From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from tango.tkos.co.il ([62.219.50.35]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1PvUpI-0000tE-QZ for barebox@lists.infradead.org; Fri, 04 Mar 2011 13:13:50 +0000 Date: Fri, 4 Mar 2011 15:13:29 +0200 From: Baruch Siach Message-ID: <20110304131329.GD3143@tarshish> References: <6EE7D1502C48E44E92DCADF9DD3E0DB9017FF3B0104E@SRV-VS06.TELEVIC.COM> <20110304083028.GC29521@pengutronix.de> <6EE7D1502C48E44E92DCADF9DD3E0DB9017FF3B0109C@SRV-VS06.TELEVIC.COM> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <6EE7D1502C48E44E92DCADF9DD3E0DB9017FF3B0109C@SRV-VS06.TELEVIC.COM> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: bootargs To: Vanalme Filip Cc: "barebox@lists.infradead.org" Hi Vanalme, On Fri, Mar 04, 2011 at 01:54:38PM +0100, Vanalme Filip wrote: > barebox 2010.12.0-00073-gfad11e8-dirty (Mar 3 2011 - 09:28:01) > > Board: Freescale i.MX27 PDK 3Stack > NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit) > Bad block table found at page 131008, version 0x01 > Bad block table found at page 130944, version 0x01 > PMIC Power > Enable FEC > Reset FEC > Malloc space: 0xa7b00000 -> 0xa7f00000 (size 4 MB) > Stack space : 0xa7af8000 -> 0xa7b00000 (size 32 kB) > running /env/bin/init... > > Hit any key to stop autoboot: 3 2 1 0 > loaded zImage from /dev/nand0.kernel.bb with size 1996604 > commandline: console=ttymxc0,115200 ip=dhcp rootfstype=jffs2 root=/dev/nfs nfsroot=10.0.48.80:/tftpboot/rootfs earlyprintk mtdparts=mxc_nand:256k(barebox)ro,128k(bareboxenv),2M(kernel),-(root) [snip] Removing "rootfstype=jffs2" might help. Just a guess. baruch > IP-Config: Got DHCP answer from 0.0.0.0, my address is 10.0.49.70 > IP-Config: Complete: > device=eth0, addr=10.0.49.70, mask=255.255.0.0, gw=10.0.127.254, > host=10.0.49.70, domain=televic.com, nis-domain=(none), > bootserver=0.0.0.0, rootserver=10.0.48.80, rootpath= > VFS: Unable to mount root fs via NFS, trying floppy. <======== ?? > List of all partitions: > 1f00 256 mtdblock0 (driver?) > 1f01 128 mtdblock1 (driver?) > 1f02 2048 mtdblock2 (driver?) > 1f03 259712 mtdblock3 (driver?) > No filesystem could mount root, tried: jffs2 > Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) > > > I checked the kernel's configuration and I think I have all NFS related items included. > A showmount -e 10.0.48.80 gives me : > /tftpboot/rootfs 10.0.0.0/255.255.0.0 > /home/user1/i.MX27/ltib/rootfs 10.0.0.0/255.255.0.0 > > So, I guess the mounting point is correct. > The bootargs also look OK to me. However, there's still something I miss here. -- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox