From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1PszG0-0005Dj-3G for barebox@lists.infradead.org; Fri, 25 Feb 2011 15:07:00 +0000 Date: Fri, 25 Feb 2011 16:06:57 +0100 From: Sascha Hauer Message-ID: <20110225150657.GC29521@pengutronix.de> References: <4D665867.4010404@telemotive.de> <20110224160440.GQ7381@pengutronix.de> <4D677315.5090600@telemotive.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <4D677315.5090600@telemotive.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Install barebox on target To: Thomas Mayer Cc: barebox@lists.infradead.org On Fri, Feb 25, 2011 at 10:15:01AM +0100, Thomas Mayer wrote: > Hi Sascha, > > That's not quite correct. When you use the debug + personality board you > can boot directly from a mmc-card which contains bootloader, kernel and > rootfs without modifications. Only if you use the single personality > board, you have to modify die board a little bit. Ah, ok. I didn't know that. > Thanks for your short introduction. I tried to run the barebox image > with u-boot and it seems to work. But after I get the following output > barebox stops and do nothing. That's a bug in the support for multiple network devices. Please pull the -next branch again, then it should work. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox