i.MX28
Fixup the FEC driver files
MX28: add FEC support
STM378x: Add TX28 CPU module
STM378x: Add the TX28 Starterkit-5 baseboard
Add more useful generic macros
ARM Chumby: Fix memory index
ARM Chumby: Fix unit of the clocks after the change to Hz
ARM Chumby: Just fix some typos
Fix default framebuffer 'enable' set
Add the feature to change the video mode at runtime
ARM STM/i.MX: Add a pixel clock calculation routine for i.MX23/i.MX28
ARM STM/i.MX: Add video driver for i.MX23/i.MX28
ARM KARO-TX28-STK5: Add a user for video graphics support on i.MX28
ARM Chumby-Falconwing: Add a user for video graphics support on i.MX23
Fix a typo in the GPIO doc
ARM STM/i.MX: Fix register offset calculation for GPIO input pins
ARM STM/i.MX: Remove variable size restrictions in iomux managing routines
ARM STM/i.MX: Setting the iomux needs at least 32 bit.
ARM STM/i.MX: Just fix the docs
ARM STM/i.MX: Add support for the gpio commands
ARM STM/i.MX: Avoid very long lines
ARM STM/i.MX: Replace cryptic numbers
ARM Chumby: Add list of available GPIOs and their meaning
Fix default baudrate setting
Krzysztof Halasa (10):
Remove unused eth_get_name() prototype.
Flash CFI: removed unused 'size' variable.
Fix help text for "loadb" and "loady" commands.
Fix top-level Makefile to work with GNU make 3.82.
Cosmetic fixes, including format attributes for printf() and friends.
ARM: support big-endian processors.
Silence few warnings.
Fix NOR CFI flash driver to work on big endian systems.
Fix usage of __LITTLE_ENDIAN macro.
CFI NOR flash: fix write timeout units.
Marc Kleine-Budde (1):
Add generic poll infrastructure
Marc Reilly (3):
arm: update mach-types
imx: add IMX_GPIO_NR macro.
Put the explicit flash header sections back in.
Peter Korsgaard (1):
console_simple: add fprintf / console_list for commands/loadb.c
Sanjeev Premi (17):
omap3: Add macros to extract hawkeye and version
omap3: Detect cpu based on hawkeye
omap3: Update method to detect si revision
omap3: Add DPLL tables for silicon rev 1 and 2
omap3: Define separate functions for DPLL configuration
omap3: Select DPLL tables based on cpu revision
omap34x: Add suffix to DPLL tables and related function
omap36x: Add support for dynamic detection
omap36x: Detect silicon revisions
omap36x: Define structure for PER DPLL
omap36x: Add DPLL tables and functions to access them
omap36x: Define per domain functions for DPLL configuration
omap36x: Perform basic clock initialization
omap3: Avoid sudden change to SYS_CLK divider
omap3: Define GFX_DIV values for OMAP34xx and OMAP36xx
omap: echi: fix compile error
nand: Fix warnings due to incompatible format strings
Sascha Hauer (39):
ARM STM/i.MX: remove GENERIC_GPIO from ARCH_STM
ARM tx28stk5_defconfig: update config
cfi flash driver: check for ctrl-c during erase
basic LED support
LED: Add gpio LED support
LED: Add LED trigger support
LED: Add led command
LED: Add trigger command
ARM pcm043 board: Add LED support
Merge branch 'led' into next
Merge branch 'next'
i.MX: fix printf compiler warnings
net: fix printf compiler warnings
fec_imx: fix printf compiler warnings
nand: fix printf compiler warnings
cdev: fix printf compiler warnings
usb: add missing byteorder include
add to speed
eukrea_cpuimx35: fix printf compiler warnings
blackfin: fix printf compiler warnings
cs8900: fix printf compiler warnings
dm9000: fix printf compiler warnings
smc911x: fix printf compiler warnings
ipe337: fix printf compiler warnings
device tree: fix printf compiler warnings
netx: fix printf compiler warnings
guf-cupid: fix printf compiler warnings
pcm043: fix printf compiler warnings
at91: fix printf compiler warnings
ppc: fix printf compiler warnings
imx-esdhc: fix printf compiler warnings
mci-core: fix printf compiler warnings
imx-ipu-fb: fix printf compiler warnings
mpc5xxx: fix printf compiler warnings
i.MX nand: do not select NAND_IMX_BOOT
fb: update cdev map_base
Merge branch 'fb-master'
fb: When setting a mode, also update xres, yres and fb size
Release v2011.02.0
Wolfram Sang (1):
defaultenv: make 'boot' work from subdirs
.gitignore | 2 -
Documentation/boards.dox | 1 +
Makefile | 10 +-
arch/arm/Kconfig | 5 +
arch/arm/Makefile | 3 +
arch/arm/boards/chumby_falconwing/falconwing.c | 184 ++++++-
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 2 +-
arch/arm/boards/guf-cupid/board.c | 2 +-
arch/arm/boards/karo-tx28/Makefile | 2 +
arch/arm/boards/karo-tx28/config.h | 16 +
arch/arm/boards/karo-tx28/env/config | 47 ++
arch/arm/boards/karo-tx28/tx28-stk5.c | 377 ++++++++++++++
arch/arm/boards/karo-tx28/tx28.c | 156 ++++++
arch/arm/boards/pcm043/pcm043.c | 12 +-
arch/arm/boards/versatile/Kconfig | 10 +
arch/arm/boards/versatile/Makefile | 2 +
arch/arm/boards/versatile/config.h | 5 +
arch/arm/boards/versatile/env/config | 43 ++
arch/arm/boards/versatile/versatilepb.c | 72 +++
arch/arm/configs/chumbyone_defconfig | 4 +
arch/arm/configs/tx28stk5_defconfig | 46 ++
arch/arm/configs/versatilepb_defconfig | 48 ++
arch/arm/cpu/Kconfig | 3 +
arch/arm/cpu/start.c | 3 +
arch/arm/include/asm/hardware/arm_timer.h | 33 ++
arch/arm/mach-at91/Kconfig | 1 +
arch/arm/mach-at91/clock.c | 2 +-
arch/arm/mach-imx/Kconfig | 1 -
arch/arm/mach-imx/include/mach/generic.h | 2 +
arch/arm/mach-imx/include/mach/imx-flash-header.h | 12 +
arch/arm/mach-imx/include/mach/imx-regs.h | 4 +
arch/arm/mach-imx/speed-imx1.c | 20 +-
arch/arm/mach-imx/speed-imx21.c | 20 +-
arch/arm/mach-imx/speed-imx25.c | 20 +-
arch/arm/mach-imx/speed-imx27.c | 20 +-
arch/arm/mach-imx/speed-imx31.c | 4 +-
arch/arm/mach-imx/speed-imx35.c | 18 +-
arch/arm/mach-netx/generic.c | 2 +-
arch/arm/mach-omap/include/mach/omap3-clock.h | 33 +-
arch/arm/mach-omap/include/mach/omap3-silicon.h | 16 +-
arch/arm/mach-omap/include/mach/sys_info.h | 40 +-
arch/arm/mach-omap/omap3_clock.c | 547 ++++++++++++++++----
arch/arm/mach-omap/omap3_clock_core.S | 290 ++++++++----
arch/arm/mach-omap/omap3_generic.c | 89 +++-
arch/arm/mach-stm/Kconfig | 36 ++
arch/arm/mach-stm/Makefile | 6 +-
arch/arm/mach-stm/clocksource-imx28.c | 73 +++
arch/arm/mach-stm/{imx23.c => imx.c} | 0
arch/arm/mach-stm/imx_lcd_clk.c | 149 ++++++
arch/arm/mach-stm/include/mach/clock-imx23.h | 28 +
arch/arm/mach-stm/include/mach/clock-imx28.h | 31 ++
arch/arm/mach-stm/include/mach/clock.h | 22 +-
arch/arm/mach-stm/include/mach/fb.h | 43 ++
arch/arm/mach-stm/include/mach/generic.h | 6 +
arch/arm/mach-stm/include/mach/gpio.h | 11 +-
arch/arm/mach-stm/include/mach/imx-regs.h | 9 +
arch/arm/mach-stm/include/mach/imx23-regs.h | 1 +
arch/arm/mach-stm/include/mach/imx28-regs.h | 47 ++
arch/arm/mach-stm/include/mach/iomux-imx28.h | 552 +++++++++++++++++++++
arch/arm/mach-stm/{iomux-imx23.c => iomux-imx.c} | 114 ++++-
arch/arm/mach-stm/{reset-imx23.c => reset-imx.c} | 0
arch/arm/mach-stm/speed-imx23.c | 52 +-
arch/arm/mach-stm/speed-imx28.c | 392 +++++++++++++++
arch/arm/mach-versatile/Kconfig | 16 +
arch/arm/mach-versatile/Makefile | 2 +
arch/arm/mach-versatile/core.c | 224 +++++++++
arch/arm/mach-versatile/include/mach/clkdev.h | 7 +
arch/arm/mach-versatile/include/mach/debug_ll.h | 37 ++
arch/arm/mach-versatile/include/mach/init.h | 8 +
arch/arm/mach-versatile/include/mach/platform.h | 417 ++++++++++++++++
arch/arm/tools/mach-types | 385 ++++++++++++++-
arch/blackfin/boards/ipe337/cmd_alternate.c | 4 +-
arch/blackfin/lib/blackfin_linux.c | 2 +-
arch/blackfin/lib/traps.c | 2 +-
arch/ppc/lib/ppclinux.c | 2 +-
arch/ppc/mach-mpc5xxx/cpu.c | 2 +-
commands/Kconfig | 15 +
commands/Makefile | 2 +
commands/crc.c | 2 +-
commands/flash.c | 4 +-
commands/go.c | 2 +-
commands/gpio.c | 2 +-
commands/led.c | 90 ++++
commands/loadb.c | 3 +-
commands/ls.c | 4 +-
commands/menu.c | 2 +-
commands/nand.c | 2 +-
commands/trigger.c | 107 ++++
commands/xyzModem.c | 2 +-
common/Kconfig | 3 +
common/Makefile | 1 +
common/console.c | 8 +-
common/console_simple.c | 26 +-
common/ft_build.c | 2 +-
common/poller.c | 45 ++
common/startup.c | 2 +-
defaultenv/bin/boot | 4 +-
drivers/Kconfig | 1 +
drivers/Makefile | 1 +
drivers/led/Kconfig | 21 +
drivers/led/Makefile | 3 +
drivers/led/core.c | 157 ++++++
drivers/led/led-gpio.c | 94 ++++
drivers/led/led-triggers.c | 153 ++++++
drivers/mci/Kconfig | 4 +-
drivers/mci/imx-esdhc.c | 2 +-
drivers/mci/mci-core.c | 4 +-
drivers/mci/stm378x.c | 143 +++++-
drivers/mtd/nand/nand.c | 14 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/ubi/cdev.c | 2 +-
drivers/net/cs8900.c | 6 +-
drivers/net/dm9000.c | 12 +-
drivers/net/fec_imx.c | 101 +++-
drivers/net/fec_imx.h | 21 +-
drivers/net/miidev.c | 2 +-
drivers/net/netx_eth.c | 1 -
drivers/net/smc911x.c | 2 +-
drivers/nor/cfi_flash.c | 161 +++----
drivers/nor/cfi_flash.h | 25 +-
drivers/serial/Kconfig | 2 +-
drivers/serial/stm-serial.c | 9 +-
drivers/spi/imx_spi.c | 3 -
drivers/usb/host/ehci-omap.c | 2 +-
drivers/video/Kconfig | 7 +
drivers/video/Makefile | 1 +
drivers/video/fb.c | 52 ++-
drivers/video/imx-ipu-fb.c | 2 +-
drivers/video/stm.c | 540 ++++++++++++++++++++
include/common.h | 19 +
include/cramfs/cramfs_fs.h | 4 +-
include/fb.h | 3 +
include/led.h | 102 ++++
include/net.h | 4 +-
include/poller.h | 31 ++
include/stdio.h | 18 +-
include/usb/usb.h | 3 +-
lib/readline.c | 4 +-
lib/vsprintf.c | 4 +
net/eth.c | 10 +-
net/net.c | 20 +-
net/tftp.c | 2 +-
142 files changed, 6368 insertions(+), 643 deletions(-)
create mode 100644 arch/arm/boards/karo-tx28/Makefile
create mode 100644 arch/arm/boards/karo-tx28/config.h
create mode 100644 arch/arm/boards/karo-tx28/env/config
create mode 100644 arch/arm/boards/karo-tx28/tx28-stk5.c
create mode 100644 arch/arm/boards/karo-tx28/tx28.c
create mode 100644 arch/arm/boards/versatile/Kconfig
create mode 100644 arch/arm/boards/versatile/Makefile
create mode 100644 arch/arm/boards/versatile/config.h
create mode 100644 arch/arm/boards/versatile/env/config
create mode 100644 arch/arm/boards/versatile/versatilepb.c
create mode 100644 arch/arm/configs/tx28stk5_defconfig
create mode 100644 arch/arm/configs/versatilepb_defconfig
create mode 100644 arch/arm/include/asm/hardware/arm_timer.h
create mode 100644 arch/arm/mach-stm/clocksource-imx28.c
rename arch/arm/mach-stm/{imx23.c => imx.c} (100%)
create mode 100644 arch/arm/mach-stm/imx_lcd_clk.c
create mode 100644 arch/arm/mach-stm/include/mach/clock-imx23.h
create mode 100644 arch/arm/mach-stm/include/mach/clock-imx28.h
create mode 100644 arch/arm/mach-stm/include/mach/fb.h
create mode 100644 arch/arm/mach-stm/include/mach/imx28-regs.h
create mode 100644 arch/arm/mach-stm/include/mach/iomux-imx28.h
rename arch/arm/mach-stm/{iomux-imx23.c => iomux-imx.c} (50%)
rename arch/arm/mach-stm/{reset-imx23.c => reset-imx.c} (100%)
create mode 100644 arch/arm/mach-stm/speed-imx28.c
create mode 100644 arch/arm/mach-versatile/Kconfig
create mode 100644 arch/arm/mach-versatile/Makefile
create mode 100644 arch/arm/mach-versatile/core.c
create mode 100644 arch/arm/mach-versatile/include/mach/clkdev.h
create mode 100644 arch/arm/mach-versatile/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-versatile/include/mach/init.h
create mode 100644 arch/arm/mach-versatile/include/mach/platform.h
create mode 100644 commands/led.c
create mode 100644 commands/trigger.c
create mode 100644 common/poller.c
create mode 100644 drivers/led/Kconfig
create mode 100644 drivers/led/Makefile
create mode 100644 drivers/led/core.c
create mode 100644 drivers/led/led-gpio.c
create mode 100644 drivers/led/led-triggers.c
create mode 100644 drivers/video/stm.c
create mode 100644 include/led.h
create mode 100644 include/poller.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2011-02-03 9:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110203094849.GC9041@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox