From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: barebox v2011.05.0
Date: Fri, 6 May 2011 11:42:32 +0200 [thread overview]
Message-ID: <20110506094232.GB14770@pengutronix.de> (raw)
Hi all,
We have v2011.05.0 out now. Most notable is that we have a new
architecture in barebox: Nios2. Thanks Franck.
Sascha
Baruch Siach (2):
mtd/nand: increase page and oob size limits
mtd/nand_imx: add support for page size of 4k
Franck JULLIEN (2):
Add Nios2 arch support to barebox
Add a generic board template for the Nios2 arch
Jean-Christophe PLAGNIOL-VILLARD (1):
defaultenv: add kernel_loc nfs and tftp support
Juergen Beisert (9):
Change 'linux16' command to use getopt()
LINUX16: Add selection of the VESA video mode
LINUX16: Fix warning
S3C24xx/NFC: Re-enable the controller after NAND boot test
S3C24xx/NFC: Remove dead code
S3C24xx/NFC: Remove double function setup
S3C24xx/NFC: Consider correct NAND page size for boot.
S3C24xx/NFC: Setup ECC handling in accordance to the kernel
S3C24xx/NFC: Add OOB/ECC handling documentation for different NANDs
Marc Kleine-Budde (1):
fix printf warnings
Sascha Hauer (27):
mci stmp378x: remove ifdefed code
ARM Chumby: use a fixed framebuffer address
mci i.MX23/28: rename driver to mxs.c
mci mxs: put only once used function inline
mci mxs: give functions a uniq mxs_mci_ namespace
mci mxs: rename mci_pdata to host
mci mxs: make the mci_host a member of mxs_mci_host
mci mxs: no need to call mxs_mci_setup_clock_speed in init
ARM tx28stk5: limit mmc max frequency to 25MHz
Merge branch 'master' into next
ARM scb9328: Add gpio led support
ramfs: increase chunk size to 4 kbyte
ARM: create a second level page table entry for the exception vectors
ARM: Add stack unwinding support
kallsyms/printk: enable symbol printing support (%pS)
Merge branch 'master' into next
Merge branch 'next'
arm: update mach-types
driver: Do not forget to remove device from active list
memcpy command: do not set read/write size
mmc: check correctness of the voltage mask in ocr
fs: errno should be set correctly before the end of functions
usbnet: do not initialize ethernet device from usb device
ARM: Add missing parameter name
sandbox: Fix another uninitialized dev->id case
sandbox: make asm/swab.h nonempty
Release v2011.05.0
Makefile | 4 +-
arch/arm/Kconfig | 10 +
arch/arm/Makefile | 4 +
arch/arm/boards/a9m2410/a9m2410.c | 2 +-
arch/arm/boards/a9m2440/a9m2440.c | 2 +-
arch/arm/boards/at91sam9261ek/env/config | 4 +-
arch/arm/boards/at91sam9263ek/env/config | 4 +-
arch/arm/boards/at91sam9m10g45ek/env/config | 4 +-
arch/arm/boards/chumby_falconwing/falconwing.c | 14 +-
arch/arm/boards/eukrea_cpuimx25/env/config | 2 +-
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 5 -
arch/arm/boards/eukrea_cpuimx35/env/config | 2 +-
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 5 -
arch/arm/boards/eukrea_cpuimx51/env/config | 2 +-
arch/arm/boards/freescale-mx35-3-stack/env/config | 4 +-
arch/arm/boards/freescale-mx51-pdk/board.c | 6 -
arch/arm/boards/freescale-mx51-pdk/env/config | 4 +-
arch/arm/boards/guf-cupid/board.c | 6 -
arch/arm/boards/guf-cupid/env/config | 4 +-
arch/arm/boards/guf-neso/board.c | 5 -
arch/arm/boards/guf-neso/env/config | 4 +-
arch/arm/boards/karo-tx25/env/config | 4 +-
arch/arm/boards/karo-tx28/env/config | 4 +-
arch/arm/boards/karo-tx28/tx28-stk5.c | 7 +-
arch/arm/boards/karo-tx28/tx28.c | 5 -
arch/arm/boards/mini2440/env/config | 4 +-
arch/arm/boards/mini2440/mini2440.c | 2 +-
arch/arm/boards/nhk8815/env/config | 4 +-
arch/arm/boards/pcm037/env/config | 4 +-
arch/arm/boards/pcm037/pcm037.c | 5 -
arch/arm/boards/pcm038/env/config | 4 +-
arch/arm/boards/pcm038/pcm038.c | 5 -
arch/arm/boards/pcm043/env/config | 4 +-
arch/arm/boards/pcm043/pcm043.c | 6 -
arch/arm/boards/phycard-i.MX27/env/config | 4 +-
arch/arm/boards/phycard-i.MX27/pca100.c | 5 -
arch/arm/boards/pm9261/env/config | 4 +-
arch/arm/boards/pm9g45/env/config | 4 +-
arch/arm/boards/scb9328/scb9328.c | 24 +-
arch/arm/boards/versatile/env/config | 4 +-
arch/arm/cpu/interrupts.c | 4 +
arch/arm/cpu/mmu.c | 48 ++
arch/arm/include/asm/armlinux.h | 2 +-
arch/arm/include/asm/stacktrace.h | 16 +
arch/arm/include/asm/unwind.h | 54 +++
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/barebox.lds.S | 16 +
arch/arm/lib/unwind.c | 344 ++++++++++++++
arch/arm/mach-mxs/include/mach/mci.h | 2 +-
arch/arm/mach-s3c24xx/include/mach/s3c24x0-nand.h | 2 +-
arch/arm/tools/mach-types | 248 +++++++++--
arch/nios2/Kconfig | 39 ++
arch/nios2/Makefile | 25 +
arch/nios2/boards/generic/Makefile | 1 +
arch/nios2/boards/generic/config.h | 63 +++
arch/nios2/boards/generic/env/config | 16 +
arch/nios2/boards/generic/generic.c | 74 +++
arch/nios2/boards/generic/nios_sopc.h | 406 ++++++++++++++++
arch/nios2/configs/generic_defconfig | 23 +
arch/nios2/cpu/Makefile | 6 +
arch/nios2/cpu/barebox.lds.S | 124 +++++
arch/nios2/cpu/cpu.c | 38 ++
arch/nios2/cpu/exceptions.S | 160 +++++++
arch/nios2/cpu/interrupts.c | 140 ++++++
arch/nios2/cpu/start.S | 165 +++++++
arch/nios2/cpu/traps.c | 43 ++
arch/nios2/include/asm/barebox.h | 4 +
arch/nios2/include/asm/bitops.h | 4 +
arch/nios2/include/asm/bitsperlong.h | 1 +
arch/nios2/include/asm/byteorder.h | 1 +
arch/nios2/include/asm/cache.h | 21 +
arch/nios2/include/asm/common.h | 4 +
arch/nios2/include/asm/dma-mapping.h | 25 +
arch/nios2/include/asm/early_printf.h | 10 +
arch/nios2/include/asm/elf.h | 165 +++++++
arch/nios2/include/asm/int-ll64.h | 78 +++
arch/nios2/include/asm/io.h | 52 ++
arch/nios2/include/asm/nios2-io.h | 182 +++++++
arch/nios2/include/asm/nios2.h | 63 +++
arch/nios2/include/asm/opcodes.h | 131 +++++
arch/nios2/include/asm/posix_types.h | 77 +++
arch/nios2/include/asm/ptrace.h | 33 ++
arch/nios2/include/asm/sections.h | 1 +
arch/nios2/include/asm/string.h | 47 ++
arch/nios2/include/asm/swab.h | 4 +
arch/nios2/include/asm/system.h | 64 +++
arch/nios2/include/asm/types.h | 7 +
arch/nios2/lib/Makefile | 6 +
arch/nios2/lib/board.c | 47 ++
arch/nios2/lib/cache.c | 77 +++
arch/nios2/lib/clock.c | 62 +++
arch/nios2/lib/early_printf.c | 56 +++
arch/nios2/lib/libgcc.c | 527 +++++++++++++++++++++
arch/nios2/lib/longlong.h | 258 ++++++++++
arch/sandbox/board/hostfile.c | 1 +
arch/sandbox/include/asm/swab.h | 6 +
commands/linux16.c | 54 ++-
commands/mem.c | 2 +-
common/Kconfig | 3 -
common/kallsyms.c | 148 ++++++-
defaultenv/bin/boot | 13 +-
drivers/mci/Kconfig | 2 +-
drivers/mci/Makefile | 2 +-
drivers/mci/mci-core.c | 12 +-
drivers/mci/{stm378x.c => mxs.c} | 285 +++++------
drivers/mtd/nand/nand_imx.c | 2 +-
drivers/mtd/nand/nand_s3c2410.c | 131 ++++--
drivers/net/usb/usbnet.c | 1 -
fs/fs.c | 5 +-
fs/ramfs.c | 2 +-
include/kallsyms.h | 5 +
include/linux/mtd/nand.h | 4 +-
include/stdio.h | 5 +
lib/driver.c | 1 +
lib/vsprintf.c | 1 +
115 files changed, 4588 insertions(+), 365 deletions(-)
create mode 100644 arch/arm/include/asm/stacktrace.h
create mode 100644 arch/arm/include/asm/unwind.h
create mode 100644 arch/arm/lib/unwind.c
create mode 100644 arch/nios2/Kconfig
create mode 100644 arch/nios2/Makefile
create mode 100644 arch/nios2/boards/generic/Makefile
create mode 100644 arch/nios2/boards/generic/config.h
create mode 100644 arch/nios2/boards/generic/env/config
create mode 100644 arch/nios2/boards/generic/generic.c
create mode 100644 arch/nios2/boards/generic/nios_sopc.h
create mode 100644 arch/nios2/configs/generic_defconfig
create mode 100644 arch/nios2/cpu/Makefile
create mode 100644 arch/nios2/cpu/barebox.lds.S
create mode 100644 arch/nios2/cpu/cpu.c
create mode 100644 arch/nios2/cpu/exceptions.S
create mode 100644 arch/nios2/cpu/interrupts.c
create mode 100644 arch/nios2/cpu/start.S
create mode 100644 arch/nios2/cpu/traps.c
create mode 100644 arch/nios2/include/asm/barebox.h
create mode 100644 arch/nios2/include/asm/bitops.h
create mode 100644 arch/nios2/include/asm/bitsperlong.h
create mode 100644 arch/nios2/include/asm/byteorder.h
create mode 100644 arch/nios2/include/asm/cache.h
create mode 100644 arch/nios2/include/asm/common.h
create mode 100644 arch/nios2/include/asm/dma-mapping.h
create mode 100644 arch/nios2/include/asm/early_printf.h
create mode 100644 arch/nios2/include/asm/elf.h
create mode 100644 arch/nios2/include/asm/int-ll64.h
create mode 100644 arch/nios2/include/asm/io.h
create mode 100644 arch/nios2/include/asm/nios2-io.h
create mode 100644 arch/nios2/include/asm/nios2.h
create mode 100644 arch/nios2/include/asm/opcodes.h
create mode 100644 arch/nios2/include/asm/posix_types.h
create mode 100644 arch/nios2/include/asm/ptrace.h
create mode 100644 arch/nios2/include/asm/sections.h
create mode 100644 arch/nios2/include/asm/string.h
create mode 100644 arch/nios2/include/asm/swab.h
create mode 100644 arch/nios2/include/asm/system.h
create mode 100644 arch/nios2/include/asm/types.h
create mode 100644 arch/nios2/lib/Makefile
create mode 100644 arch/nios2/lib/board.c
create mode 100644 arch/nios2/lib/cache.c
create mode 100644 arch/nios2/lib/clock.c
create mode 100644 arch/nios2/lib/early_printf.c
create mode 100644 arch/nios2/lib/libgcc.c
create mode 100644 arch/nios2/lib/longlong.h
rename drivers/mci/{stm378x.c => mxs.c} (69%)
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2011-05-06 9:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110506094232.GB14770@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox