From: Sascha Hauer <s.hauer@pengutronix.de>
To: Omar Pighi <pighi@selea.com>
Cc: barebox@lists.infradead.org
Subject: Re: imx25 3 stack problem
Date: Mon, 11 Apr 2011 09:34:28 +0200 [thread overview]
Message-ID: <20110411073428.GD7285@pengutronix.de> (raw)
In-Reply-To: <4DA2AC28.3050802@selea.com>
Hi Omar,
On Mon, Apr 11, 2011 at 09:22:16AM +0200, Omar Pighi wrote:
> Hi,
>
> I downloaded the last version of barebox and using the tolchain
> downloaded from pengutronix (not the last one).
> i compiled with ARCH=arm and CROSS_COMPILER=....
> i configured it with make menuconfig
> than make
> put it on the nand flash using the ATK toolkit.
> try to boot (from NAND flash )but nothing happen....
> the hardware is working because if i do the same with the u-boot
> included with the BSP from freescale it works fine.
> reading the mailing list a lot of people is using barebox on imx25 , so
> it is my fault.... but what i can check? to fix it?
First thing to check is if barebox runs as second stage loader. Flash
U-Boot back to your board, load barebox.bin to ram and jump to this
address using U-Boots 'go' command.
The i.MX processors support internal and external boot modes. barebox
expects the board to be in internal boot mode. Are your jumpers set
correctly for this mode?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2011-04-11 7:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-11 7:22 Omar Pighi
2011-04-11 7:34 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110411073428.GD7285@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=pighi@selea.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox